Evaluation of groundwater flow patterns around a dual-screened groundwater circulation well

Dual-screened groundwater circulation wells (GCWs) can be used to remove contaminant mass and to mix reagents in situ. GCWs are so named because they force water in a circular pattern between injection and extraction screens. The radial extent, flux and direction of the effective flow of this circulation cell are difficult to measure or predict. The objective of this study is to develop a robust protocol for assessing GCW performance. To accomplish this, groundwater flow patterns surrounding a GCW are assessed using a suite of tools and data, including: hydraulic head, in situ flow velocity, measured hydraulic conductivity data from core samples, chemical tracer tests, contaminant distribution data, and numerical flow and transport models. The hydraulic head data show patterns that are consistent with pumping on a dual-screened well, however, many of the observed changes are smaller than expected. In situ thermal perturbation flow sensors successfully measured horizontal flow, but vertical flow could not be determined with sufficient accuracy to be useful in mapping flow patterns. Two types of chemical tracer tests were utilized at the site and showed that much of the flow occurs within a few meters of the GCW. Flow patterns were also assessed based on changes in contaminant (trichloroethylene, TCE) concentrations over time. The TCE data clearly showed treated water moving away from the GCW at shallow and intermediate depths, but the circulation of that water back to the well, except very close to the well, was less clear. Detailed vertical and horizontal hydraulic conductivities were measured on 0.3 m-long sections from a continuous core from the GCW installation borehole. The measured vertical and horizontal hydraulic conductivity data were used to construct numerical flow and transport models, the results of which were compared to the head, velocity and concentration data. Taken together, the field data and modeling present a fairly consistent picture of flow and transport around the GCW. However, the time and expense associated with conducting all of those tests would be prohibitive for most sites. As a consequence, a sequential protocol for GCW characterization is presented here in which the number of tools used can be adjusted to meet the needs of individual sites. While not perfect, we believe that this approach represents the most efficient means for evaluating GCW performance.     

Characterization and identification of trends in average ambient ozone and fine particulate matter levels through trajectory cluster analysis in eastern Canada

In many locations in Eastern Canada, ambient levels of fine particulate matter (PM,25) and surface ozone (O3) depend on airflow direction and synoptic scale meteorological conditions. In this study, a cluster analysis was performed on 10 yr (1994-2003) of back-trajectory data for 11 locations in Eastern Canada, resulting in the identification of 10 unique back-trajectory clusters (or airflows) for each location. The airflows were then used to characterize and identify spatial and temporal trends in the daily maximum 8-hr average O3 (dmax 8-hr O3) and the daily average PM2.5 levels. Results showed that airflows from the southwest passing over Michigan and Southern Ontario were associated, on average, with the highest O3 levels at most locations in Eastern Canada. For PM2.5, the highest levels occurred with airflows from the Eastern Ohio River Valley. At major urban locations in Ontario and Quebec, the warm season mean (May to September) dmax 8-hr O3 and the annual mean PM2.5 were, on average, 12 parts per billion and 7.6 microg/m3 higher, respectively, than airflows from the north. Elevated levels of O3 and PM2.5 also occurred under light airflows, and, on average, the levels under light airflows were higher than their nonlight counterparts. At several locations in Canada, including Toronto, Montreal, Quebec City, and Kejimkujik, the annual warm season mean dmax 8-hr O3 experienced a statistically significant (95% confidence) increasing trend over the 10-yr period. When airflow direction was considered, a number of locations experienced statistically significant upward trends in O3 for airflow from the north and northwest. Several locations also showed significant upward trends associated with airflow from the southwest passing over Michigan and Southwestern Ontario. Although there are no statistically significant downward trends, airflows from the southwest have shown a reduction in O3 levels in Southwestern Ontario in more recent years.     

Improving soil investigations at brownfield sites using a flexible work strategy and screening methods inspired by the US Environmental Protection Agency's triad approach

Investigations of polluted brownfield sites and sample analyses are expensive, and the resulting data are often of poor quality. Efforts are needed, therefore, to improve the methods used in investigations of brownfield sites to both reduce costs and improve the quality of the results. One approach that could be useful for both of these purposes is the triad strategy, developed by the US Environmental Protection Agency, in which managing uncertainty is a central feature. In the investigations reported here, a field study was conducted to identify possible ways in which uncertainties could be managed in practice. One example considered involves optimizing the uncertainty by adjusting the sizes of samples and the efforts expended in analytical work according to the specific aims of the project. In addition, the potential utility of several toxicity assessment methods for screening sites was evaluated. As well as presenting the results of these assessments, in this contribution we discuss ways in which a flexible work strategy and screening methods inspired of the triad philosophy could be incorporated into the Swedish approach to remediate brownfield sites. A tiered approach taking advantage of field and screening methods is proposed to assess brownfield sites focusing on the response and acceptable uncertainty that are required for the task.     

A photochemical reactor for studies of atmospheric chemistry

A photochemical reactor for studies of atmospheric kinetics and spectroscopy has been built at the Copenhagen Center for Atmospheric Research. The reactor consists of a vacuum FTIR spectrometer coupled to a 100 L quartz cylinder by multipass optics mounted on electropolished stainless steel end flanges, surrounded by UV-A, UV-C and broadband sun lamps in a temperature-controlled housing. The combination of a quartz vessel and UV-C lamps allows higher concentrations of O(¹D) and OH than can be generated by similar chambers. The reactor is able to produce radical concentrations of ca. 8 × 10¹¹ cm^?3 for OH, 3 × 10⁶ cm^?3 for O(¹D), 3.3 × 10¹⁰ cm^?3 for O(³P) and 1.6 × 10¹² cm^?3 for Cl. The reactor can be operated at pressures from 10^?3 to 10³ mbar and temperatures from 240 to 330 K. As a test of the system we have studied the reaction CHCl₃ + Cl using the relative rate technique and find k_CHCl3+Cl/k_CH4+Cl = 1.03 ± 0.11, in good agreement with the accepted value.     

