Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Non-Conventional Construction Materials from Dredging Spoils

As a result of increasing environmental concerns on offshore dumping, dredging spoils arising from reclamation and harbour works will create another problem of disposal. The spoils are usually not suitable for use as landfill materials as they have little bearing capacities. The disposal problem could, however, be reduced if there is an alternative use for it. This paper describes a laboratory study on the use of dredging spoils together with limestone as raw materials for the production of cementitious building materials. Different compositions of the raw materials were ground and incinerated to produce cement. The cementitious material produced after incineration was also mixed with ordinary Portland cement for use as blended cement. The study shows that dredging spoils could be used to produce cement satisfying the strength requirements for masonry cement. When used as blended cement, it can replace up to 30% by weight of ordinary Portland cement without reducing the strength.     

Fungal laccase-catalyzed degradation of hydroxy polychlorinated biphenyls

Hydroxy polychlorinated biphenyls (hydroxy PCBs) are toxic metabolites of PCBs. Their toxicity such as strong endocrine disruption demands effective remediation methods. Laccases from Trametes versicolor and Pleurotus ostreatus were tested to degrade hydroxy PCBs. Optimum pHs for both enzymes were around 4.0. Laccase from T. versicolor degrades hydroxy PCBs more rapidly than that from P. ostreatus. The enzymatic activities remained little changes in up to 10% organic solvents, but decreased rapidly in more than 10% acetone, acetonitrile or DMSO. Degradation rate constants decreased with increase of chlorination and no degradation was observed with tetra-, penta- and hexa-chloro hydroxy PCBs in non-mediated reactions. However, the tetra- to hexa-chloro hydroxy PCBs were degraded by laccase from T. versicolor in the presence of the mediator 2,2,6,6-tetramethylpiperidine-N-oxy radical. The other mediators, 4-ethyl-2-methoxyphenol, 2,2'-azino-bis(3-ethylbenzthiazoline sulfonic acid) diammonium salt and 1-hydroxybenzotriazole and humic acid, also enhanced degradation of all the hydroxy PCBs except 4-hydroxy-2',3,3',4',5,5'-hexachlorobiphenyl. The results showed that 3-hydroxy biphenyl was more resistant to laccase degradation than 2- or 4-hydroxy analogues. Significant linear-correlations (coefficient of determination, r2 = 0.9097 and 0.8186 for laccases from P. ostreatus and T. versicolor, respectively) were found between the ionization potentials and the removal rate constants of hydroxy PCBs.     

Differential pressure in membrane channel caused by foulant capture onto spacers.

Feed spacers in spiral-wound reverse osmosis membrane modules are highly susceptible to deposition or attachment of suspended particulates and organic matters in the feed stream. This type of fouling can cause a significant pressure drop along the membrane channel (differential pressure) without much effect on the average permeate flux. In practical applications, membrane cleaning is often triggered when the differential pressure in a membrane channel exceeds a threshold value. A mathematical model was developed to simulate the development of differential pressure in the feed channel resulting from foulant capture by the feed spacers. Simulations were carried out to investigate and demonstrate the effect of various parameters on differential pressures in the membrane channel. Differential pressures observed in a two-stage reverse osmosis water reclamation plant were simulated with the model, and the results showed that the model could adequately describe the increase of differential pressure with operating time in the reverse osmosis plant.     

Anaerobic digestion of polyelectrolyte flocculated waste activated sludge

This work examined how adding one of three polyelectrolyte flocculants (T3052: cationic, T2000: non-ionic, and T1052: anionic) affected the anaerobic digestion of wastewater sludge. Methane production, floc characteristics (morphology and zeta-potential) and process parameters (soluble chemical oxygen demands (SCODs) and reductive potentials) were monitored along the digestion tests. The digestion rates of T2000- and T1052-conditioned sludge resembled that for original sludge. The T3052-flocculated sludge generated methane at a higher rate during the first 6 days of digestion than did the original one. In the following stage, the digestion rate of sludge flocculated with T3052 at dosage exceeding 15 g/kg dried solids declined. For example, at 40 days of digestion the methane production amounts for original, 15 g/kg DS flocculated, and 40 g/kg flocculated sludge were of 136, 105, and 85 g/kg DS, respectively. The role of flocculants could change in different stages of digestion.The dosed polymers had no apparent toxicity to the inoculum used. The changes in SCOD, adenosintriphosphate concentrations, oxidative and reductive potential, and zeta-potentials did not correlate with the noted hindered digestion for T3052-conditioned sludge. Microphotographic observation revealed that the flocs of T3052-conditioned sludge were not only of a large size, but also were resistant to structural deterioration during digestion. Therefore, mass transfer resistance was proposed to account for the hindered digestion efficiency observed for T3052-conditioned sludge.     

