Fixation and partitioning of heavy metals in slag after incineration of sewage sludge

Fixation of heavy metals in the slag produced during incineration of sewage sludge will reduce emission of the metals to the atmosphere and make the incineration process more environmentally friendly. The effects of incineration conditions (incineration temperature 500-1100°C, furnace residence time 0-60min, mass fraction of water in the sludge 0-75%) on the fixation rates and species partitioning of Cd, Pb, Cr, Cu, Zn, Mn and Ni in slag were investigated. When the incineration temperature was increased from 500 to 1100°C, the fixation rate of Cd decreased from 87% to 49%, while the fixation rates of Cu and Mn were stable. The maximum fixation rates for Pb and Zn and for Ni and Cr were reached at 900 and 1100°C, respectively. The fixation rates of Cu, Ni, Cd, Cr and Zn decreased as the residence time increased. With a 20min residence time, the fixation rates of Pb and Mn were low. The maximum fixation rates of Ni, Mn, Zn, Cu and Cr were achieved when the mass fraction of water in the sludge was 55%. The fixation rate of Cd decreased as the water mass fraction increased, while the fixation rate of Pb increased. Partitioning analysis of the metals contained in the slag showed that increasing the incineration temperature and residence time promoted complete oxidation of the metals. This reduced the non-residual fractions of the metals, which would lower the bioavailability of the metals. The mass fraction of water in the sludge had little effect on the partitioning of the metals. Correlation analysis indicated that the fixation rates of heavy metals in the sludge and the forms of heavy metals in the incinerator slag could be controlled by optimization of the incineration conditions. These results show how the bioavailability of the metals can be reduced for environmentally friendly disposal of the incinerator slag.     

河南省节能环保产业发展对策研究

节能环保产业是跨行业、涵盖面宽的综合性产业,其产业关联度大,带动力强,是国家确定的战略性新兴产业。河南省是新兴工业大省和资源消费大省,经济发展与资源环境承载力之间的矛盾日益突出,发展节能环保产业势在必行。本文分析了河南省节能环保产业的发展现状和存在的突出问题,提出了发展河南省节能环保产业的重点领域和推进路径。     

遥感技术在基层环境监测单位的常见应用

卫星遥感成为环境监测的新手段,基层环保部门由于受技术装备、知识储备、资金的限制,只能开展部分工作。文章介绍了常见的数据源,基层单位可开展的常见工作及取得的工作经验。期望为广大环保基层单位在现有条件下开展遥感环境监测工作提供参考。     

顶空气相色谱法测定水中甲醛、乙醛和丙烯醛

建立了顶空气相色谱法同时测定水中甲醛、乙醛、丙烯醛的方法。目标化合物连续测定9次的相对标准偏差分别为0.01,1.89,3.54;检出限分别为0.03μg/L,5.68μg/L,10.3μg/L,实际水样加标回收率在98%~101%。方法简便,快速,灵敏度高,基体干扰小。适用于地表水、地下水和工业废水中甲醛、乙醛、丙烯醛的同时、快速测定。     

污泥堆肥项目中除臭技术的选择与设计

介绍了我国污泥堆肥(生物干化)项目臭气治理现状,指出除臭问题是制约污泥堆肥技术推广应用的关键。对比各种除臭技术,分析了污泥堆肥臭气成分和除臭机理,得出结论:化学生物组合除臭工艺与植物液除臭工艺相结合是适合污泥堆肥项目的选择。最后介绍了除臭系统设计选型的主要参数,指出在污泥处理工艺设计中考虑除臭系统可节省投资和运行成本。     

千层塔扦插繁殖研究

通过扦插试验,采用不同浓度水平的吲哚丁酸、萘乙酸、生根粉和吲哚丁酸＋萘乙酸等药剂处理千层塔插条,研究对插条的生根量、生根率、成活率等的影响和插条萌芽状况及扦插基质对插条生根的影响,为千层塔资源快速再生提供有效的繁殖途径。     

水库型饮用水水源保护区划分方法比较

通过对水库型饮用水水源保护区划分的数值模型法、类比经验法和GIS辅助方法进行分析比较,提出适用于不同类型水库的饮用水源保护区划分适用性方法体系,为科学合理地划分水库型饮用水水源保护区提供依据.     

工业园区氯碱项目环境风险预测评价——以新疆某城市工业园区氯碱项目为例

对工业园区引入的化工项目进行环境风险评价,是园区规划的重点工作之一。对氯碱生产项目潜在的环境风险环节进行识别和风险类型的确定,对发生泄漏性事故进行环境风险评价,预测了事故发生对环境的影响程度及范围。对事故发生后的风险提出防范和应急减缓措施,并对项目提出规划建议。     

新疆环境功能区划与相关区划的关系及衔接

环境功能区划与主体功能区规划、生态功能区划之间既有区别又有联系,同时省级环境功能区划与国家级、县(市)级环境功能区划之间还存在上下衔接的关系.生态功能区划是环境功能区划的基础;主体功能区规划是环境功能区划的上位规划;新疆环境功能区划是从环境功能的角度对主体功能区进行空间上的细化.科学认识省级环境功能区划与多个区划之间的关系,对明确省级环境功能区划的定位、类型划分以及管理要求的深度具有重要作用.     

污泥堆肥技术现状及应用中需注意的问题

阐述了堆肥技术背景与基本原理。通过对国内示范项目运行情况的研究分析,提出了堆肥处理处置中应注意的工艺选择、处理规模、通风除臭、自动化与可靠性、减量化与稳定化,以及重金属、POPs、经营风险等问题。分析了堆肥处理处置全过程的经济成本,得出了该技术的参考运行成本;给出了该技术的适用条件和发展趋势。