遂宁市主城区环境空气质量现状及原因分析研究

利用遂宁市2017年1月份4个国控环境空气自动监测数据,分析了遂宁市主城区环境空气质量现状,与整个成渝地区和周边城市的空气质量进行了横向比较,并阐述了遂宁市空气质量变化的原因.结果发现遂宁市主城区2017年1月份空气质量指数的范围为32～203,优良率为54.8％,首要污染物为PM2.5,空气质量同比下降了22.8％,环比下降了26.1％,但均显著优于成渝地区和周边城市的平均水平,并从4个方面阐述了空气质量下降的原因.最后,根据遂宁市大气污染现状,提出了4条针对性的防治措施.     

Use of ATP Readings to Predict a Successful Hygiene Intervention in the Workplace to Reduce the Spread of Viruses on Fomites

The purpose of this study was to validate the use of adenosine triphosphate (ATP) for evaluating hygiene intervention effectiveness in reducing viral dissemination in an office environment. The bacterial virus MS-2 was used to evaluate two scenarios, one where the hand of an individual was contaminated and another where a fomite was contaminated. MS-2 was selected as a model because its shape and size are similar to many human pathogenic viruses. Two separate experiments were conducted, one in which the entrance door push plate was inoculated and the other in which the hand of one selected employee was inoculated. In both scenarios, 54 selected surfaces in the office were tested to assess the dissemination of the virus within the office. Associated surface contamination was also measured employing an ATP meter. More than half of the tested hands and surfaces in the office were contaminated with MS-2 within 4 h. Next, an intervention was conducted, and each scenario was repeated. Half of the participating employees were provided hand sanitizer, facial tissues, and disinfecting wipes, and were instructed in their use. A significant (p < 0.05) reduction was observed in the number of surfaces contaminated with virus. This reduction in viral spread was evident from the results of both viral culture and the surface ATP measurements, although there was no direct correlation between ATP measurements with respect to viral concentration. Although ATP does not measure viruses, these results demonstrate that ATP measurements could be useful for evaluating the effectiveness of hygiene interventions aimed at preventing viral spread in the workplace.     

土壤镉污染的现状及修复研究进展

镉是一种对人类和动物健康危害严重的重金属。土壤镉污染问题已经成为全球研究热点。重点分析了镉污染土壤中镉的来源,镉对动植物、人体的危害,并提出了对镉污染土壤的修复的方法。     

Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Supercritical water oxidation of polyvinyl alcohol and desizing wastewater：Influence of NaOH on the organic decomposition

Polyvinyl alcohol is a refractory compound widely used in industry. Here we report supercritical water oxidation of polyvinyl alcohol solution and desizing wastewater with and without sodium hydroxide addition. However, it is difficult to implement complete degradation of organics even though polyvinyl alcohol can readily crack under supercritical water treatment. Sodium hydroxide had a significant catalytic effect during the supercritical water oxidation of polyvinyl alcohol. It appears that the OH ion participated in the C-C bond cleavage of polyvinyl alcohol molecules, the CO2-capture reaction and the neutralization of intermediate organic acids, promoting the overall reactions moving in the forward direction. Acetaldehyde was a typical intermediate product during reaction. For supercritical water oxidation of desizing wastewater, a high destruction rate (98.25%) based on total organic carbon was achieved. In addition, cases where initial wastewater was alkaline were favorable for supercritical water oxidation treatment, but salt precipitation and blockage issues arising during the process need to be taken into account seriously.     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

杭州市环境保护背景下的工业产业发展研究

通过对杭州市工业产业发展现状的调研,分析杭州市工业产业发展与环境保护之间存在的问题,制定产业发展的环境约束指标,引导发展符合资源节约型、环境友好型的产业,在保持经济高度增长的同时降低污染物排放,最终形成节约资源和保护环境的产业结构.杭州市在今后一段时期内,需进一步明确各区域产业发展重点,利用总量减排倒逼产业结构调整和优化升级,积极推进行业发展环境准入,区域建设项目环境准入,最终实现经济效益与生态效益的有机统一.     

城市排水系统沉积物特性研究

重点阐述了沉积物的来源和组成,沉积物的颗粒粒径、有机物含量(VSS/SS)、颗粒粘性和颗粒密度等物化性质,以及附着于沉积物上的金属污染物的相关特征。其粒度分布范围是D10为1.89～223.21μm,D50为12.38～437.30μm,D90为39.06～1 572.52μm;VSS/SS的范围是1%～38%;密度范围是1.80～2.47 g/cm3。金属污染物主要的附着对象是沉积物中的细小颗粒如生物膜上。以上沉积物性质对于解决排水系统的泥沙淤积问题以及水体污染的控制都具有重要意义。     

丁二烯缓冲罐自聚物的生成原因及防范措施

分析了ABS树脂生产装置丁二烯缓冲罐中丁二烯自聚物的生成原因,提出了预防措施,避免丁二烯自聚物的生成,保证装置的安全平稳运行。     

浙江省排污权有偿使用和交易政策法规研究

随着中国经济的高速发展和城市化进程的加快,环境资源的消耗进一步加大,环境资源面临枯竭问题已经严重影响到社会经济的可持续发展。建立排污权有偿使用与交易制度对于解决过高的环境治理成本问题具有重要作用。本文从排污权的基本法律理论入手,总结和分析我省排污权有偿使用和交易政策法规存在的问题,进而提出适合我省的政策建议,以期完善我省排污权有偿使用和交易的政策法规体系。