The development of loads of cations, anions, Cd and Pb in precipitation and of atmospheric concentrations of N-components, in Switzerland from 1988 to 2003

This study presents the results of the analyses of Cd, Pb, cations and anions present in precipitation and dust at a pre-alpine and a suburban site in Switzerland in the period from 1988 to 2003. The aim of these measurements was to monitor the success of measures taken to diminish pollutant emissions. No change was found for Ca²⁺, K⁺, Na⁺ and Mg²⁺ loads – in line with expectations, as no reducing measures had been taken. Statistically significant and largely decreasing values (50–90%) were found for Cl⁻ and Cd (linked to the fitting of filters in incineration plants), Pb (unleaded petrol), (diminishing the use of mineral oil with high S content), and the proton (lower HCl and SO₂ emissions). A smaller decrease (up to 30%) or none was registered for oxidised nitrogen components (fitting cars with catalytic converters, but an increase in numbers of cars and trucks). No significant change was found for NH₃ as farming techniques had undergone no major changes. The long-term measurements show that the measures taken to reduce emissions were successful. A shorter monitoring period would have been misleading owing to data variability and temporary incidents e.g. amount of precipitation.     

Operator-splitting errors in coupled reactive transport codes for transient variably saturated flow and contaminant transport in layered soil profiles

One possible way of integrating subsurface flow and transport processes with (bio)geochemical reactions is to couple by means of an operator-splitting approach two completely separate codes, one for variably-saturated flow and solute transport and one for equilibrium and kinetic biogeochemical reactions. This paper evaluates the accuracy of the operator-splitting approach for multicomponent systems for typical soil environmental problems involving transient atmospheric boundary conditions (precipitation, evapotranspiration) and layered soil profiles. The recently developed HP1 code was used to solve the coupled transport and chemical equations. For steady-state flow conditions, the accuracy was found to be mainly a function of the adopted spatial discretization and to a lesser extent of the temporal discretization. For transient flow situations, the accuracy depended in a complex manner on grid discretization, time stepping and the main flow conditions (infiltration versus evaporation). Whereas a finer grid size reduced the numerical errors during steady-state flow or the main infiltration periods, the errors sometimes slightly increased (generally less than 50%) when a finer grid size was used during periods with a high evapotranspiration demand (leading to high pressure head gradients near the soil surface). This indicates that operator-splitting errors are most significant during periods with high evaporative boundary conditions. The operator-splitting errors could be decreased by constraining the time step using the performance index (the product of the grid Peclet and Courant numbers) during infiltration, or the maximum time step during evapotranspiration. Several test problems were used to provide guidance for optimal spatial and temporal discretization.     

Optimizing best management practices to control anthropogenic sources of atmospheric phosphorus deposition to inland lakes

Excessive phosphorus loading to inland freshwater lakes around the globe has resulted in nuisance plant growth along the waterfronts, degraded habitat for cold-water fisheries, and impaired beaches, marinas, and waterfront property. The direct atmospheric deposition of phosphorus can be a significant contributing source to inland lakes. The atmospheric deposition monitoring program for Lake Simcoe, Ontario, indicates roughly 20% of the annual total phosphorus load (2010–2014 period) is due to direct atmospheric deposition (both wet and dry deposition) on the lake. This novel study presents a first-time application of the genetic algorithm (GA) methodology to optimize the application of best management practices (BMPs) related to agriculture and mobile sources to achieve atmospheric phosphorus reduction targets and restore the ecological health of the lake. The novel methodology takes into account the spatial distribution of the emission sources in the airshed, the complex atmospheric long-range transport and deposition processes, cost and efficiency of the popular management practices, and social constraints related to the adoption of BMPs. The optimization scenarios suggest that the optimal overall capital investment of approximately $2M, $4M, and $10M annually can achieve roughly 3, 4, and 5 tonnes reduction in atmospheric P load to the lake, respectively. The exponential trend indicates diminishing returns for the investment beyond roughly $3M per year and that focusing much of this investment in the upwind, nearshore area will significantly impact deposition to the lake. The optimization is based on a combination of the lowest cost, most beneficial and socially acceptable management practices that develops a science-informed promotion of implementation/BMP adoption strategy. The geospatial aspect to the optimization (i.e., proximity and location with respect to the lake) will help land managers to encourage the use of these targeted best practices in areas that will most benefit from the phosphorus reduction approach.

