(137)Cs inter-plant concentration ratios provide a predictive tool for coral atolls with distinct benefits over transfer factors

Inter-plant concentration ratios (IPCR) [Bqg(-1)(137)Cs in coral atoll tree food crops/Bqg(-1)(137)Cs in leaves of native plant species whose roots share a common soil volume] can replace transfer factors (TF) to predict (137)Cs concentration in tree food crops in a contaminated area with an aged source term. The IPCR strategy has significant benefits relative to TF strategy for such purposes in the atoll ecosystem. IPCR strategy applied to specific assessments takes advantage of the fact that tree roots naturally integrate (137)Cs over large volumes of soil. Root absorption of (137)Cs replaces large-scale, expensive soil sampling schemes to reduce variability in (137)Cs concentration due to inhomogeneous radionuclide distribution. IPCR [drinking-coconut meat (DCM)/Scaevola (SCA) and Tournefortia (TOU) leaves (native trees growing on all atoll islands)] are log-normally distributed (LND) with geometric standard deviation (GSD)=1.85. TF for DCM from Enewetak, Eneu, Rongelap and Bikini Atolls are LND with GSDs of 3.5, 3.0, 2.7, and 2.1, respectively. TF GSD for Rongelap copra coconut meat is 2.5. IPCR of Pandanus fruit to SCA and TOU leaves are LND with GSD=1.7 while TF GSD is 2.1. Because IPCR variability is much lower than TF variability, relative sampling error of an IPCR field sample mean is up 6- to 10-fold lower than that of a TF sample mean if sample sizes are small (10-20). Other IPCR advantages are that plant leaf samples are collected and processed in far less time with much less effort and cost than soil samples.     

Evaluation of the digital opacity compliance system in high mountain desert environments

The digital opacity compliance system (DOCS) has been proposed as an alternative to the U.S. Environmental Protection Agency Reference Method 9 (Visual Determination of the Opacity of Emissions for Stationary Sources). The DOCS, which employs standard digital photography to estimate the opacity of visible emissions, was evaluated in a high mountain desert environment located in Weber County, UT. The DOCS recorded an average opacity deviation of 5.28% when applied to black smoke plumes having true opacities in the range of 0-100%, an error rate that was found to be significantly less than 7.5% (allowable error rate for attaining certification under Method 9). In contrast, results from estimating the opacity of white smoke plumes indicated that the accuracy of the DOCS was less than the Method 9 error rate only in the opacity range of 0-60%, over which the DOCS average opacity deviation was determined to be 6.7%. For the 0-40% opacity range, the DOCS recorded an average opacity deviation of 5.44% and 5.9% for black and white plumes, respectively. Results from the present study suggest that the DOCS has the potential to quantify visible opacity with an error rate that is significantly less than the Method 9 permissible error rate. Although encouraging, it is unclear to what extent the DOCS is affected by climatic conditions other than those encountered in a dry desert environment. Future studies should focus on evaluating the performance of the DOCS under variable weather conditions.     

Modeling methane oxidation in landfill cover soils as indicator of functional stability with respect to gas management

A performance-based method for evaluating methane (CH₄) oxidation as the best available control technology (BACT) for passive management of landfill gas (LFG) was applied at a municipal solid waste (MSW) landfill in central Washington, USA, to predict when conditions for functional stability with respect to LFG management would be expected. The permitted final cover design at the subject landfill is an all-soil evapotranspirative (ET) cover system. Using a model, a correlation between CH₄ loading flux and oxidation was developed for the specific ET cover design. Under Washington’s regulations, a MSW landfill is functionally stable when it does not present a threat to human health or the environment (HHE) at the relevant point of exposure (POE), which was conservatively established as the cover surface. Approaches for modeling LFG migration and CH₄ oxidation are discussed, along with comparisons between CH₄ oxidation and biodegradation of non-CH₄ organic compounds (NMOCs). The modeled oxidation capacity of the ET cover design is 15 g/m²/day under average climatic conditions at the site, with 100% oxidation expected on an annual average basis for fluxes up to 8 g/m²/day. This translates to a sitewide CH₄ generation rate of about 260 m³/hr, which represents the functional stability target for allowing transition to cover oxidation as the BACT (subject to completion of a confirmation monitoring program). It is recognized that less than 100% oxidation might occur periodically if climate and/or cover conditions do not precisely match the model, but that residual emissions during such events would be de minimis in comparison with published limit values. Accordingly, it is also noted that nonzero net emissions may not represent a threat to HHE at a POE (i.e., a target flux between 8 and 15 g/m²/day might be appropriate for functional stability) depending on the site reuse plan and distance to potential receptors.

Implications: This study provides a scientifically defensible method for estimating when methane oxidation in landfill cover soils may represent the best available control technology for residual landfill gas (LFG) emissions. This should help operators and regulators agree on the process of safely eliminating active LFG controls in favor of passive control measures once LFG generation exhibits asymptotic trend behavior below the oxidation capacity of the soil. It also helps illustrate the potential benefits of evolving landfill designs to include all-soil vegetated evapotranspirative (ET) covers that meet sustainability objectives as well as regulatory performance objectives for infiltration control.     

