Air intake contamination by building exhausts: tracer gas investigation of atmospheric dispersion models in the urban environment

The establishment of a safe distance between sources of pollution and air intakes is based on a complex exercise that should take into account several wind, physical, and topographical factors. To estimate the maximum concentrations of the pollutants as a function of the distance from the emission source, some heating, ventilation, and air conditioning (HVAC) system designers use the atmospheric dispersion models suggested by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). Two of these models, the Halitsky and Wilson-Chui-Lamb models, have been developed and evaluated mainly with laboratory data. There have been relatively few evaluations with full-scale field data. The objective of this study, carried out on a building in downtown Montreal, Quebec, Canada, was to compare the measured concentrations of a tracer gas emitted by an exhaust stack with those predicted by these models. The results indicate that the Halitsky model gives lower than actual dilution, while the Wilson-Chui-Lamb model generally gives acceptable estimates, with occasional over-estimations of the dilution.     

A Note on the Emission of Nitrogen Oxides from Silage in Opened Bunker Silos

The evolution of NO_x from grass and maize silages wasmeasured using chemiluminescence in samples kept in airtightcontainers, in the silos and in a 750 kg mass removed to a mixer waggon. Measurements were made on the grass and maizesilos in two consecutive years. The results show that thereis continuous evolution of NO_x after silos have been opened and that high concentrations persist in the mass whichare rapidly released on agitation at the feed-out. The maximumrecorded concentrations of NO and NO₂ were 1985 and 152 ppbv respectively. These values are orders of magnitude greaterthan for rural background levels and exceed the maximum hourlyexposure of 50 ppbv for NO₂ recommended by the UK expertpanel for quality standards.     

The role of Raman spectroscopy in the analytical chemistry of potable water

Advances in instrumentation are making Raman spectroscopy the tool of choice for an increasing number of chemical applications. For example, many recalcitrant industrial process monitoring problems have been solved in recent years with in-line Raman spectrometers. Raman is attractive for these applications for many reasons, including remote non-invasive sampling, minimal sample preparation and tolerance of water. To a lesser extent, Raman spectroscopy is beginning to play a significant role in environmental analysis for the same reasons. At present, the environmental applications typically apply only to the most contaminated situations due to the still relatively high limits of detection. However, some emerging sampling technologies hold out the promise that Raman may soon be more widely applicable to the analytical chemistry of potable water. Herein we discuss these recent advances, summarize some examples of environmental applications to aqueous systems and suggest avenues of future developments that we expect to be most useful for potable water analysis. Also, a simplified, but detailed, theory of normal Raman scattering is presented. While resonance-enhanced Raman spectroscopy, surface-enhanced Raman spectroscopy and non-linear Raman techniques are briefly discussed, their theories and instrumental configurations are not addressed. Also, this article deals primarily with the modern dispersive Raman experiment (as opposed to the Fourier transform Raman experiment), because it seems most suited for potable water analysis. The goal of this article is to give the environmental scientist with no specialized knowledge of the topic just enough theory and background to evaluate the utility of this rapidly developing analytical tool.     

Quantifying 137Cs aggregated transfer coefficients in a semi-natural woodland ecosystem adjacent to a nuclear reprocessing facility

Radiocaesium (137Cs) activity concentrations and aggregated transfer factors (Tag values) were calculated for vascular plants, fungal fruiting bodies and invertebrates in a semi-natural Picea sitchensis woodland (Lady Wood) adjacent to the British Nuclear Fuels plc. reprocessing facility at Sellafield, Cumbria, UK. The Tag values for vascular plants ranged from 7.1 x 10(-4) - 1.9 x 10(-2) m2 kg(-1), the maximum value being for Pteridium aquilinum. Fungal fruiting bodies had higher Tag values (1.9 x 10(-3) - 1.8 x 10(-1) m2 kg(-1)) than vascular plants, with a maximum value for Mycena galericulata. None of the activity concentrations for edible foodstuffs collected within this study (fungi and berries) exceeded the EC recommended limits of 137Cs in foodstuffs grown within the UK. The invertebrate community sampled during the study had Tag values ranging from 3.4 x 10(-4) to 1.3 x 10(-2) m2 kg(-1). There were no systematic differences in 137Cs activity concentration between invertebrate guilds, or between seasonal cohorts within guilds. The invertebrates in Lady Wood were exposed to a dose from 137Cs (internal gamma + beta and external gamma) ranging between 4.37 x 10(-4) and 6.40 x 10(-4) mGy day(-1). Including dose from radionuclides other than 137Cs and accounting for uncertainties due to the relative biological effectiveness of differing radionuclides could increase total dose by approximately an order of magnitude. These dose rates are at least three orders of magnitude lower than the 1 mGy d(-1) level at which harm may be caused to terrestrial biota, hence the risk to the invertebrate community from the effects of ionising radiation in Lady Wood is low.     