Implications: Excessive phosphorus loading to inland freshwater lakes around the globe has resulted in nuisance plant growth along the waterfronts, degraded habitat for cold water fisheries, and impaired beaches, marinas and waterfront property. This novel study presents a first-time application of the Genetic Algorithm methodology to optimize the application of best management practices related to agriculture and mobile sources to achieve atmospheric phosphorus reduction targets and restore the ecological health of the lake. The novel methodology takes into account the spatial distribution of the emission sources in the airshed, the complex atmospheric long-range transport and deposition processes, cost and efficiency of the popular management practices and social constraints related to the adoption of BMPs.     

An integrated approach to watershed management within the DPSIR framework: Axios River catchment and Thermaikos Gulf

The coastal zone of the inner Thermaikos Gulf has been influenced by eutrophication during the past decades. The conditions of the catchment area-coastal zone continuum are assessed under the holistic Driver-Pressure-State-Impact-Response (DPSIR) framework. Major socioeconomic drivers, such as industrial and agricultural development as well as urbanization, exert substantial environmental pressures on the Axios River and the Thermaikos Gulf. The Thermaikos Gulf is a highly complex system, being affected by nutrient inputs from four rivers and the City of Thessaloniki. Moreover, the Axios River which is the most significant contributor of freshwater and nutrients to the gulf, is a transboundary river shared between Greece and the Former Yugoslav Republic of Macedonia (FYROM). The two countries have not yet established a mutual management plan to control freshwater and nutrient discharges. Long-term analysis has shown that presently, more than 11,800 t of nitrogen and 3,400 t of phosphorous are released annually into the marine system. In the Antropocene era, and particularly during the past 20 years, freshwater discharges have decreased and riverine nutrients have increased, whereas inputs from domestic and industrial effluents have a decreasing trend. However, nutrient over-enrichment impacts, i.e. eutrophication, harmful algal blooms and hypoxia still have to be addressed in order to identify whether the coastal system is recovering, or whether further actions should be undertaken to control nutrient inputs from the Axios River and/or other sources. Response actions, such as the improvement of Thessalonikis wastewater treatment plant, have proved to play a positive role in the reduction of domestic wastewater input in the gulf, whereas similar facilities are completely lacking in FYROM. On the other hand, several parts of the Axios River delta are designated as protected areas, in an effort to protect environmentally rich habitats. These efforts are often disputed by local stakeholders, which have conflicting interests in the use of the hinterland and the coastal environment. The need of an integrated catchment-coastal zone management plan appears as a fundamental priority in order to protect, improve and maintain the environment, taking into account the need for economic development of the area. The DPSIR conceptual framework appears to be a valuable tool, as it enables parallel assessment of socioeconomic and environmental issues. In combination with the application of numerical models, the DPSIR analysis may provide suggestions for sustainable and environmentally-friendly measures to policy makers.SI: Pirrone     

Bioaccumulation behaviour of transplants of the lichen Flavoparmelia caperata in relation to total deposition at a polluted location in Portugal

This experiment compares the short and long time element accumulation behaviour of transplants of Flavoparmelia caperata lichen thalli and total deposition in an atmospheric polluted area. It was found that lichens exposed for a short time behaved differently from lichens in cumulative exposition suggesting the presence of acclimatization behaviour. The lichen transplant elemental content does not unequivocally represent the average or cumulative environmental availability of the exposure period. Reflection characteristics depend on the element and the lichen physiological conditions. Good correlations between lichen elemental contents and total deposition were obtained when a physiological lichen parameter was introduced in a mathematical model, suggesting that metabolically mediated accumulation is important.     

Assessment of Trace Metals in the Sediments From the Coastal Zone of Alexandria, Egypt

Freshly deposited surface sediments from the Alexandria coastal zone were collected and analysed in 1995 for their trace metal concentrations. Metal concentrations in the sediments vary between sites within a wide range for copper, zinc, iron, lead, chromium and cadmium. the statistical analysis between the metal concentrations and the different constituents (organic carbon, total nitrogen, silt, clay and total iron) showed significant correlations. the enrichment factors for the sediments ranged between 3 and 4-fold for copper, chromium and zinc and reached up to 9-fold for lead and 113-fold for cadmium. the highest index for cadmium and lead may be attributed to the anthropogenic inputs from the surrounding area, where they are highest in lower discharge areas.