Effects of changes in climate on landscape and regional processes, and feedbacks to the climate system

Biological and physical processes in the Arctic system operate at various temporal and spatial scales to impact large-scale feedbacks and interactions with the earth system. There are four main potential feedback mechanisms between the impacts of climate change on the Arctic and the global climate system: albedo, greenhouse gas emissions or uptake by ecosystems, greenhouse gas emissions from methane hydrates, and increased freshwater fluxes that could affect the thermohaline circulation. All these feedbacks are controlled to some extent by changes in ecosystem distribution and character and particularly by large-scale movement of vegetation zones. Indications from a few, full annual measurements of CO2 fluxes are that currently the source areas exceed sink areas in geographical distribution. The little available information on CH4 sources indicates that emissions at the landscape level are of great importance for the total greenhouse balance of the circumpolar North. Energy and water balances of Arctic landscapes are also important feedback mechanisms in a changing climate. Increasing density and spatial expansion of vegetation will cause a lowering of the albedo and more energy to be absorbed on the ground. This effect is likely to exceed the negative feedback of increased C sequestration in greater primary productivity resulting from the displacements of areas of polar desert by tundra, and areas of tundra by forest. The degradation of permafrost has complex consequences for trace gas dynamics. In areas of discontinuous permafrost, warming, will lead to a complete loss of the permafrost. Depending on local hydrological conditions this may in turn lead to a wetting or drying of the environment with subsequent implications for greenhouse gas fluxes. Overall, the complex interactions between processes contributing to feedbacks, variability over time and space in these processes, and insufficient data have generated considerable uncertainties in estimating the net effects of climate change on terrestrial feedbacks to the climate system. This uncertainty applies to magnitude, and even direction of some of the feedbacks.     

Environmentally stratified sampling design for the development of Great Lakes environmental indicators

Understanding the relationship between human disturbance and ecological response is essential to the process of indicator development. For large-scale observational studies, sites should be selected across gradients of anthropogenic stress, but such gradients are often unknown for a population of sites prior to site selection. Stress data available from public sources can be used in a geographic information system (GIS) to partially characterize environmental conditions for large geographic areas without visiting the sites. We divided the U.S. Great Lakes coastal region into 762 units consisting of a shoreline reach and drainage-shed and then summarized over 200 environmental variables in seven categories for the units using a GIS. Redundancy within the categories of environmental variables was reduced using principal components analysis. Environmental strata were generated from cluster analysis using principal component scores as input. To protect against site selection bias, sites were selected in random order from clusters. The site selection process allowed us to exclude sites that were inaccessible and was shown to successfully distribute sites across the range of environmental variation in our GIS data. This design has broad applicability when the goal is to develop ecological indicators using observational data from large-scale surveys.     

Compartmentation of metals in foliage of Populus tremula grown on soils with mixed contamination. I. From the tree crown to leaf cell level

In order to achieve efficient phytoextraction of heavy metals using trees, the metal allocation to aboveground tissues needs to be characterised. In his study, the distribution of heavy metals, macro- and micronutrients and the metal micro-localisation as a function of the leaf position and heavy metal treatment were analysed in poplars grown on soil with mixed metal contamination. Zinc was the most abundant contaminant in both soil and foliage and, together with cadmium, was preferentially accumulated in older foliage whereas excess copper and lead were not translocated. Changes in other element concentrations indicated an acceleration in aging as a consequence of the metal treatment. Excess zinc was irregularly accumulated inside leaf tissues, tended to saturate the veins and was more frequently stored in cell symplast than apoplast. Storage compartments including metabolically safe and sensitive subcellular sites resulted in sizable metal accumulation as well as stress reactions.     

Plants with phytotoxic potential: Wollemi pine (Wollemia nobilis)

Herbicide resistance in annual ryegrass (ARG, Lolium rigidum) threatens the quality and yield of winter wheat crops in Australia, prompting research to discover novel natural plant compounds with herbicidal properties. Due to its novel nature and potentially interesting chemistry, the Australian native, Wollemi pine (Wollemia nobilis), was tested for its ability to suppress ARG growth and its feasibility for use in weed control strategies. The leaf extract of Wollemi pine significantly inhibited the growth of ARG and wild radish (Raphanus raphanistrum) in laboratory bioassays at concentrations above 1% extract. In soil trials, the 100% extract (100 g dried plant material/L) inhibited the dry weight of ARG by 25%. The addition of a wetting agent to the extract increased the suppression of ARG to 80% which was as phytotoxic as a 4-fold increase in the extract concentration (“400%” extract). Using bioassay-guided fractionation, the most phytotoxic fraction was identified and further analysed via GC/MS. Several compounds not previously identified in Wollemi pine leaf extracts have been identified, namely, 2-propylphenol, 3,4-dimethoxyphenol, 2-methoxybenzoic acid, vanillyl alcohol and isovanillic acid. These results suggest that Wollemi pine is an important potential source of compounds for the control of ARG and wild radish in winter crops.     

Hazardous Waste Minimization: Part II Waste Minimization in the Electronics Products Industries

An overview is provided of the production processes, waste generation, and waste management of the electronics products industries. Chosen product areas include electron tubes, semiconductors, capacitors/resistors, and printed circuit/wiring boards. Examples are given of specific processes and associated waste streams. Waste minimization activities are identified, and specific examples of successful applications provided. While faced with a wide variety of waste streams, many opportunities for waste minimization exist and await only application.     

I will not go,I cannot go: cultural and social limitations of disaster preparedness in Asia,Africa, and Oceania

While much work has been invested in addressing the economic and technical basis of disaster preparedness, less effort has been directed towards understanding the cultural and social obstacles to and opportunities for disaster risk reduction. This paper presents local insights from five different national settings into the cultural and social contexts of disaster preparedness. In most cases, an early warning system was in place, but it failed to alert people to diverse environmental shocks. The research findings show that despite geographical and typological differences in these locations, the limitations of the systems were fairly similar. In Kenya, people received warnings, but from contradictory systems, whereas in the Philippines and on the island of Saipan, people did not understand the messages or take them seriously. In Bangladesh and Nepal, however, a deeper cultural and religious reasoning serves to explain disasters, and how to prevent them or find safety when they strike.