Adsorption of Cu and Mn on covalently cross-linked alginate gel beads

The covalently cross-linked alginate gel beads were prepared by the reactions of Ca(2+)-doped alginate gel beads, which were formed by spraying a viscous alginate solution into a calcium chloride solution, with cyanogen bromide and following 1,6-diaminohexane. The cross-linking of alginate matrix decreased the mean bead diameter by about 30% and made the beads durable in some extent under alkaline conditions. The adsorption of metal ions on the covalently cross-linked alginate gel beads was rapid and reached at equilibrium within 30 min at 25 degrees C. Adsorption isotherms of Cu(II), Mn(II), and Ca2+ on the beads possessed a stepwise shape, which was firstly determined by Rorrer et al. [Ind. Eng. Chem. Res. 32 (1993) 2170] for cross-linked chitosan gel beads and explained by a pore-blockage mechanism. Higher selectivity was determined against Cu(II) over Mn(II) and Ca2+, especially at a low concentration region. These metal adsorption profiles for the covalently cross-linked alginate gel beads was almost the same as those for the un-cross-linked beads, indicating that the cross-linking reactions were performed without interfering the adsorption characteristics of alginate gel beads.     

Effects of copper chloride on formation of polychlorinated dibenzofurans in model waste incineration in a laboratory-scale fluidized-bed reactor

Combustion experiments in a laboratory-scale fluidized-bed reactor have been performed to clarify the effects of copper chloride as a catalyst on polychlorinated dibenzofurans (PCDFs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl2 x 2H2O) as a catalyst, both of which contained polyvinyl chloride (PVC) as a chlorine source. Combustion temperature was set to 900 degrees C, and the amount of air supplied was twice as much as the theoretical amount. The experimental setup had been carefully planned to ensure avoidance of the influences of previous experiments. Results of these present experiments revealed that copper chloride in the waste increased the amount of PCDFs formed and made the homologue profile shifted towards the highly chlorinated species. Copper chloride contributes to PCDFs formation by promoting chlorination via catalytic reactions, whereby the reaction could be important in that organic matters are chlorinated directly by chlorinated compounds related to Deacon reaction such as copper chloride. It was elucidated that characteristic isomer distribution patterns appeared in case the waste contained copper chloride. It is probable in our experiment with copper chloride that PCDFs are mainly formed via catalytic reactions of copper compounds and carbon.     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Observations of dugong reproductive behavior in Trang Province,Thailand: further evidence of intraspecific variation in dugong behavior

The seagrass beds at Muk Island and Talibong Island in Thailand are important areas for dugong (Dugong dugon) feeding and reproduction. We used opportunistic observations during aerial surveys to investigate dugong mating behavior in shallow water areas near Talibong Island on three different days. The mating pattern was categorized by five stages: (1) following: the male followed the female, (2) approaching and stimulating: the male approached and muzzled the female, (3) pairing: both male and female swam in parallel, ventral to ventral or dorsal to dorsal side, (4) mounting: the male copulated with the female, and (5) separating: the male and female swam in different directions. Parental care of calves included one observation of a cow embracing her neonatal calf by the flippers.     

Effects of red-yellow soil acidification on seed germination of Chinese pine

Acid treatments significantly change the physical and chemical properties of red-yellos soil by lowering its pH value and leaching out aluminum(Al) ions that are harmful to the growth of plants.The structure of soil will be damaged,resulting in higher viscosity,higher water retention rate and lower air permeability of the soil.The germination rate of Chinese pine(Pinus tabulacformic Carr.)seeds sowed in soil treated with sulphuric acid(H2SO4) decreased compared to that for untreated soil.The direct cause was the large amount of Al ions leached out because of low pH values(≥3.5).The added acid decreased the soil aggregation and increased the number of micro-aggregates(under 250 μmin diameter).Such changes increased the soil‘s viscosity,which tied the pine needles to the soil after the seeds had germinated and prevented the seedlings from fully developing.     

Release behavior of arsenic,chromium, and copper during heat treatments of CCA-treated wood

Journal of Material Cycles and Waste Management - Biomass has been attracting attention as an environmentally friendly energy resource due to concerns about global environmental problems. Chromated...     

