城市总体规划的战略环境评价研究 --以河北省丰南市黄各庄镇为例

开展城市总体规划的战略环境评价可以将环境问题纳入到规划中进行综合分析，使规划遵循可持续发展的原则，并根据可持续发展的目标，协调各部门发展的关系。本文基于开发的评价程序，结合黄各庄镇总体规划的战略环境评价。尝试在规划层次上对城镇总体规划的战略环境评价进行探讨。     

全过程管理视角的上海市垃圾分类回顾与展望

为掌握分类投放全面推广对城市生活垃圾全过程管理的影响,系统回顾了上海生活垃圾分类的推行历程,从生命周期角度预测了不同分类水平下上海生活垃圾处理与处置的环境效应。上海垃圾分类经历了试点、推广、调整、强制推广4个阶段,指导思路从资源化主导转变为"减量化、资源化、无害化"并行,减量效果从调整阶段开始逐渐显现,其他垃圾热值提高。在模拟的8种场景中,当湿垃圾、可回收物、其他垃圾混合投放并处置时,总环境影响潜值最高,达到1.22×10-13 PET₂₀₀₀/t;湿垃圾、可回收物、其他垃圾分出量占比分别为30%、20%和50%时(上海市生活垃圾厌氧消化、焚烧和回收的最大处理能力分别占总处理能力的25%、60%和15%),可实现原生垃圾零填埋,并获得最佳环境效益,环境影响潜值降为8.13×10-14 PET₂₀₀₀/t。从生活垃圾全过程管理角度看,分类投放是前提条件,配套适当的处理处置设施才能更好地显现环境效益优势。     

Characteristics of ambient volatile organic compounds during spring O3 pollution episode in Chengdu, China

Surface ozone (O₃) has become a critical pollutant impeding air quality improvement in many Chinese megacities. Chengdu is a megacity located in Sichuan Basin in southwest China, where O₃ pollution occurs frequently in both spring and summer. In order to understand the elevated O₃ during spring in Chengdu, we conducted sampling campaign at three sites during O₃ pollution episodes in April. Volatile organic compounds (VOCs) compositions at each site were similar, and oxygenated VOCs (OVOCs) concentrations accounted for the highest proportion (35%-45%), followed by alkanes, alkens (including acetylene), halohydrocarbons, and aromatics. The sensitivity of O₃ to its precursors was analyzed using an observation based box model. The relative incremental reactivity of OVOCs was larger than other precursors, suggesting that they also played the dominant role in O₃ formation. Furthermore, the positive matrix factorization model was used to identify the dominant emission sources and to evaluate their contribution to VOCs in the city. The main sources of VOCs in spring were from combustion (27.75%), industrial manufacturing (24.17%), vehicle exhaust (20.35%), and solvent utilization (18.35%). Discussions on VOCs and NO_x reduction schemes suggested that Chengdu was typical in the VOC-limited regime, and VOC emission reduction would help to prevent and control O₃. The analysis of emission reduction scenarios based on VOCs sources showed that the emission reduction ratio of VOCs to NO₂ needs to reach more than 3 in order to achieve O₃ prevention. Emission reduction from vehicular exhaust source and solvent utilization source may be more effective.     

Carbon and polymer-based magnetic nanocomposites for oil-spill remediation—a comprehensive review

Environmental Science and Pollution Research - Oil spills are a major contributor to water contamination, which sets off a significant impact on the environment, biodiversity, and economy....     

The impact of Bt maize expressing the Cry1Ac protein on non-target arthropods

Environmental Science and Pollution Research - From 2014 to 2016, individuals of the principal non-target arthropod (NTA) species in a field of Bt maize expressing the Cry1Ac protein (Bt38) were...     

Investigating adsorption performance of heavy metals onto humic acid from sludge using Fourier-transform infrared combined with two-dimensional correlation spectroscopy

Environmental Science and Pollution Research - Efforts to improve sludge resource utilization have become increasingly important. In this study, humic acid (HA) was extracted from sludge samples...     

