Testing and Commercialization of Byproduct Dibasic cids as Buffer Additives for Limestone Flue Gas esulfurization Systems

Pilot plant (0.1 MW) tests and utility boiler full scale demonstration (194 MW) of byproduct organic dibasic acids (DBA) as buffer additives to limestone scrubbers have shown performance improvements equivalent to those achieved by the addition of pure adipic acid. Both SO₂ removal efficiency and limestone utilization increased, and no significant operating problems were observed with three of the four DBA tested. Chemical and biological evaluations of scrubber samples taken during the DBA testing indicated no detectable tOxicity or mutagenicity, and no significant environmental impact is expected as a result of DBA addition. Economic estimates indicate that substitution of DBA for pure adipic acid as a buffer additive will result in additive cost savings of 30 % or greater.     

Comparison of Statistical Designs and Experimental Protocols Used to Evaluate Rain Acidity Effects on Field-Grown Soybeans

Published results of four field experiments testing effects of acidic precipitation in field-grown soybeans have led to contradictory conclusions. This paper examines the experimental procedures and protocols of the four experiments which could have contributed to differences in both the reported crop yields and the interpretations or conclusions drawn from the experiments.

The most important difference among the experiments is in their statistical designs. Two of the field layouts used only one plot per treatment, providing replication only for plants, rows or sectors within plots, but not among plots. By using real data from a highly replicated experiment it is shown that with such deficient statistical designs treatment effects cannot be separated from other microenvironmental variables peculiar to a specific plot location.

The other two experiments were highly replicated. They were designed to detect differences of approximately 10% among treatment means. Type 1 error, a, was predetermined, and replication was sufficient to keep type 2 error low. This design was made possible because a preliminary experiment was available to estimate the expected components of variance. Despite differences in the procedures and protocols among the four experiments, it is primarily the quality of the experimental design which has determined their validity and relative utility for crop loss assessment.     

The Relationship between Cross-Sectional and Time Series Studies

Abstract

There is a dearth of information on dust emissions from sources that are unique to the U.S. Department of Defense testing and training activities. However, accurate emissions factors are needed for these sources so that military installations can prepare accurate particulate matter (PM) emission inventories. One such source, coarse and fine PM (PM₁₀ and PM_2.5) emissions from artillery backblast testing on improved gun positions, was characterized at the Yuma Proving Ground near Yuma, AZ, in October 2005. Fugitive emissions are created by the shockwave from artillery pieces, which ejects dust from the surface on which the artillery is resting. Other contributions of PM can be attributed to the combustion of the propellants. For a 155–mm howitzer firing a range of propellant charges or zones, amounts of emitted PM₁₀ ranged from ～19 g of PM₁₀ per firing event for a zone 1 charge to 92 g of PM₁₀ per firing event for a zone 5. The corresponding rates for PM_2.5 were ～9 g of PM_2.5 and 49 g of PM_2.5 per firing. The average measured emission rates for PM₁₀ and PM_2.5 appear to scale with the zone charge value. The measurements show that the estimated annual contributions of PM₁₀ (52.2 t) and PM_2.5 (28.5 t) from artillery backblast are insignificant in the context of the 2002 U.S. Environment Protection Agency (EPA) PM emission inventory. Using national–level activity data for artillery fire, the most conservative estimate is that backblast would contribute the equivalent of 5 x 10^–4% and 1.6 x 10^–3% of the annual total PM₁₀ and PM_2.5 fugitive dust contributions, respectively, based on 2002 EPA inventory data.     

Water Content of Collected Aerosols in the South Coast and Southeast Desert Air Basins

Pollution prevention/waste minimization is a win-win-win situation for government, industry, and the public, which offers more than just protection of the environment for all. Industry gains from reduced capital and operating costs, reduced liabilities, cleaner and safer working conditions, conservation of energy and material resources, and the opportunity for government and industry to work together in a cooperative manner. However, a number of regulatory barriers exist which discourage pollution prevention/waste minimization. This paper provides examples from the aluminum, chemical, petroleum, and wood treating industries of how these regulatory barriers become disincentives. To promote pollution prevention/waste minimization, Congress and the U.S. EPA need to reexamine those RCRA provisions which support a command and control strategy that creates the barriers. The barriers include the distinction between value and valueless materials, offsite storage requirements prior to reuse/recycle, the “Derived from Rule”, the “Burning for Fuel Rule”, land ban technology standards, and RD&;D restrictions. A new RCRA Pollution Prevention/Waste Minimization subtitle is proposed to eliminate or minimize these barriers.     