Formation characteristics of PCDD and PCDF during pyrolysis processes

In recent years, pyrolysis processes have become technologies developed to industrial scale and discussed as alternatives to the existing waste combustion technology. However, little information is published regarding PCDD/F formation characteristics during pyrolysis processes. Two common shredder fractions – industrial light shredder (ILS) and refrigerators (REF) – both with high chlorine and copper content were pyrolysed for this pyrolysis study using a pilot plant with a capacity of 100 kg/h. At oxygen concentrations below 2% and temperatures between 430°C and 470°C, considerable amounts of PCDD/F were formed during the pyrolysis. More than 90% of total TEQ was found in the oil fraction (gas phase). The PCDD/PCDF ratio and the homologue pattern differed significantly from those formed during waste incineration. Considering mono- to octachlorinated congeners, up to 400 times more PCDF were formed compared to PCDD. For the investigated pyrolysis conditions, the formation of low chlorinated congeners was highly favoured. The distribution of TEQ within the individual congeners were very similar in all investigated runs. More than 80% of total TEQ stem from 2,3,7,8-substituted T₄CDF and P₅CDF. The isomer pattern, however, did not show significant differences compared to the common waste incineration pattern suggesting that the basic formation routes are similar.     

A simulation model for Japanese sardine (Sardinops melanostictus) migrations in the western North Pacific

A two-dimensional individual-based model coupled with fish bioenergetics was developed to simulate migration and growth of Japanese sardine (Sardinops melanostictus) in the western North Pacific. In the model, fish movement is controlled by feeding and spawning migrations with passive transport by simulated ocean current. Feeding migration was assumed to be governed by search for local optimal habitats, which is estimated by the spatial distribution of net growth rate of a sardine bioenergetics model. The forage density is one of the most important factors which determines the geographical distributions of Japanese sardine during their feeding migrations. Spawning migration was modeled by an artificial neural network (ANN) with an input layer composed of five neurons that receive environmental information (surface temperature, temperature change experienced, current speed, day length and distance from land). Once the weight of the ANN was determined, the fish movement was solved by combining with the feeding migration model. To obtain the weights of the ANN, three experiments were conducted in which (1) the ANN was trained with back propagation (BP) method with optimum training data, (2) genetic algorithm (GA) was used to adjust the weights and (3) the weights of the ANN were decided by the GA with BP, respectively. BP is a supervised learning technique for training ANNs. GA is a search technique used in computing to find approximate solutions, such as optimization of parameters. Condition factor of sardine in the model is used as a factor of optimization in the GA works. The methods using only BP or GA did not work to search the appropriate weights in the ANN for spawning migration. In the third method, which is a combined approach of GA with BP, the model reproduced the most realistic spawning migration of Japanese sardine. The changes in temperature and day length are important factors for the orientation cues of Japanese sardine according to the sensitivity analysis of the weights of the ANN.     

PnET-CN模型对东亚森林生态系统碳通量模拟的适用性和不确定性分析

东亚地区森林类型多样,开展区域生态系统碳循环模拟时应考虑森林类型的差异。论文利用基于叶氮浓度-最大净光合作用速率关系的PnET-CN模型,对东亚地区8 个森林生态系统通量观测站点的总生态系统碳交换（GEE）和生态系统呼吸（RE）进行模拟,以探讨模型的适用性并对不确定性来源进行分析。研究结果表明：①PnET-CN模型能较为准确地模拟东亚地区大部分森林生态系统站点的GEE和RE;②模型的适用性排序依次为温带、寒温带、亚热带、 热带,模型未能很好地模拟热带湿地森林GEE和RE 的季节与年际变异;③在同一气候区中,PnET-CN模型更加适用于针叶林碳交换的模拟;④PnET-CN模型比较准确地反映了东亚森林生态系统GEE、RE对气候因子（例如,温度或辐射）的响应,但在低温、较弱辐射条件下模型低估了GEE,在高温或较强辐射条件下高估了GEE;在低温条件下模型低估了RE,在高温条件下模型高估了RE。针对东亚多个森林通量站点的模拟情况,论文提出模型应在以下方面进行改进：①PnET-CN模型计算物候时除了考虑温度之外还应加入土壤湿度的影响,并对不同气候区森林生态系统赋予不同叶片凋落时长;②PnET-CN模型中温度对GEE的限制以及光合最适温度应该根据不同站点设置;③PnET-CN模型应该考虑森林生态系统对环境胁迫的适应性,加强对干旱等干扰的模拟;④同时对于拥有复杂水文条件的森林生态系统应该改进土壤含水量的算法,以准确反映该类型森林生态系统GEE和RE的季节变化。