Impacts of biodiesel on pollutant emissions of a JP-8-fueled turbine engine

The impacts of biodiesel on gaseous and particulate matter (PM) emissions of a JP-8-fueled T63 engine were investigated. Jet fuel was blended with the soybean oil-derived methyl ester biofuel at various concentrations and combusted in the turbine engine. The engine was operated at three power settings, namely ground idle, cruise, and takeoff power, to study the impact of the biodiesel at significantly different pressure and temperature conditions. Particulate emissions were characterized by measuring the particle number density (PND; particulate concentration), the particle size distribution, and the total particulate mass. PM samples were collected for offline analysis to obtain information about the effect of the biodiesel on the polycyclic aromatic hydrocarbon (PAH) content. In addition, temperature-programmed oxidation was performed on the collected soot samples to obtain information about the carbonaceous content (elemental or organic). Major and minor gaseous emissions were quantified using a total hydrocarbon analyzer, an oxygen analyzer, and a Fourier Transform IR analyzer. Test results showed the potential of biodiesel to reduce soot emissions in the jet-fueled turbine engine without negatively impacting the engine performance. These reductions, however, were observed only at the higher power settings with relatively high concentrations of biodiesel. Specifically, reductions of approximately 15% in the PND were observed at cruise and takeoff conditions with 20% biodiesel in the jet fuel. At the idle condition, slight increases in PND were observed; however, evidence shows this increase to be the result of condensed uncombusted biodiesel. Most of the gaseous emissions were unaffected under all of the conditions. The biodiesel was observed to have minimal effect on the formation of polycyclic aromatic hydrocarbons during this study. In addition to the combustion results, discussion of the physical and chemical characteristics of the blended fuels obtained using standard American Society for Testing and Materials (ASTM) fuel specifications methods are presented.     

Fate of phosphorus in dairy wastewater and poultry litter applied on grassland

Large and repeated manure applications can exceed the P sorption capacity of soil and increase P leaching and losses through subsurface drainage. The objective of this study was to evaluate the fate of P applied with increasing N rates in dairy wastewater or poultry litter on grassland during a 4-yr period. In addition to P recovery in forage, soil-test phosphorus (STP) was monitored at depths to 180 cm in a Darco loamy sand (loamy, siliceous, semiactive, thermic Grossarenic Paleudults) twice annually. A split-plot arrangement of a randomized complete block design comprised four annual N rates (0, 250, 500, and 1000 kg ha(-1)) for each nutrient source on coastal bermudagrass [Cynodon dactylon (L.) Pers.] over-seeded with ryegrass (Lolium multiflorum L. cv. TAM90). Increasing annual rates of N and P in wastewater and poultry litter increased P removal in forage (P = 0.001). At the highest N rate of each nutrient source, less than 13% of applied P was recovered in forage. The highest N rates delivered 8 times more P in wastewater or 15 times more P in poultry litter than was removed in forage harvests during an average year. Compared with controls, annual P rates up to 188 kg ha(-1) in dairy wastewater did not increase STP concentrations at depths below 30 cm. In contrast, the highest annual P rate (590 kg ha(-1)) in poultry litter increased STP above that of controls at depth intervals to 120 cm during the first year of sampling. Increases in STP at depths below 30 cm in the Darco soil were indicative of excessive P rates that could contribute to nonpoint-source pollution in outflows from subsoil through subsurface drainage.     

White birch (Betula papyrifera Marshall) foliar litter decomposition in relation to trace metal atmospheric inputs at metal-contaminated and uncontaminated sites near Sudbury, Ontario and Rouyn-Noranda, Quebec, Canada

Decomposition of white birch (Betula papyrifera Marshall) foliar litter was examined at metal-contaminated and uncontaminated sites established along gradients of soil Cu, Ni, Pb and Zn concentrations near Sudbury, Ontario and Rouyn-Noranda, Quebec. Over an 18-month study period, a significantly lower rate of litter mass loss was observed at the Sudbury contaminated site (S1) than at the uncontaminated site (S2). This result was not duplicated at corresponding sites (RN1, RN2) in Rouyn-Noranda, despite similar levels of soil metal contaminants and atmospheric inputs. Concentrations of metals in litter increased at all sites with time. However, the greatest litter Cu and Ni concentrations were observed at S1 (188 and 192 microg/g, respectively), a result of substantial net gains of these elements from atmospheric inputs. On a per hectare basis, Cu accumulation in litter at S1 approached recommended application rates of Cu as copper sulphate for control of fungal diseases in agricultural operations, indicating that the current rate of Cu smelter emissions in Sudbury may cause the observed impairment of decomposition.     

Local Authority/AcademicCollaboration and Local Agenda 21 Policy Processes

This paper looks at a recent example of local authority/academiccollaboration over a protracted period of time from the different perspectives of those people who were directly involved in the process as key role players. The arena within which this collaboration took place (Local Agenda 21 policy-making in Manchester) has some particular characteristics of its own which influenced this process, and these are identified alongside some of the theoretical issues which affect the way collaborations of this kind are perceived and (much more rarely) are written about. The perspectivesof the client and of the contractor, as the authors reflect on their experiences in these roles, show that in practice processes of adjustment and of learning were taking place, because both sides for various reasons found that the dynamics of this situation meant that their preconceptions both of each other and of the contractual relationship they had thought they were entering had to be modified as the process unfolded. The paper concludes with both specific observations about this collaboration, and more general and more tentative comments about issues that might be experienced in future collaborations of this kind.     

STREAM MEANDER RESTORATION1

ABSTRACT: Stream meander restoration designs currently used by many state and local government agencies are often based on empirical equations, such as those developed by Leopold and Wolman (1957; 1960). In order to assess the suitability of these equations and propose alternative strategies, 18 sites in Central Maryland were selected and data on channel planform, cross-sections, sediments, and spacing and sizing of the pools and riffles were collected and analyzed to characterize the channel type in the study area. A large bias was found comparing the meander parameters measured to those computed using the Leopold and Wolman equations for the streams in central Maryland. Based on these results, appropriate empirical equations for the study area that can assist in stream restoration designs were investigated. An additional approach that can assist in stream restoration consists of the application of a detailed stream reconnaissance to verify that the restoration project is consistent with the natural form and processes of the river.