A Collaborative Effort to Model Plant Response to Acidic Rain

Radish plants were exposed three times per week to simulated acidic rain at pH values of 2.6 to 5.4 over the course of four weeks in trials performed at Argonne, Illinois; Ithaca and Upton, New York; Corvallis, Oregon; Oak Ridge, Tennessee; and Toronto, Canada. Uniform genotype, soil media and planting techniques, treatment procedures, biological measurements, and experimental design were employed. Growth of plants differed among trials as a result of variation in greenhouse environmental conditions according to location and facilities. Larger plants underwent greater absolute but lower relative reductions in biomass after exposure to the higher levels of acidity. A generalized Mitscherlich function was used to model the effects of acidity of simulated rain or dry mass of hypocotyls using data from three laboratories that performed duplicate trials. The remaining data, from three other laboratories that performed only one trial each, were used to test the model. When the laboratory by trial effect was removed (influence of different growth. conditions), lack of fit to the Mitscherlich function was insignificant. Thus, a single mathematical model satisfactorily characterized the relationship between acidity and mean plant response. The pH value associated with a 10 percent reduction in mass was 3.3 ± 0.3 for hypocotyls. No value was estimated for shoots because effects oh shoots were not significant. The results of this study demonstrate that a generalized exposure-response model can be developed in the presence of large variations in environmental conditions when plant culture and exposure to simulated rain are standardized among laboratories.     

1987 Joint EPRI/EPA Symposium on Stationary Combustion NOX Control

From March 23rd to 26th, 1987, the city of New Orleans hosted 350 attendees, including representatives from 15 foreign countries, at the 1987 Joint Symposium on Stationary Combustion NO_x Control. Cosponsored by the Electric Power Research Institute (EPRI) and the U.S. Environmental Protection Agency (EPA), the symposium provided attendees the opportunity to hear 49 papers in nine sessions covering technological and regulatory developments on NO_x control in the United States and abroad since the May 1985 symposium in Boston. Session topics included general environmental issues, low-NO_x combustion equipment (i.e., low-NO_x burners, reburning, etc.), flue gas treatment, fundamental combustion research, and special issues for cyclone coal-fueled boilers, oil- and gas-fired boilers, and industrial combustion applications.

Advances to the state-of-the-art presented at this symposium include: improved and/or newly applied combustion modifications for pulverized coal-fired boilers; further analyses of reburning, the leading combustion modification option for cyclone-equipped boilers; initial experiences with catalytic flue gas treatment in Europe; studies of NO_x control retrofit options for oil- and gas-fired utility systems; and new technology developments for coal, oil, and gas fueled utility and industrial combustors.

This paper summarizes those presentations that discussed significant changes since May 1985 in areas of potential interest to EPRI and its utility members. Where appropriate, they include our perspectives on the applicability of these newly disclosed findings to utility systems.     

Acid Particles and the Tracheobronchial Region of the Respiratory System—An “Irritation-Signaling” Model for Possible Health Effects

This paper explores some detailed mechanistic hypotheses for the possible action of acid particles on the tracheobronchial region of the human respiratory system. Because of the buffering capacity and volume of mucus produced per day it appears doubtful that ordinary ambient exposures to acid particles could markedly change the overall pH of tracheobronchial mucus considered as a whole. However it is possible that individual acidic particles could contain enough acid to deliver localized “irritant signals” that could be the triggers for enhanced mucus secretion and cell division in sensitive portions of the bronchial tree, and thereby contribute to the processes involved in chronic bronchitis.

Depending on the exact pH depression required for a “signal” to be perceived by the tracheobronchial epithelium, the acid content of the incoming particles per unit weight, and the effect of neutralization by ammonia in the upper respiratory tract, the minimum size of an acidic particle required to deliver a perceptible signal might range from about 0.4 to 0.7 microns for portions of the epithelium that are frequently swept by 4-micron mucus droplets. (For unprotected epithelium, however, it is conceivable that the minimum effective size for acid particles could be less.) Since particle number per unit weight declines dramatically with increasing particle size, the most potent fraction of particles in terms of signals delivered per μg/m³is likely to be just above the minimum size that is needed to produce an effective signal. The model developed here makes predictions of the relative potency of particles of different size and acid delivery capacity that could be tested in both experimental animal systems and human epidemiological studies.     

Significance of Regional Source Contributions to Urban PM-10 Concentrations

Based on data collected in St. Louis, Philadelphia and other eastern U.S. cities, we conclude that a significant fraction of the PM-10 concentration is "background." In these urban areas the background fraction ranges from 35 to 80 percent of the daily, monthly or annual concentration. The bulk of the background appears to be of regional origin. The average chemical makeup of eastern U.S. PM-10 is sulfate as SO₄, 21-34 percent; crustal material, 14-39 percent; "unknown" (carbonaceous matter, ammonium, nitrate and water), 36-51 percent, all of which is difficult to apportion to specific sources. Dispersion modeling using a local source inventory can account only for a small portion of the total PM-10 mass. Emission roll-back of local sources may have a limited effect on reducing total concentrations of PM-10.