旋流板塔内石灰湿法烟气脱硫的试验研究

试验研究了在旋流板塔内以石灰湿法进行烟气脱硫率的影响，并对试验结果进行了分析讨论，得出了回归关联式。本研究为工业装置的设计、操作和运行提供了所必需的基础数据。     

GC-MS identification of gaseous volatiles in wastewater

Gaseous volatiles from wastewater samples taken from a local sewage treatment plant were air-stripped and trapped onto Tenax GC. These volatiles were then thermally desorbed and subsequently analyzed using a gas chromatograph coupled to a mass spectrometer (GC-MS). The results show that saturated aliphatic and aromatic hydrocarbons were the most dominant compounds found in the sewage gaseous volatiles. Other compounds found were chlorinated hydrocarbons, organic acids, sulfides and phenols. A wide variety of gaseous volatiles were found in the raw wastewater, the primary clarifier effluent, the pre-aeration wastewater and the sludge samples. A comparison of the gas chromatograms for the pre- and post-aeration wastewater shows that many odorous gaseous volatiles were removed during the aeration process in the treatment plant.     

Noise surveys of hand-held pneumatic rock drills in Hong Kong

A study of the noise generated by hand-held pneumatic rock drills at 15 road works locations in Hong Kong was conducted in 1989. The locations of road construction works were identified over one week period. Sound pressure levels (SPL) and band frequency analysis were measured with the integrated sound level meter at the level of the operator's ears. The sound levels for all 15 operators exceeded the local statutory limit of 90 dBA. The average sound level was 107.4 dBA and the corresponding continuous equivalent level adjusted to 8 hours or L _eq (8h) was 104.8 dBA. The sound levels for the octave frequencies from 125 Hertz to 8000 Hertz were all in excess of 90 dBA. Estimates of the risk of developing hearing impairment for conversation speech among the operators were 18% and 42% after 5 and 10 years of exposure, respectively. Although there is adequate statutory control to restrict and reduce the hazards caused by noise at road construction works to the workers and to the public at large, no noise control measures were noted at the work sites and none of the operators used hearing protection. This situation was compounded by the short-term nature of road works and the high mobility of the operators.     

Poly(sodium acrylamidoalkanoates) in water treatment

Poly(sodium 6-acrylamidocaproate), poly(sodium 11-acrylamidoundecanoate), poly(sodium 11-N-methylacrylamidoundecanoate) and poly(sodium 11-N-ethylacrylamidoundecanoate) have been synthesized. The performance of these anionic polyelectrolytes as coagulant aids in water treatment was assessed by the jar test. The effects of polymer dosage and pH on their performances were investigated in order to establish the optimum flocculation conditions. The effectiveness of these polyelectrolytes as well as a commercially available cationic polyamine organic coagulant aid was compared in terms of floc size, settling rate and the quality of treated water. Poly(sodium 6-acrylamidocaproate) and poly(sodium 11-acrylamidoundecanoate) were superior to poly(sodium 11-N-methylacrylamidoundecanoate) and poly(sodium 11-N-ethylacrylamidoundecanoate), and they are as effective as the commercial cationic coagulant aid.     

Thermal performance of ice-making machine with a multi-channel evaporator

An experimental investigation is presented in this paper on the vapor compression refrigeration cycle used in an ice-making machine with a multi-channel evaporator. To study the operation performance of the refrigeration system in the ice-making machine, the fluid temperature distribution in multi-channel evaporating coils are tested and the dynamic variations in each cooling loop are investigated during the ice-generating phase. The results show that the external cooling loops have the largest temperature fluctuations caused by the large initial refrigerant injecting mass flow and the external environmental disturbances. For the inner cooling loops, the related temperature profiles of different test points have relative stable variations. To reduce the temperature fluctuations of the outside loops, it is suggested to reduce the initial refrigerant mass flow and adjust the initial opening of the thermal expansion valve. Moreover, it is the normal phenomenon for the slight temperature variations for the temperature curves of different test points, caused by the adjustment of thermal expansion valve. During the ice-making process, both the sensible heat removal phase and latent heat removal phase are experienced successively. To remove the sensible heat of water, the refrigerant system is operating in high efficiency with test points having a rapid linear temperature reduction. While for eliminating the latent heat of ice, it requires much more power supply, the relating test points have a temperature decrease with fluctuations. To improve the operation performance of ice machine, some suggestions and improvements are proposed.     

