Aluminium speciation in effluents and receiving waters

The respective speciation of aluminium in sewage effluent and in river water receiving effluent, has been examined. Results showed that concentrations of reactive aluminium changed over a timescale of hours and were controlled predominantly by pH. A minimum concentration of reactive aluminium occurred at a pH of approximately 6.8, coinciding with the prevalence of non-reactive, insoluble Al(OH)3 species. For receiving waters of low pH value, typically < pH 5, a large proportion of the 'naturally present' aluminium can be present in a reactive form at concentrations higher than the proposed Environmental Quality Standard (EQS). Mixing of waters of this type with effluent of a higher pH value leads to the precipitation of aluminium hydroxide. Mixing of effluent of pH value in the range 7.5-8.0 with river water in the same (or slightly higher) pH range appears to result in no appreciable change in the proportion of reactive aluminium; the change in concentration tends to be related simply to dilution. On the basis of a theoretical knowledge of aluminium speciation, results obtained in this work indicate that it is possible to make predictions about the proportion of reactive aluminium present in a receiving water, based on the pH values of the effluent water mixture and the concentration in the effluent. Reasonable comparisons between measured and predicted values were obtained at higher pH values, but the relationship was less certain at pH values less than 6.5 for which levels of reactive metal tended to be higher than the quality standard value.     

Measuring Plant Diversity in the Tall Threetip Sagebrush Steppe: Influence of Previous Grazing Management Practices

In July 2000, a 490-ha wildfire burned a portion of a long-term grazing study that had been established in 1924 at the US Sheep Experiment Station north of Dubois, Idaho, USA. Earlier vegetation measurements in this tall threetip sagebrush (Artemisia tripartita spp. tripartita) bunchgrass plant community documented significant changes in vegetation due to grazing and the timing of grazing by sheep. A study was initiated in May 2001 using 12 multiscale modified Whittaker plots to determine the consequences of previous grazing practices on postfire vegetation composition. Because there was only one wildfire and it did not burn all of the original plots, the treatments are not replicated in time or space. We reduce the potential effects of psuedoreplication by confining our discussion to the sample area only. There were a total of 84 species in the sampled areas with 69 in the spring-grazed area and 70 each in the fall- and ungrazed areas. Vegetation within plots was equally rich and even with similar numbers of abundant species. The spring-grazed plots, however, had half as much plant cover as the fall- and ungrazed plots and the spring-grazed plots had the largest proportion of plant cover composed of introduced (27%) and annual (34%) plants. The fall-grazed plots had the highest proportion of native perennial grasses (43%) and the lowest proportion of native annual forbs (1%). The ungrazed plots had the lowest proportion of introduced plants (4%) and the highest proportion of native perennial forbs (66%). The vegetation of spring-grazed plots is in a degraded condition for the environment and further degradation may continue, with or without continued grazing or some other disturbance. If ecosystem condition was based solely on plant diversity and only a count of species numbers was used to determine plant diversity, this research would have falsely concluded that grazing and timing of grazing did not impact the condition of the ecosystem.     

Chemical extraction methods to assess bioavailable arsenic in soil and solid media

Soil ingestion by children is an important pathway in assessing public health risks associated with exposure to arsenic-contaminated soils. Soil chemical methods are available to extract various pools of soil arsenic, but their ability to measure bioavailable arsenic from soil ingestion is unknown. Arsenic extracted by five commonly used soil extractants was compared with bioavailable arsenic measured in vivo by immature swine (Sus scrofa) dosing trials. Fifteen contaminated soils that contained 233 to 17 500 mg kg(-1) arsenic were studied. Soil extractants were selected to dissolve surficially adsorbed and/or readily soluble arsenic (water, 1 M sodium acetate, 0.1 M Na2HPO4/0.1 M NaH2PO4) and arsenic in Fe and Mn oxide minerals (hydroxylamine hydrochloride, ammonium oxalate). The mean percent of total arsenic extracted was: ammonium oxalate (53.6%) > or = hydroxylamine hydrochloride (51.7%) > phosphate (10.5%), acetate (7.16%) > water (0.15%). The strongest relationship between arsenic determined by soil chemical extraction and in vivo bioavailable arsenic was found for hydroxylamine hydrochloride extractant (r = 0.88, significant at the 0.01 probability level). Comparison of the amount of arsenic extracted by soil methods with bioavailable arsenic showed the following trend: ammonium oxalate, hydroxylamine hydrochloride > in vivo > phosphate, acetate > water. The amount of arsenic dissolved in the stomach (potentially bioavailable) is between surficially adsorbed (extracted by phosphate or acetate) and surficially adsorbed + nonsurficial forms in Fe and Mn oxides (extracted by hydroxylamine hydrochloride or ammonium oxalate). Soil extraction methods that dissolve some of the amorphous Fe, such as hydroxylamine hydrochloride, can be designed to provide closer estimates of bioavailable arsenic.     

Using fiber optics to detect moisture intrusion into a landfill cap consisting of a vegetative soil barrier

The intrusion of moisture into landfills can pose a health hazard because of the possibility that the moisture will carry harmful substances into the groundwater. Early detection of moisture anywhere within these landfills is essential if corrective action is to be taken well before an occurrence of this kind. This paper presents the results of a field-scale simulation test of the use of fiber optics to detect the presence of moisture within landfill covers, using a detection method based on the thermal response of soils as a function of their moisture content. By sending electrical current through an embedded stainless-steel tube, soils of varying moisture content were heated and time-dependent temperature measurements were obtained with a fiber-optic distributed temperature sensor system. The optical fiber itself lay within the tube, but its temperature was a function of how rapidly heat was conducted into the surrounding medium. The results of this experiment, which are in agreement with those obtained using more traditional "point" sampling and laboratory analysis, are presented along with the strengths and limitations of the thermal-response method of detecting moisture.     

