Screening Capsicum chinense fruits for heavy metals bioaccumulation

Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin were grown in a silty-loam soil under field conditions. At maturity, fruits were collected and analyzed for seven heavy metals (Cd, Cr, Ni, Pb, Zn, Cu, and Mo) concentrations. The main objectives of this investigation were: 1) to determine the concentrations of seven heavy metals in the soil and monitor their accumulation in mature fruits, 2) to categorize the pepper accessions as low or high heavy metal accumulators, and 3) to determine if heavy metal content of the pepper fruit was lower than the permitted limits. Concentrations and relative proportions of heavy metals in pepper fruits of C. chinense varied among accessions. Fruits of Plant Introduction (PI) 355820 accumulated significant concentrations of Cd (0.47 μ g g^?1dry fruit). PI-260522 accumulated the highest concentration of Pb (2.12 μ g g^?1 dry fruit) among the 63 accessions tested. This accession (PI-260522) contained about twice the Pb limit on a fresh weight basis. Among the 63 accessions analyzed, PI-238051 contained the highest levels of Ni (17.2 μ g g^?1). We concluded that high accumulator genotypes may be useful for phytoremediation, while, low accumulator accessions might be appropriate selections for growing on Cd-, Pb-, or Ni-contaminated soils to prevent potential human exposure to heavy metals and health hazards through the food chain.     

Arizona Hazardous Air Pollutants Monitoring Program

ABSTRACT

In order to evaluate the existing risk to public health in Arizona related to hazardous air pollution, ambient air monitoring for selected hazardous air pollutants (HAPs) was carried out in 1994-1996 in several representative urban and rural areas of Arizona. A wide range of organic HAPs was monitored, requiring a variety of sampling and analysis methods. Stainless steel SUMMA canisters were used for collection of volatile hydrocarbons and halocarbons, which were analyzed by capillary gas chromatography with flame ionization and electron capture detection (GC-FID/ECD). Carbonyl compounds were collected using 2,4-dinitrophenylhydrazine-impregnated cartridges and analyzed by high performance liquid chromatog-raphy with ultraviolet detection. Semi-volatile and non-volatile polycyclic aromatic compounds were collected using a sampling train consisting of a filter followed by a PUF/XAD-4/PUF sandwich cartridge. Following extraction, samples were analyzed by capillary GC with mass spectrometric detection (GC-MS). Database software was developed for data processing and reporting functions. This paper describes the sampling strategy and the sampling and analysis methods employed in the monitoring program and presents a summary of all the results obtained during the duration of the sampling program.     

Demonstrations of coal-fired oxy-fuel technology for carbon capture and storage and issues with commercial deployment

As one of the three major carbon capture technologies associated with carbon capture and storage (CCS), oxy-fuel technology is currently undergoing rapid development with a number of international demonstration projects of scale 10–30 MW_e having commenced and units with a scale of 250–300 MW_e emerging in the progression towards commercialisation. Industrial scale testing of coal combustion and burners is also being conducted by technology vendors.The paper details the current international status of the technology; the contributions of current demonstrations; and a roadmap for commercial deployment.At its current state of maturity oxy-fuel technology may be considered semi-commercial, in that even if a unit was economically viable and could be provided by a vendor, the generator and vendor would need to share the technical risk. This is because guarantees could not at present be provided for operating characteristics associated with mature technologies such as reliability, emissions, ramp rate and spray control. This is due to the maturity of the technology associated with the capability of vendors and associated design and operational uncertainties, associated with a lack of plant experience at scale.The projected development of oxy-fuel technology for first-generation plant is provided, using an ASU for oxygen supply, standard furnace designs with externally recirculated flue gas, and limited thermal integration of the ASU and compression plant with the power plant. Potential features of second generation technology are listed.Listed issues delaying deployment indicate that market, economic, legal and issues of public acceptance are more significant than technical barriers.     

Movement distances enhance validity of predictive models

Including the distance species are able to move in predictive models improves conservation practice. Bird inventory projects carried out from 1993 to 2004 in Taiwan provide an opportunity to investigate the relationships among species distribution, movement distance, and the environment. We compared projected distributions of 17 Taiwanese endemic bird species using what we called the Standard Method (i.e. movement distance is zero) and what we called the Buffer Method (i.e. movement distance is longer than zero) in three presence-only models (GARP, MAXENT and LIVES). The Standard Method used species original occurrence records directly while the Buffer Method expanded the occurrence of species to areas 1 km² around each recorded location. We first tested the efficacy of the Buffer Method using ten common species of the 17, and then applied the method to two rare species of the 17. For both the common and rare species, the distributions predicted by the two methods showed slight but important differences. The Buffer Method for all species had a higher average predictive probability, while the Standard Method had a higher maximum predictive probability. Most of the values for the area under the curve (AUC) were over 0.8 with the exceptions of Taiwan Barbet (Megalaima nuchalis) and Taiwan Hwamei (Garrulax taewanus), which have recently separated from Indochinese Barbet (Megalaima annamensis) and Chinese Hwamei (Garrulax canorus), and since 2008 and 2006 have been regarded as species endemic to the study area. Kappa values showed good performance for all species using both methods. The Buffer Method, however, resulted in significantly higher sensitivity and accuracy values for all models of species (p < 0.05). We conclude that when modeling species distribution including the area where the species was censused along with areas within the minimum movement areas better defines the surrounding areas that might supplement core habitat requirements. Therefore, using the Buffer Method, species surrounding distribution can be obtained which provides a better understanding of the species distributions. Given that distribution size is a key to the conservation of species, we suggest the Buffer Method can be used in conservation planning.     

