Growth inhibition in Japanese medaka (Oryzias latipes) fish exposed to tetrachloroethylene

A recent study in our laboratory has demonstrated that tetrachloroethylene (TCE) is acutely toxic to Japanese medaka (Oryzias latipes) larvae with a 96 hr-LC50 of 18 (17-19) mg/mL (Spencer et al., 2002). In the present study we hypothesize that TCE exposure induces a developmental effect in Japanese medaka. Growth and age specific sensitivity of Japanese medaka larvae were studied with four age groups (7, 14, 21 and 28 days old) to determine tetrachloroethylene effects on these parameters. The medaka larvae were exposed for 96 hours in a single concentration (10 mg/mL) of TCE. The toxic endpoints evaluated were larvae weight, length, water content and protein concentration. The study revealed that exposure of medaka larvae to this sub-acute concentration of TCE significantly reduced length and weight in the treated group. The difference in growth between control and treated groups was more obvious in age versus length, than in age versus weight. The dry weight-fresh weight ratio (dw/fw) was shown to be higher in the control group. Water content in TCE-treated medaka was higher than in the control group, and younger fry had more water content than older ones. A higher protein concentration was also observed in TCE-treated medaka compared to the control group. These results indicate that TCE has a profound effect on the growth and development of Japanese medaka larvae.     

Fisheries sustainability assessment and sensitivity analysis: an illustration

Using a modified Ecologically Sustainable Development (ESD) framework, this paper assesses progress towards sustainability over time with a case study of the demersal trawl fishery of Oman, which has been transformed and turned into the coastal fishery after the trawl ban. A multi-criteria decision analysis method is used for ranking the years and deciding on the best performing year under five alternative scenarios related to the core components involving humans and the environment. Under the environment component, the year 2001 stood out as the best across all scenarios. The combined results also echoed the same in four out of five scenarios. With reference to progress towards sustainability during the study period, no clear positive year-to-year trend was observed from the overall results. The analysis of the S2 scenario revealed that the closed fishing season during 1998–2001 yielded a positive spill-over effect on the local economy. The results from a comparative analysis indicated that the strengths (weaknesses) of the year 2001 were predominantly associated with the environment (human) component, and thereby, reflecting a comparatively higher conservation outcome in the year 2001. The findings from the comparative analysis would guide fishery managers in designing appropriate strategies for improving weaknesses of the preferred option and reducing the inter-scenario risk by combining positive features of the second-best option. The framework outlined in the present paper can be used to guide the sustainability assessment of other local fisheries (for instance, the lobster, abalone, and shrimp fisheries) including the recently developed coastal fishery.

     

Biodesulfurization of refractory sulfur compounds in petro-diesel by a novel hydrocarbon tolerable strain Paenibacillus glucanolyticus HN4

Environmental Science and Pollution Research - One of the main precursors of air pollution and acid rains is the presence of the recalcitrant thiophenic compounds, for example dibenzothiophene...     

Modeling of flow and contaminant transport in coupled stream-aquifer systems

This paper describes an integrated approach for modeling flow and contaminant transport in hydraulically connected stream-aquifer systems. The code, FTSTREAM, extended the capabilities of the ground-water model, FTWORK, to incorporate chemical fate and transport in streams. Flow in the stream network is modeled as an unsteady, spatially varying flow, while transport modeling is based on a one-dimensional advection-dispersion equation. In addition to sorption and decay during transport in ground water, the model incorporates volatilization, settling and decay during transport in surface water. The interaction between surface water and ground water is accommodated by a leakage term and is implemented in the model using an iterative Picard-type procedure to ensure mass conservation across the interface between the two systems. The modeling approach is used to simulate contaminant transport in the Mad River, Ohio, which is hydraulically connected to a buried valley aquifer of sand and gravel outwash. The river is a receiving stream in the upstream part of the modeled area. Downstream, heavy pumping from a municipal well field causes the river to become a loosing stream. Induced infiltration from the river is responsible for a considerable portion of the well yield. The flow and transport model, developed for this study, simulates coupling between flow in the aquifer and the river. Hypothetical sources of contamination are introduced at selected locations in the upstream portion of the aquifer. The model is then used to simulate the expected transport in both the aquifer and the stream. A series of simulations elucidates the role of the river in facilitating the transport of the hypothetical contaminants in ground water and surface water. Effect of sorption, retardation and volatilization on contaminant transport is also examined for the case of the volatile organic compounds.     

Adsorption kinetics and modeling of H2S by treated waste oil fly ash

Waste oil fly ash (OFA) collected from disposal of power generation plants was treated by physicochemical activation technique to improve the surface properties of OFA. This synthesized material was further used for potential hydrogen sulfide (H₂S) adsorption from synthetic natural gas. The raw OFA was basically modified with a mixture of acids (20% nitric acid [HNO₃] and 80% phosphoric acid [H₃PO₄]), and it was further treated with 2 M potassium hydroxide (KOH) to enhance the surface affinity as well as surface area of synthesized activated carbon. Correspondingly, it enhanced the adsorption of H₂S. Crystallinity, surface morphology, and pore volume distribution of prepared activated carbon were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses. Fourier transform infrared (FTIR) study was also performed to identify the functional groups during different synthesis stages of modified activated carbon. The Langmuir, Freundlich, Sips, and dual-site Langmuir (DSL) models were used to study the kinetic and breakthrough behavior of H₂S adsorption over alkali-modified activated carbon. Modeling results of isotherms indicated that OFA has dual sites with high and low affinity for H₂S adsorption. The Clark model, Thomas model, and Yoon-Nelson model were used to examine the effects of flow rate and inlet concentration on the adsorption of H₂S. Maximum uptake capacity of 8.5 mg/g was achieved at 100 ppm inlet concentration and flow rate of 0.2 L/min.