Microenvironmental characteristics important for personal exposures to aldehydes in Sacramento,CA, and Milwaukee,WI

Oxygenated additives in gasoline are designed to decrease the ozone-forming hydrocarbons and total air toxics, yet they can increase the emissions of aldehydes and thus increase human exposure to these toxic compounds. This paper describes a study conducted to characterize targeted aldehydes in microenvironments in Sacramento, CA, and Milwaukee, WI, and to improve our understanding of the impact of the urban environment on human exposure to air toxics. Data were obtained from microenvironmental concentration measurements, integrated, 24-h personal measurements, indoor and outdoor pollutant monitors at the participants' residences, from ambient pollutant monitors at fixed-site locations in each city, and from real-time diaries and questionnaires completed by the technicians and participants. As part of this study, a model to predict personal exposures based on individual time/activity data was developed for comparison to measured concentrations. Predicted concentrations were generally within 25% of the measured concentrations. The microenvironments that people encounter daily provide for widely varying exposures to aldehydes. The activities that occur in those microenvironments can modulate the aldehyde concentrations dramatically, especially for environments such as “indoor at home.” By considering personal activity, location (microenvironment), duration in the microenvironment, and a knowledge of the general concentrations of aldehydes in the various microenvironments, a simple model can do a reasonably good job of predicting the time-averaged personal exposures to aldehydes, even in the absence of monitoring data. Although concentrations of aldehydes measured indoors at the participants' homes tracked well with personal exposure, there were instances where personal exposures and indoor concentrations differed significantly. Key to the ability to predict exposure based on time/activity data is the quality and completeness of the microenvironmental characterizations for the chemicals of interest. Consistent with many earlier studies, personal exposures are difficult to predict using data from regional outdoor monitors.     

Development and validation of rapid assessment indices of condition for coastal tidal wetlands in southern New England, USA

Desertification, land degradation in arid, semi-arid, and dry sub-humid regions, is a global environmental problem. With respect to increasing importance of desertification and its complexity, the necessity of attention to the optimal de-desertification alternatives is essential. Therefore, this work presents an analytic hierarchy process (AHP) method to objectively select the optimal de-desertification alternatives based on the results of interviews with experts in Khezr Abad region, central Iran as the case study. This model was used in Yazd Khezr Abad region to evaluate the efficiency in presentation of better alternatives related to personal and environmental situations. Obtained results indicate that the criterion "proportion and adaptation to the environment" with the weighted average of 33.6% is the most important criterion from experts viewpoints. While prevention alternatives of land usage unsuitable of reveres and conversion with 22.88% mean weight and vegetation cover development and reclamation with 21.9% mean weight are recognized ordinarily as the most important de-desertification alternatives in region. Finally, sensitivity analysis is performed in detail by varying the objective factor decision weight, the priority weight of subjective factors, and the gain factors. After the fulfillment of sensitivity analysis and determination of the most sensitive criteria and alternatives, the former classification and ranking of alternatives does not change so much, and it was observed that unsuitable land use alternative with the preference degree of 22.7% was still in the first order of priority. The final priority of livestock grazing control alternative was replaced with the alternative of modification of ground water harvesting.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.     

Evaporative mass transfer behavior of a complex immiscible liquid

A series of laboratory experiments was conducted with a multiple-component immiscible liquid, collected from the Picillo Farm Superfund Site in Rhode Island, to examine liquid-vapor mass-transfer behavior. The immiscible liquid, which comprises solvents, oils, pesticides, PCBs, paint sludges, explosives, and other compounds, was characterized using gas chromatography and gas chromatography/mass spectrometry to determine mole fractions of selected constituents. Batch experiments were conducted to evaluate equilibrium phase-partitioning behavior. Two sets of air-stripping column studies were conducted to examine the mass-transfer dynamics of five selected target compounds present in the immiscible-liquid mixture. One set of column experiments was designed to represent a system with free-phase immiscible liquid present; the other was designed to represent a system with a residual phase of immiscible liquid. Initial elution behavior of all target components generally appeared to be ideal for both systems, as the initial vapor-phase concentrations were similar to vapor-phase concentrations measured for the batch experiment and those estimated using Raoult's law (incorporating the immiscible-liquid composition data). Later-stage removal of 1,2-dichlorobenzene appeared to be rate limited for the columns containing free-phase immiscible liquid and no porous medium. Conversely, evaporative mass transfer appeared to be ideal throughout the experiment conducted with immiscible liquid distributed relatively uniformly as a residual phase within a sandy porous medium.     

Mercury and other element exposure to tree swallows (Tachycineta bicolor) nesting on Lostwood National Wildlife Refuge, North Dakota

Elevated mercury concentrations in water were reported in the prairie wetlands at Lostwood National Wildlife Refuge, ND. In order to determine whether wildlife associated with these wetlands was exposed to and then accumulated higher mercury concentrations than wildlife living near more permanent wetlands (e.g. lakes), tree swallow (Tachycineta bicolor) eggs and nestlings were collected from nests near seasonal wetlands, semi-permanent wetlands, and lakes. Mercury concentrations in eggs collected near seasonal wetlands were higher than those collected near semi-permanent wetlands or lakes. In contrast, mercury concentrations in nestling livers did not differ among wetland types. Mercury and other element concentrations in tree swallow eggs and nestlings collected from all wetlands were low. As suspected from these low concentrations, mercury concentrations in sample eggs were not a significant factor explaining the hatching success of the remaining eggs in each clutch.