Nanoparticles in wastewater from a science-based industrial park - coagulation using polyaluminum chloride

The Hsinchu Science-based Industrial Park (HSIP) is the hi-tech manufacturing hub of Taiwan. Wastewater from the HSIP contains numerous nano-sized silicate particles whose size distributions peak at 2 and 90 nm. A 3-5 mg l(-1) as Al dose of polyaluminum chloride (PACl) was used in the field to coagulate these particles, but the removal efficiency was low. Laboratory scale tests indicated that although PACl coagulation removed 52% of the turbidity and 48% of the chemical oxygen demand (COD) from water, its effect on nano-particle removal was minimal. About 58% of the soluble COD was associated with colloidal Si particles. A light scattering test and transmission electron microscopy (TEM) demonstrated that the nano-particles agglomerated in approximately linear aggregates of sizes 100-300 nm. Prolonged contact between residual PACl and the nano-particles generated large aggregates with sizes of up to 10 microm and a fractal dimension of 2.24-2.63. The results presented herein should be of interest in the processing of "high-tech" wastewater that contains nanosized silica particles.     

Extracellular polymeric substance induces biogenesis of vivianite under inorganic phosphate-free conditions

Vivianite is often found in reducing environments rich in iron and phosphorus from organic debris degradation or phosphorus mineral dissolution. The formation of vivianite is essential to the geochemical cycling of phosphorus and iron elements in natural environments. In this study, extracellular polymeric substances (EPS) were selected as the source of phosphorus. Microcosm experiments were conducted to test the evolution of mineralogy during the reduction of polyferric sulfate flocs (PFS) by Shewanella oneidensis MR-1 (S. oneidensis MR-1) at EPS concentrations of 0, 0.03, and 0.3 g/L. Vivianite was found to be the secondary mineral in EPS treatment when there was no phosphate in the media. The EPS DNA served as the phosphorus source and DNA-supplied phosphate could induce the formation of vivianite. EPS impedes PFS aggregation, contains redox proteins and stores electron shuttle, and thus greatly promotes the formation of minerals and enhances the reduction of Fe(III). At EPS concentration of 0, 0.03, and 0.3 g/L, the produced HCl-extractable Fe(II) was 107.9, 111.0, and 115.2 mg/L, respectively. However, when the microcosms remained unstirred, vivianite can be formed without the addition of EPS. In unstirred systems, the EPS secreted by S. oneidensis MR-1 could agglomerate at some areas, resulting in the formation of vivianite in the proximity of microbial cells. It was found that vivianite can be generated biogenetically by S. oneidensis MR-1 strain and EPS may play a key role in iron reduction and concentrating phosphorus in the oligotrophic ecosystems where quiescent conditions prevail.     

A Recourse‐Based Interval Fuzzy Programming Model for Point‐Nonpoint Source Effluent Trading under Uncertainty

In this study, a recourse‐based interval fuzzy programming (RIFP) model is developed for tackling uncertainties expressed as fuzzy, interval, and/or probabilistic forms in an effluent trading program. It can incorporate preregulated water‐pollution control policies directly into its optimization process, such that an effective linkage between environmental regulations and economic implications (i.e., penalties) caused by improper policies due to uncertainty existence can be provided. The RIFP model is applied to point‐nonpoint source effluent trading of the Xiangxi River in China. The efficiency of trading efforts between water quality improvement and net system benefit under different degrees of satisfying discharge limits is analyzed. The results are able to help support (1) formulation of water‐pollution control strategies under various economic objectives and system‐reliability constraints, (2) selection of the desired effluent trading pattern for point and nonpoint sources, and (3) generation of tradeoffs among system benefit, satisfaction degree, and pollutant mitigation under multiple uncertainties. Compared with the traditional regulatory approaches, the results demonstrate that the water‐pollution control program can be performed more cost‐effectively through trading than nontrading.     