Post-explosion observations of experimental mine and laboratory coal dust explosions

The Pittsburgh Research Laboratory (PRL) of the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA) conducted joint research on dust explosions by studying post-explosion dust samples. The samples were collected after full-scale explosions at the PRL Lake Lynn Experimental Mine (LLEM), and after laboratory explosions in the PRL 20-L chamber and the Fike 1 m³ chamber. The dusts studied included both high- and low-volatile bituminous coals. Low temperature ashing for 24 h at 515 °C was used to measure the incombustible content of the dust before and after the explosions. The data showed that the post-explosion incombustible content was always as high as, or higher than the initial incombustible content. The MSHA alcohol coking test was used to determine the amount of coked dust in the post-explosion samples. The results showed that almost all coal dust that was suspended within the explosion flame produced significant amounts of coke. Measurements of floor dust concentrations after LLEM explosions were compared with the initial dust loadings to determine the transport distance of dust during an explosion. All these data will be useful in future forensic investigations of accidental dust explosions in coal mines, or elsewhere.     

Occupational stress: Coping of police and their spouses

One hundred seventy-seven police officers and their spouses from two metropolitan areas completed separate questionnaires regarding stress and coping. Both the police and spouses reported using four coping activities in response to their own stressors: problem focused, emotion focused, religiosity, and rugged individualism. Three potential police strains previously noted in non-empirical literature were given special attention; divorce potential, drinking behavior, and suicide thoughts.     

The moderating role of task characteristics in determining responses to a stressful work simulation

Two experimental studies were conducted to examine whether the stress‐buffering effects of behavioral control on work task responses varied as a function of procedural information. Study 1 manipulated low and high levels of task demands, behavioral control, and procedural information for 128 introductory psychology students completing an in‐basket activity. ANOVA procedures revealed a significant three‐way interaction among these variables in the prediction of subjective task performance and task satisfaction. It was found that procedural information buffered the negative effects of task demands on ratings of performance and satisfaction only under conditions of low behavioral control. This pattern of results suggests that procedural information may have a compensatory effect when the work environment is characterized by a combination of high task demands and low behavioral control. Study 2 (N=256) utilized simple and complex versions of the in‐basket activity to examine the extent to which the interactive relationship among task demands, behavioral control, and procedural information varied as a function of task complexity. There was further support for the stress‐buffering role of procedural information on work task responses under conditions of low behavioral control. This effect was, however, only present when the in‐basket activity was characterized by high task complexity, suggesting that the interactive relationship among these variables may depend on the type of tasks performed at work. Copyright © 1999 John Wiley & Sons, Ltd.     

Denitrification in constructed wetlands used for treatment of swine wastewater

Constructed wetland treatment of swine wastewater probably involves substantial denitrification. Our objective was to assess denitrification and denitrification enzyme activity (DEA) in such wetlands in relation to plant communities, N loading, carbon or nitrogen limitations, and water depth. Two wetland cells each 3.6 m wide and 33.5 m long were connected in series. One set of cells was planted with rushes and bulrushes, including soft rush (Juncus effusus L.), softstem bulrush [Schoenoplectus tabernaemontani (K.C. Gmel.) Pallal, American bulrush [Schoenoplectus americanus (Pers.) Volkart ex Schinz & R. Keller], and woolgrass bulrush [Scirpus cyperinus (L.) Kunth]. Another set was planted with bur-reeds and cattails, including American bur-reed (Sparganium americanum Nutt.), broadleaf cattail (Typha latifolia L.), and narrowleaf cattail (Typha angustifolia L.). The sets will be referred to herein as bulrush and cattail wetlands, respectively. Denitrification and DEA were measured via the acetylene inhibition method in intact soil cores and disturbed soil samples that were taken during four years (1994-1997). Although DEA in the disturbed samples was greater than denitrification in the core samples, the measurements were highly correlated (r2 > or = 0.82). The DEA was greater in the bulrush wetlands than the cattail wetlands, 0.516 and 0.210 mg N kg(-1) soil h(-1), respectively; and it increased with the cumulative applied N. The DEA mean was equivalent to 9.55 kg N ha(-1) d(-1) in the bulrush wetlands. We hypothesized and confirmed that DEA was generally limited by nitrate rather than carbon. Moreover, we determined that one of the most influential factors in DEA was wetland water depth. In bulrush wetlands, the slope and r2 values of the control treatment were -0.013 mg N kg(-1) soil h(-1) mm(-1) depth and r2 = 0.89, respectively. Results of this investigation indicate that DEA can be very significant in constructed wetlands used to treat swine wastewater.     

Is motion more important than it sounds?: The medium of presentation in environment perception research

This study assessed the incremental validity of different media for representing landscapes with significant dynamic elements. The experimental design independently varied the presence of motion and sound in different representations of a wild and scenic river in order to evaluate the adequacy or sufficiency of the surrogate to reflect physical changes in the landscape. Three representational conditions were identified: (1) video/sound, (2) video/no sound, and (3) static/no sound. A pilot study assessed the ability of the static images to represent river flow levels per se, and confirmed comparability with prior results (Brown & Daniel, 1989, Journal of Environmental Psychology, 7, 233–250). Scenic beauty judgments were then collected within each representational condition. Multiple regression analyses were used to determine the relationship of flow level to perceived scenic beauty for each representation condition. The results demonstrated that motion and sound, individually and conjointly, influenced judgements of scenic beauty for a landscape with a significant dynamic element.