Reduced graphene oxide modified Z-scheme AgI/Bi2MoO6 heterojunctions with boosted photocatalytic activity for water treatment originated from the efficient charge pairs partition and migration

Environmental Science and Pollution Research - In order to enhance degradation of harmful organic pollutants like Rhodamine B (RhB) dye under visible-light irradiation (λ >420 nm), a...     

Research on distribution performance of desert sand for heat storage in downcomer

In this research, desert sand is used as the sensible heat storage medium, which exchanges heat with air in the downcomer to realize heat storage and heat release. The desert sand distribution uniformity has a significant impact on the heat exchange performance and efficiency between desert sand and air for the process of convection in the downcomer. Given the superiority of sensible heat storage in convective heat transfer between desert sand and air, distributors with cylinder or conical bore solid particles and homogeneity performance testing device are designed and manufactured on the basis of convection system equipped with solid particle–air downcomer. Then, the convection experiment between solid sand and air is researched. The greater the desert sand flow rate and higher the volume density, the larger the variance of regional mass flow rate and the worse the homogeneity performance. For the cylinder bore distributor, the smaller the sand particle size is, the greater affected the sand groups can be. The sand homogeneity performance is preferable with the two particle size ranges: 0.18-0.25 mm and 0.15-0.18 mm. The total sand flow rate decreases, but the uniformity improves with the increase of the air flow velocity, and the best distribution performance is achieved at an air velocity of 0.6 m/s. However, the distribution performance declines with the air flow velocity persistently increasing because the sand groups are pushed to one pipe side close to the wall. The sand groups deflect seriously with the air flow velocity increasing.     

Enhanced styrene recovery from waste polystyrene pyrolysis using response surface methodology coupled with Box–Behnken design

A work applied response surface methodology coupled with Box–Behnken design (RSM-BBD) has been developed to enhance styrene recovery from waste polystyrene (WPS) through pyrolysis. The relationship between styrene yield and three selected operating parameters (i.e., temperature, heating rate, and carrier gas flow rate) was investigated. A second order polynomial equation was successfully built to describe the process and predict styrene yield under the study conditions. The factors identified as statistically significant to styrene production were: temperature, with a quadratic effect; heating rate, with a linear effect; carrier gas flow rate, with a quadratic effect; interaction between temperature and carrier gas flow rate; and interaction between heating rate and carrier gas flow rate. The optimum conditions for the current system were determined to be at a temperature range of 470–505 °C, a heating rate of 40 °C/min, and a carrier gas flow rate range of 115–140 mL/min. Under such conditions, 64.52% WPS was recovered as styrene, which was 12% more than the highest reported yield for reactors of similar size. It is concluded that RSM-BBD is an effective approach for yield optimization of styrene recovery from WPS pyrolysis.     

Magnetic nanocomposites for sustainable water purification—a comprehensive review

Numerous contaminants in huge amounts are discharged to the environment from various anthropogenic activities. Waterbodies are one of the major receivers of these contaminants. The contaminated water can pose serious threats to humans and animals, by distrubing the ecosystem. In treating the contaminated water, adsorption processes have attained significant maturity due to lower cost, easy operation and environmental friendliness. The adsorption process uses various adsorbent materials and some of emerging adsorbent materials include carbon- and polymer-based magnetic nanocomposites. These hybrid magnetic nanocomposites have attained extensive applications in water treatment technologies due to their magnetic properties as well as combination of unique characteristics of organic and inorganic elements. Carbon- and polymer-related magnetic nanocomposites are more adapted materials for the removal of various kinds of contaminants from waterbodies. These nanocomposites can be produced via different approaches such as filling, pulse-laser irradiation, ball milling, and electro-spinning. This comprehensive review is compiled by reviewing published work of last the latest recent 3 years. The review article extensively focuses on different approaches for producing various carbon- and polymer-based magnetic nanocomposites, their merits and demerits and applications for sustainable water purification. More specifically, use of carbon- and polymer-based magnetic nanocomposites for removal of heavy metal ions and dyes is discussed in detail, critically analyzed and compared with other technologies. In addition, commercial viability in terms of regeneration of adsorbents is also reviewed. Furthermore, the future challenges and prospects in employing magnetic nanocomposites for contaminant removal from various water sources are presented.