Evaluation of efficiency of aircraft liquid waste treatment and identification of daily inspection indices: a case study in Changchun, China

Evaluation of the efficiency of aircraft liquid waste treatment has previously been conducted to prevent pollution of the environment. The current study aimed to provide a set of practical methods for efficient airport sanitary supervision. Aircraft liquid waste was collected at Longjia International Airport, Changchun from multiple flights. The efficiency of liquid waste treatment as well as the water quality of the wastewater processed via a second-stage wastewater facility were examined by measuring a number of physical, chemical, and biological indices. Our results indicated that treatment solely via resolvable sanitizing liquid was not sufficient. Although the contents of first-class pollutants all met the requirements of the standard criteria, the contents of a number of second-class pollutants did not satisfy these criteria. However, after further treatment via a second-stage wastewater facility installed at the airport, all indices reached second-grade requirements of the discharge standard. We suggest that daily inspection and quarantine indices at airports should include the suspension content, biological oxygen demands after 5 days, chemical oxygen demand total organic carbon content, amino nitrogen content, total phosphorous content, and the level of fecal coliforms.     

Effect of external potassium (K) supply on the uptake of 137Cs by spring wheat (Triticum aestivum cv. Tonic): a large-scale hydroponic study.

A large-scale hydroponic experiment was carried out in a non-controlled greenhouse. Spring wheat plants were grown to maturity at four levels of external K concentration (2, 4, 20 and 40 mgl(-1)) and one concentration of radiocaesium (8 Bqml(-1)). Concentrations of K and radiocaesium in the growth solution were closely monitored, and replenishments were made upon depletion. K effectively competed with radiocaesium in terms of root uptake. Activity concentrations of radiocaesium in plants differed significantly between the four K treatments; the activity concentration at the lowest external K concentration being 100 times higher than that at the highest K level. The relationship between radiocaesium uptake and external K level could be described by a negative power function; this showed that when the K level reached around 12 mgl(-1), further increases in the external K level resulted only in slight changes in its inhibitory effect. As a result of this inhibitory effect of potassium supply, concentrations of radiocaesium in plant tissues, grains in particular, were greatly reduced at high external K concentration. Mechanisms involved in Cs-K interaction in root uptake are also discussed.     

Innovative process routes for a high-quality concrete recycling

This study presents alternative methods for the processing of concrete waste. The mechanical stresses needed for the embrittlement of the mortar matrix and further selective crushing of concrete were generated by either electric impulses or microwaves heating. Tests were carried out on lab-made concrete samples representative of concrete waste from concrete mixer trucks and on concrete waste collected on a French demolition site. The results obtained so far show that both techniques can be used to weaken concrete samples and to enhance aggregate selective liberation (that is the production of cement paste-free aggregates) during crushing and grinding. Electric pulses treatment seems to appear more efficient, more robust and less energy consuming (1–3 kW h t^?1) than microwave treatment (10–40 kW h t^?1) but it can only be applied on samples in water leading to a major drawback for recycling aggregates or cement paste in the cement production process.     

Food decay and offensive odorants: A comparative analysis among three types of food

In this study, a list of offensive odorants including reduced sulfur, carbonyls, nitrogenous, and volatile organic compounds was measured by the indirect (instrumental) method during the decay processes of three food types (snipe egg, mackerel, and squid). The strengths of the odor release were also quantified in terms of dilution-to-threshold (D/T) ratio based on the air dilution sensory test. To collect odor samples for each food type, decaying experiments were conducted in 100 mL throwaway syringes for 1 month. The results showed that ammonia had the largest mean ranging from 385 ppm (fish) to 554 ppm (egg). However, most odorants generally fell in the range of 0.01–10 ppm, regardless of food type. The odor strengths measured with the suprathreshold method in terms of average D/T values increased on the order of 33,520 (egg), 202,330 (fish), and 766,330 (squid). These results were highly comparable to the patterns of odor indices derived by empirical conversion of odorant concentration data. The overall results of this study thus suggest that a unique pattern of odor release develops among different odorants as well as food type.