Risk perception in Northeast Asia

Multi-country surveys of the public's perception of risk using the same questionnaire were sequentially implemented from April to December 2006 in Japan, China, and South Korea. Statistical analyses, such as traditional mean tests, rank order tests, two-step cluster analysis, and principal component analysis were used to analyze the survey data. The results revealed that Chinese tend to be more tolerant of risk than Japanese and South Koreans. In all three countries, the threats of global warming, cancer, traffic accidents, and fire were perceived as higher-order risks, while infectious diseases and threats from high technology were perceived as lower-order risks. Looking across the entire multi-country sample, we found that Chinese participants perceived greater risk in typhoons, SARS, and drugs; Japanese saw greater risk from gas explosions and potential threats coming over the Internet; while people in all three countries identified earthquakes as a primary risk. These differences in risk perception reflect the natural and socioeconomic conditions in the three countries. Although the study did not emphasize differences in risk perception within countries based on demographic factors such as education, age, and gender, we found that differences based on education and age tended to be greater in China and South Korea than in Japan. We also found that men perceived greater risks than women in China and South Korea, while in Japan it was the opposite with women perceiving greater risks. A comparison of these results with previous studies reveals a bias in past studies toward student samples and indicates the need for more representative samples in multi-country surveys.     

Preparation of Chitin/Cellulose Films Compatibilized with Polymeric Ionic Liquids

This paper reports the preparation of chitin/cellulose films compatibilized with polymeric ionic liquids. In-situ (co)polymerization of polymerizable ionic liquids, 1-(3-methacryloyloxypropyl)-3-vinylimidazolium bromide (1) and 1-methyl-3-vinylbenzylimidazolium chloride (3), was carried out in the presence of a radical initiator, AIBN, in the chitin/cellulose solution with ionic liquid solvents (1-butyl-3-methylimidazolium acetate and chloride, BMIMOAc and BMIMCl, respectively), followed by the appropriate procedure to give the desired films. The presence of the polymeric ionic liquid in the film was confirmed by the IR measurement. The powder X-ray diffraction analysis suggested that crystalline structures of the polysaccharides were largely disrupted in the film, as same as that of a chitin/cellulose film prepared by the AMIMOAc/BMIMCl system. These results were different from the XRD result of a chitin/cellulose film prepared by the 1-allyl-3-methylimidazolium bromide/BMIMCl system reported in our previous study, in which some crystalline structures were still remained in the film. Furthermore, the mechanical properties of the present films were evaluated by tensile testing, which were affected by the molar ratios of the polymeric ionic liquids to the polysaccharides and the compositional ratios of the two units 1 and 3.     

Concentration levels and congener profiles of polychlorinated biphenyls, pentachlorobenzene, and hexachlorobenzene in commercial pigments

The concentration levels and congener profiles of polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz) were assessed in commercially available organic pigments. Among the azo-type pigments tested, PCB-11, which is synthesized from 3,3′-dichlorobendizine, and PCB-52, which is synthesized from 2,2′,5,5′-tetrachlorobendizine, were the major congeners detected. It is speculated that these were byproducts of chlorobendizine, which has a very similar structure. The total PCB concentrations in this type of pigment ranged from 0.0070 to 740 mg/kg. Among the phthalocyanine-type pigments, highly chlorinated PCBs, mainly composed of PCB-209, PeCBz, and HxCBz were detected. Their concentration levels ranged from 0.011 to 2.5 mg/kg, 0.0035 to 8.4 mg/kg, and 0.027 to 75 mg/kg, respectively. It is suggested that PeCBz and HxCBz were formed as byproducts and converted into PCBs at the time of synthesizing the phthalocyanine green. For the polycyclic-type pigments that were assessed, a distinctive PCB congener profile was detected that suggested an impact of their raw materials and the organic solvent used in the pigment synthesis. PCB pollution from PCB-11, PCB-52, and PCB-209 pigments is of particular concern; therefore, the monthly variations in atmospheric concentrations of these pollutants were measured in an urban area (Sapporo city) and an industrial area (Muroran city). The study detected a certain level of PCB-11, which is not included in PCB technical mixtures, and revealed continuing PCB pollution originating from pigments in the ambient air.     

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183)

2,2′,3,5′,6-Pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.     