A nanofilter composed of carbon nanotube-silver composites for virus removal and antibacterial activity improvement

We have developed a new nanofilter using a carbon nanotube-silver composite material that is capable of efficiently removing waterborne viruses and bacteria.The nanofilter was subjected to plasma surface treatment to enhance its flow rate,which was improved by approximately 62%.Nanoscale pores were obtained by fabricating a carbon nanotube network and using nanoparticle fixation technology for the removal of viruses.The pore size of the nanofilter was approximately 38 nm and the measured flow rate ranged from 21.0 to 97.2 L/(min·m~2)under a pressure of 1–6 kgf/cm~2 when the amount of loaded carbon nanotube-silver composite was 1.0 mg/cm~2.The nanofilter was tested against Polio-,Noro-,and Coxsackie viruses using a sensitive real-time polymerase chain reaction assay to detect the presence of viral particles within the outflow.No trace of viruses was found to flow through the nanofilter with carbon nanotube-silver composite loaded above 0.8 mg/cm~2.Moreover,the surface of the filter has antibacterial properties to prevent bacterial clogging due to the presence of 20-nm silver nanoparticles,which were synthesized on the carbon nanotube surface.     

Carbonaceous resin capsule for vapor-phase monitoring of volatile hydrocarbons in soil: partitioning and kinetic model verification

The resin capsule system (RCS) was tested as a means of providing data on the presence and forms of volatile hydrocarbons. Results indicated that resin capsules provided data showing sensitivity to soil variables (texture and moisture content) and time. The objectives of this paper are to evaluate the RCS methodology and to determine whether carbonaceous resin capsules provide results that can be described by fundamental chemical partitioning and kinetic principles. Findings revealed a significant relationship between quantities of benzene, toluene, ethylbenzene, and xylene adsorbed on the capsule and quantities partitioned into the vapor phase. Kinetic evaluation indicated that the vapor adsorption by the resin capsule is regulated by diffusion processes. No verification of rate-limiting processes was possible due to limitations imposed by the experimental design, but it appears that during early stages, adsorption rate was limited by vapor diffusion through the soil. The resin capsule data also reflected differences that would be expected due to properties of the organic liquids present. These results provide further evidence that the RCS could be developed to suggest direct in situ monitoring to reveal quantities and nature of organic substances in soils.     

Applying TRIZ principles in crowd management

Overcrowding that happens in places like concerts, stadiums or pilgrimage locations might sometimes cause injury or loss of life. Maintaining the safety of crowd in these places is therefore very important. In addition, increasing the performance of the buildings and structures has always been an important concern. Most of the previous work focused on using new devices and methods for monitoring and management of the crowd but they rarely focus on a comprehensive and structured approach with the purpose of increasing efficiency and safety. In this paper, we explore a Russian “Theory of Inventive Problem Solving”, TRIZ, to see whether its principles can help us to solve or improve overcrowding issues. More specifically we find the contradictions that arise in the context of crowd management and we observe which of the categorical solutions suggested by TRIZ might possibly be useful for our problem. Increasing the crowd capacity in a relatively small area, which leads to overcrowding, is one of the common contradictions in crowd management. TRIZ has been suggested as a good method for solving problems which involve contradiction and thus, chosen for this purpose.     

Effects of copper (I) oxide on growth and biochemical compositions of two marine microalgae

In copper based antifouling (AF) paints Cu (I) oxide was largely used as booster biocide. In this study effect of Cu (I) oxide on two marine microalgae, Tetraselmis suecica and Dunaliella tertiolecta was demonstrated. EC50 (96 hr) concentrations estimated for T. suecica and D. tertiolecta were 1.3 mg l(-1) and 1.34 mg l(-1), respectively. Copper (I) oxide induced changes in growth, chlorophyll, carbohydrate and protein contents were observed in T. suecica and D. tertiolecta. At low concentration of 0.0625 mg l(-1), 3-26% and 1-16% growth stimulation was observed in T. suecica and T. tertiolecta respectively. Increasing Cu (I) oxide concentrations proportionately decreased the carbohydrate and protein contents. This study clearly indicates the toxicity of excessive Cu (I) oxide on growth and biochemical compositions of T. suecica and D. tertiolecta.     

Assessment of heavy metals in aquatic sediments

The concentration of heavy metals in the bottom sediment and interstitial water collected from two reservoirs in Singapore was found to be enriched. A distribution coefficient,K _d , was used to assess the chemical stability of heavy metals in the sediments. Numerical models were used to assess (1) the redistribution of heavy metals in a changing environment, and (2) long-term self clean-up capabilities of a reservoir.