Concentrations and compositions of organochlorine contaminants in sediments, soils, crustaceans, fishes and birds collected from Lake Tai, Hangzhou Bay and Shanghai city region, China

Contamination by persistent organochlorines (OCs), such as DDTs, hexachlorocyclohexane isomers (HCHs), chlordane compounds (CHLs), hexachlorobenzene (HCB) and polychlorinated biphenyls (PCBs) were examined in sediments, soils, fishes, crustaceans, birds, and aquaculture feed from Lake Tai, Hangzhou Bay, and in the vicinity of Shanghai city in China during 2000 and 2001. OCs were detected in all samples analyzed, and DDT and its metabolites were the predominant contaminants in most sediments, soils and biota. Concentrations of p,p'-DDT and ratio of p,p'-DDT to SigmaDDTs were significantly higher in marine fishes than those in freshwater fishes. While the use of DDTs has been officially banned in China since 1983, these results indicate a recent input of technical DDTs into the marine environment around Hangzhou Bay. Comparison of organochlorine concentrations in fishes collected from Lake Tai and Hangzhou Bay suggests the presence of local sources of HCHs, chlordanes and PCBs at Lake Tai. Higher proportions of penta- and hexa-PCB congeners in fishes at Lake Tai may suggest the use of highly chlorinated PCB product, such as PCB(5), around this lake. To our knowledge, this is a first comprehensive study to examine the present status of organochlorine contamination in various environmental media, such as sediments, soils and wildlife, in China.     

Control of mercury emissions from a municipal solid waste incinerator in Japan

The control of Hg emissions from a municipal solid waste incinerator (MSWI) is very important, because more than 78% of municipal solid waste (MSW) is incinerated. The Hg content of coal used in utility boilers is relatively low in Japan. In this study, recent trends in the Hg content of MSW in Japan and activated carbon (AC) injection as a control technology of Hg emission from an MSWI are discussed. The effect of AC injection on Hg removal from flue gas in an MSWI was investigated by pilot-scale experiments using a bag filter (BF). The injection of AC increases the Hg reduction ratio by 20-30% compared with cases without AC injection. The Hg reduction ratio increases as the flue gas temperature decreases. The Hg reduction ratio is closely related to the inlet Hg concentration and was expressed with a Langmuir-type adsorption isotherm.     

Simultaneous determination of 2-phenylbenzotriazole-type mutagens, PBTA-1 through -8, in river water by liquid chromatography-tandem mass spectrometry

We describe a method for the simultaneous determination of eight kinds of phenylbenzotriazole-type mutagens (PBTA-1, -2, -3, -4, -5, -6, -7 and -8) in river water based on liquid chromatography-tandem mass spectrometry (LC/MS/MS). The application of dopant-assisted atmospheric pressure photoionization (APPI) for the detection of the PBTAs was studied. The APPI technique provided higher PBTA signal intensities than those obtained with an electrospray ionization (ESI) source, and the APPI method was used for the determination of the PBTAs. A solid-phase extraction procedure was used for the extractions of PBTA-1 through -8 from river water. The procedure was rapid and the relative standard deviations were below 15%. The detection limits of PBTA-1 through -8 in river water using the proposed method were found to range from 0.04 to 0.5 ng L(-1) and PBTAs were successfully detected in river water at sub-ng L(-1) levels.     

Adsorption of Cu and Mn on covalently cross-linked alginate gel beads

The covalently cross-linked alginate gel beads were prepared by the reactions of Ca(2+)-doped alginate gel beads, which were formed by spraying a viscous alginate solution into a calcium chloride solution, with cyanogen bromide and following 1,6-diaminohexane. The cross-linking of alginate matrix decreased the mean bead diameter by about 30% and made the beads durable in some extent under alkaline conditions. The adsorption of metal ions on the covalently cross-linked alginate gel beads was rapid and reached at equilibrium within 30 min at 25 degrees C. Adsorption isotherms of Cu(II), Mn(II), and Ca2+ on the beads possessed a stepwise shape, which was firstly determined by Rorrer et al. [Ind. Eng. Chem. Res. 32 (1993) 2170] for cross-linked chitosan gel beads and explained by a pore-blockage mechanism. Higher selectivity was determined against Cu(II) over Mn(II) and Ca2+, especially at a low concentration region. These metal adsorption profiles for the covalently cross-linked alginate gel beads was almost the same as those for the un-cross-linked beads, indicating that the cross-linking reactions were performed without interfering the adsorption characteristics of alginate gel beads.     

Effects of copper chloride on formation of polychlorinated dibenzofurans in model waste incineration in a laboratory-scale fluidized-bed reactor

Combustion experiments in a laboratory-scale fluidized-bed reactor have been performed to clarify the effects of copper chloride as a catalyst on polychlorinated dibenzofurans (PCDFs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl2 x 2H2O) as a catalyst, both of which contained polyvinyl chloride (PVC) as a chlorine source. Combustion temperature was set to 900 degrees C, and the amount of air supplied was twice as much as the theoretical amount. The experimental setup had been carefully planned to ensure avoidance of the influences of previous experiments. Results of these present experiments revealed that copper chloride in the waste increased the amount of PCDFs formed and made the homologue profile shifted towards the highly chlorinated species. Copper chloride contributes to PCDFs formation by promoting chlorination via catalytic reactions, whereby the reaction could be important in that organic matters are chlorinated directly by chlorinated compounds related to Deacon reaction such as copper chloride. It was elucidated that characteristic isomer distribution patterns appeared in case the waste contained copper chloride. It is probable in our experiment with copper chloride that PCDFs are mainly formed via catalytic reactions of copper compounds and carbon.     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Observations of dugong reproductive behavior in Trang Province,Thailand: further evidence of intraspecific variation in dugong behavior

The seagrass beds at Muk Island and Talibong Island in Thailand are important areas for dugong (Dugong dugon) feeding and reproduction. We used opportunistic observations during aerial surveys to investigate dugong mating behavior in shallow water areas near Talibong Island on three different days. The mating pattern was categorized by five stages: (1) following: the male followed the female, (2) approaching and stimulating: the male approached and muzzled the female, (3) pairing: both male and female swam in parallel, ventral to ventral or dorsal to dorsal side, (4) mounting: the male copulated with the female, and (5) separating: the male and female swam in different directions. Parental care of calves included one observation of a cow embracing her neonatal calf by the flippers.     

Effects of red-yellow soil acidification on seed germination of Chinese pine

Acid treatments significantly change the physical and chemical properties of red-yellos soil by lowering its pH value and leaching out aluminum(Al) ions that are harmful to the growth of plants.The structure of soil will be damaged,resulting in higher viscosity,higher water retention rate and lower air permeability of the soil.The germination rate of Chinese pine(Pinus tabulacformic Carr.)seeds sowed in soil treated with sulphuric acid(H2SO4) decreased compared to that for untreated soil.The direct cause was the large amount of Al ions leached out because of low pH values(≥3.5).The added acid decreased the soil aggregation and increased the number of micro-aggregates(under 250 μmin diameter).Such changes increased the soil‘s viscosity,which tied the pine needles to the soil after the seeds had germinated and prevented the seedlings from fully developing.