Robust ridge regression for estimating the effects of correlated gene expressions on phenotypic traits

Statistical packages such as edgeR and DESeq are intended to detect genes that are relevant to phenotypic traits and diseases. A few studies have also modeled the relationships between gene expressions and traits. In the presence of multicollinearity and outliers, which are unavoidable in genetic data, the robust ridge regression estimator can be applied with the trait value as the response variable and the gene expressions as explanatory variables. In some simulation scenarios, the robust ridge estimator is resistant to outliers and less susceptible to multicollinearity than the ordinary least-squares (OLS) estimator. This study investigated the reliability of the robust ridge estimator, in a scenario where the explanatory variables have tail-dependence and negative binomial distributions, by comparing its performance to that of OLS using vine copula to model the tail-dependence among gene expressions. The robust ridge estimator and OLS were both applied to an ecological dataset. First, statistical analysis was used to compare RNA sequencing data between two treatments; then, 15 differentially expressed genes were selected. Next, the regression parameter estimates of robust ridge and OLS for the effects of the 15 contigs (explanatory variables) on trait values (response variables) were compared. Robust ridge regression was found to detect fewer positive and negative slopes than OLS regression. These results indicate that robust ridge regression can be successfully applied for RNA sequencing analysis to estimate the effect of trait-associated genes using real data, and holds great promise as a tool for modeling the association between RNA expression and phenotypic traits.     

Formation characteristics of PCDD and PCDF during pyrolysis processes

In recent years, pyrolysis processes have become technologies developed to industrial scale and discussed as alternatives to the existing waste combustion technology. However, little information is published regarding PCDD/F formation characteristics during pyrolysis processes. Two common shredder fractions – industrial light shredder (ILS) and refrigerators (REF) – both with high chlorine and copper content were pyrolysed for this pyrolysis study using a pilot plant with a capacity of 100 kg/h. At oxygen concentrations below 2% and temperatures between 430°C and 470°C, considerable amounts of PCDD/F were formed during the pyrolysis. More than 90% of total TEQ was found in the oil fraction (gas phase). The PCDD/PCDF ratio and the homologue pattern differed significantly from those formed during waste incineration. Considering mono- to octachlorinated congeners, up to 400 times more PCDF were formed compared to PCDD. For the investigated pyrolysis conditions, the formation of low chlorinated congeners was highly favoured. The distribution of TEQ within the individual congeners were very similar in all investigated runs. More than 80% of total TEQ stem from 2,3,7,8-substituted T₄CDF and P₅CDF. The isomer pattern, however, did not show significant differences compared to the common waste incineration pattern suggesting that the basic formation routes are similar.     

Simultaneous determination of 2-phenylbenzotriazole-type mutagens, PBTA-1 through -8, in river water by liquid chromatography-tandem mass spectrometry

We describe a method for the simultaneous determination of eight kinds of phenylbenzotriazole-type mutagens (PBTA-1, -2, -3, -4, -5, -6, -7 and -8) in river water based on liquid chromatography-tandem mass spectrometry (LC/MS/MS). The application of dopant-assisted atmospheric pressure photoionization (APPI) for the detection of the PBTAs was studied. The APPI technique provided higher PBTA signal intensities than those obtained with an electrospray ionization (ESI) source, and the APPI method was used for the determination of the PBTAs. A solid-phase extraction procedure was used for the extractions of PBTA-1 through -8 from river water. The procedure was rapid and the relative standard deviations were below 15%. The detection limits of PBTA-1 through -8 in river water using the proposed method were found to range from 0.04 to 0.5 ng L(-1) and PBTAs were successfully detected in river water at sub-ng L(-1) levels.     

Improvement in the feeding method to an inclined conveyor designed for the recycling of foundry sand

 The goal of the inclined conveyor method for particle shape separation is to process a large amount of feed material for recycling technology. The high feed rate has been achieved because the movement of particles is faster than for other previously introduced equipment. The separation performance of the apparatus was tested with foundry sand. A large amount of sand was treated, and various processing capacities were studied experimentally. The feed method was improved from point to line with wide troughs to process the higher feed rate. We succeeded in attaining a feed rate of 1.49 × 10⁻³ kg/s with a 0.3-m trough. The space filling, which was an important factor in deciding the capacity of the feed rate, was defined. This method is useful for any kind of line-feed method. Received: March 25, 2002 / Accepted: August 5, 2002