Implications: Utilization of worthless oil fly ash from power plant is important not only for cleaning the environment but also for solid waste minimization. This research scope is to eradicate one pollutant by using another pollutant (waste ash) as a raw material. Chemical functionalization of synthesized activated carbon from oil fly ash would lead to attachment of functional groups of basic nature to attract the acidic H₂S. Such type of treatment can enhance the uptake capacity of sorbent several times.     

Semi-closed synthesis of nitrogen and oxygen Co-doped mesoporous carbon for selective aqueous oxidation

Heteroatom-doped meso/micro-porous carbon materials are conventionally produced by harsh carbonization under an inert atmosphere involving specific precursors, hard/soft templates, and heteroatom-containing agents. Herein, we report a facile synthesis of N and O co-doped meso/micro-porous carbon (NOMC) by template-free carbonization of a small-molecule precursor in a semi-closed system. The semi-closed carbonizaiton process yields hydrophilic NOMCs with large surface area in a high yield. The porous structure as well as the elemental composition of NOMCs can be modulated by changing the holding time at a particular temperature. NOMCs as metal-free heterogeneous catalysts can selectively oxidize benzyl alcohol and its derivatives into aldehydes/ketones with>85％conversion in aqueous solution, which is much higher than that of the control sample obtained in tube furnace (21％conversion), mainly due to their high N content, high percentage of pyridinic N, and large surface area. The presence of O-containing moieties also helps to improve the hydrophilicity and dispersion ability of catalysts and thus facilitates the mass transfer process during aqueous oxidation. The NOMC catalysts also dispayed excellent activity for a wide range of substrates with a selectivity of>99％.     

Effect of gervital in attenuating hepatotoxicity caused by methotrexate or azathioprine in adult albino rats

Environmental Science and Pollution Research - Methotrexate (MTX) and azathioprine (AZA) are chemotherapeutic, antimetabolic, and immunosuppressive agents with substantial risks such as oxidative...     

Metal accumulation from contaminated food and its effect on growth of juvenile landsnails Helix engaddensis

Metal accumulation by juvenile landsnails, Helix engaddensis, and its effect on growth rate was studied over a 5-week period of exposure and 2 weeks of recovery. An artificial food contaminated with Cu (4-2500 microg x g(-1)), Cd (50-800 microg x g(-1)), Pb, and Zn (20-12500 microg x g(-1)) was used. During the 7 weeks of the experiment, mortality rates were 20, 27, 30, and 38% among snails fed Cu-, Pb-, Zn-, and Cd-contaminated food, respectively. According to the ability to inhibit growth, metals were found to have the following order: Cd > Zn > Cu = Pb. Inhibitory effects of dietary metals started to be significant from the third week of exposure on. Inhibition of growth by Pb and Cu was found to be reversible, and within the first week of recovery, snails erupted their aestivation and resumed feeding and growth to gain weights similar to those of the control groups. Snails fed Cd- or Zn-contaminated food failed to resume growth during the 2 weeks of recovery. This indicates that in the case of Cu and Pb, growth inhibition was mainly due to starvation due to food rejection and aestivation. On the other hand, growth inhibition caused by Cd and Zn may have been resulting from irreversible toxicity. Therefore, snails were assumed to be sensitive to Cd and Zn but tolerant to Cu and Pb. Accumulation of Cu and Pb was significant only at the highest concentrations. At low and medium concentrations, no signs of accumulation were observed, indicating regulation at these concentrations. Cd and Zn accumulation starts at low concentrations but became significant at medium and high levels indicating accumulation of these metals.     

Development and verification of a screening model for surface spreading of petroleum

Overflows and leakage from aboveground storage tanks and pipelines carrying crude oil and petroleum products occur frequently. The spilled hydrocarbons pose environmental threats by contaminating the surrounding soil and the underlying ground water. Predicting the fate and transport of these chemicals is required for environmental risk assessment and for remedial measure design. The present paper discusses the formulation and application of the Oil Surface Flow Screening Model (OILSFSM) for predicting the surface flow of oil by taking into account infiltration and evaporation. Surface flow is simulated using a semi-analytical model based on the lubrication theory approximation of viscous flow. Infiltration is simulated using a version of the Green and Ampt infiltration model, which is modified to account for oil properties. Evaporation of volatile compounds is simulated using a compositional model that accounts for the changes in the fraction of each compound in the spilled oil. The coupling between surface flow, infiltration and evaporation is achieved by incorporating the infiltration and evaporation fluxes into the global continuity equation of the spilled oil. The model was verified against numerical models for infiltration and analytical models for surface flow. The verification study demonstrates the applicability of the model.