Effects of Al doping on the structure and properties of goethite and its adsorption behavior towards phosphate

Al substitution in goethite is common in soils, and has strong influence on the structure and physicochemical properties of goethite. In this research, a series of Al-doped goethites were synthesized, and characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The adsorption behavior of these samples towards PO₄^3 − was also investigated. Characterization results demonstrated that increasing Al content in goethite led to a reduction in crystallinity, increase in specific surface area (SSA), and morphology change from needle-like to granular. Rietveld structure refinement revealed that the lattice parameter a remained almost constant and b slightly decreased, but c was significantly reduced, and the calculated crystal density increased. EXAFS analysis demonstrated that the Fe(Al)–O distance in the structure of the doped goethites was almost the same, but the Fe–Fe(Al) distance decreased with increasing Al content. Surface analysis showed that, with increasing Al content, the content of OH groups on the mineral surface increased. The adsorption of phosphate per unit mass of Al-doped goethite increased, while adsorption per unit area decreased owing to the decrease of the relative proportion of (110) facets in the total surface area of the minerals. The results of this research facilitate better understanding of the effect of Al substitution on the structure and properties of goethite and the cycling of phosphate in the environment.     

聚驱油田采出液处理生成油泥的组成及形成机理

采用红外光谱、光电子能谱、扫描电子显微镜等方法对聚合物驱油(聚驱)油田采出液处理过程中生成的两种物理性质存在明显差异的油泥(黏弹油泥和非黏弹油泥)进行组成分析及生成机理分析。实验结果表明:黏弹油泥的FTIR谱图、XPS谱图与实验室模拟生成的黏弹油泥对照样的谱图高度相似,证明黏弹油泥是聚季铵盐型清水剂与阴离子聚丙烯酰胺生成的高含油阴阳离子复合物;非黏弹油泥不含季铵盐成分,而含有酰胺和醚官能团,推测有可能来源于采出液处理剂中的聚醚成分。     

活性炭催化臭氧氧化水中诺氟沙星

以椰壳基活性炭为催化剂,采用催化臭氧氧化工艺降解诺氟沙星(NF),优化了工艺条件,评价了催化活性,并对反应机理进行了探讨。实验结果表明:活性炭催化臭氧氧化工艺的优化条件为臭氧通量80 mg/h、初始NF质量浓度15.0 mg/L、反应温度25℃、初始NF溶液p H 5.0;在该优化条件下反应60 min时,TOC去除率达51.5%,较单独臭氧氧化的32.5%和单独活性炭吸附的11.5%有明显改善;在活性炭催化臭氧氧化工艺中臭氧氧化与活性炭吸附之间存在一定的协同作用,活性炭具有较好的催化活性;活性炭催化臭氧氧化工艺对NF的去除主要是基于臭氧的直接氧化作用。     

长沙市大气中总挥发性有机物分布特征、变化规律及污染对策研究

为调查长沙市大气中TVOC的分布特征及变化规律,研究其污染控制措施,按照相关标准和技术规范,在不同的功能区划和行政区划内合理布设12个监测点位,分季节采集样品,使用热脱附－气相色谱法进行检测,利用反距离权重插值和遥感解译等方法进行综合分析。结果表明：长沙市大气中苯与甲苯（ B／T）特征比值为0．58,汽车尾气是长沙市苯系物和TVOC的主要来源;长沙市不同的工业区TVOC浓度有显著差异,工业区合理布局,增加绿化面积,可以有效的降低TVOC浓度。     

污染源在线监控数据异常智能检测方法研究

污染源自动监测数据中存在大量异常数据,严重影响数据整体质量。建立科学可靠的自动监测数据诊断分析处理方法,可有效提升在线监控监管能力水平,为数据的深度应用提供支持。但目前尚缺乏对该方法的深入研究。因此,综述了数据挖掘领域主流异常数据检测方法,并总结了在电力、交通、金融、航天等领域的应用情况,指出存在的不足和发展方向,旨在为智能污染源自动监控数据异常检测提供指导,促进污染源自动监控系统发展。