Do vesicle cells of the red alga Asparagopsis (Falkenbergia stage) play a role in bromocarbon production?

The Rhodophyceae (red algae) are an established source of volatile halocarbons in the marine environment. Some species in the Bonnemaisoniaceae have been reported to contain large amounts of halogens in structures referred to as vesicle cells, suggesting involvement of these specialised cells in the production of halocarbons. We have investigated the role of vesicle cells in the accumulation and metabolism of bromide in an isolate of the red macroalga Asparagopsis (Falkenbergia stage), a species known to release bromocarbons. Studies of laboratory-cultivated alga, using light microscopy, revealed a requirement of bromide for both the maintenance and formation of vesicle cells. Incubation of the alga in culture media with bromide concentrations below 64 mgl(-1) (the concentration of Br(-) in seawater) resulted in a decrease in the proportion of vesicle cells to pericentral cells. The abundance of vesicle cells was correlated with bromide concentration below this level. Induction of vesicle cell formation in cultures of Falkenbergia occurred at concentrations as low as 8 mgl(-1), with the abundance of vesicle cells increasing with bromide concentration up to around 100 mgl(-1). Further studies revealed a positive correlation between the abundance of vesicle cells and dibromomethane and bromoform production. Interestingly, however, whilst dibromomethane production was stimulated by the presence of bromide in the culture media, bromoform release remained unaffected suggesting that the two compounds are formed by different mechanisms.     

Contribution of dissolved sulfates and sulfites in hydrogen sulfide emission from stagnant water bodies in Sri Lanka

Accumulation of sulfur-containing compounds and their bacterial mediated reductions have led to the emission of pungent odors from stagnant water bodies. This study is focused on the contribution of inorganic sulfur compounds in the emission of hydrogen sulfide. The measured dissolved oxygen levels have demonstrated good negative correlations with the dissolved sulfide levels implying the oxygen deficiency is the key for the reduction of sulfate ion and sulfite ion to sulfide ion. Particularly, the dissolved molar fractions of sulfide from the total dissolved sulfur compounds (sulfates, sulfites and sulfides) have a very good correlation with the dissolved oxygen for the stagnant water bodies except the artificially aerated prawn farms. For the stagnant water bodies with significant correlations, linear regressions are reported for them to be utilized in estimating one component of the regression from the measurement of the other. The measured data were further utilized to estimate the levels of hydrogen sulfide gas. The pH of the water bodies has confined much of the dissolved sulfides in the form of bisulfide ion and they can be easily escaped to the atmosphere upon acidification due to industrial discharges and/or acidic precipitations. The estimated levels of hydrogen sulfide just above the water surface were plotted for the most polluted stagnant water body in Sri Lanka for the pH range of 5-10 and temperature range of 25-35 degrees C.     

Soot sorption of non-ortho and ortho substituted PCBs

Field-observations of distribution coefficients well above expectations from bulk organic-matter partitioning for several chlorinated aromatic compound classes have lead to the hypothesis that enhanced affinity to soot may not be limited to polycyclic aromatic hydrocarbons but may extend as a significant process for a wider range of hydrophobic organic compounds. This suggestion was here tested in soot-column sorption experiments with a series of ortho- and non-ortho substituted polychlorinated biphenyls (PCBs), using diesel particulate matter (NIST standard reference material SRM-1650) as model soot sorbent. For congeners of similar hydrophobicity, considerably higher affinities toward the soot sorbent were observed for the non-ortho substituted PCBs. Mono- to tetra-ortho substituted PCBs exhibited log-based soot-water distribution coefficients (K(sc)) from 5.25 to 5.51 l/kg(sc) at solute concentrations corresponding to 1-13 microg/l. In contrast, biphenyl, mono- and dichloro- non-ortho substituted PCBs yielded logK(sc) values between 5.09 and 6.35 l/kg(sc). These results are 20-50, and 75-110 times higher, respectively, than the corresponding K(ow)-predicted K(oc) numbers. This strong interaction with soot, particularly of non-ortho substituted PCBs, may fundamentally affect their environmental distribution and bioavailable exposure.     

The interactions between plant growth,vegetation structure and soil processes in semi-natural acidic and calcareous grasslands receiving long-term inputs of simulated pollutant nitrogen deposition

Regular applications of ammonium nitrate (35-140 kg N ha(-1) year(-1)) and ammonium sulphate (140 kg N ha(-1) year(-1)) to areas of acidic and calcareous grassland in the Derbyshire Peak District over a period of 6 years, have resulted in significant losses in both overall plant cover, and the abundance of individual species, associated with clear and dose-related increases in shoot nitrogen content. No overall growth response to nitrogen treatment was seen at any stage in the experiment. Phosphorus additions to the calcareous plots did however lead to significant increases in plant cover and total biomass, indicative of phosphorus limitation in this system. Clear and dose-related increases in soil nitrogen mineralization rates were also obtained, consistent with marked effects of the nitrogen additions on soil processes. High nitrification rates were seen on the calcareous plots, and this process was associated with significant acidification of the 140 kg N ha(-1) year(-1) treatments.     

An automated wet deposition system to compare the effects of reduced and oxidised N on ombrotrophic bog species: Practical considerations

Critical N loads for ombrotrophic bogs, which often contain rare and N-sensitive plants (especially those in lower plant groups: lichens, mosses and liverworts), are based on very few experimental data from measured, low background N deposition areas. Additionally the relative effects of reduced versus oxidised N are largely unknown. This paper describes an automated field exposure system (30 km S. of Edinburgh, Scotland) for treating ombrotrophic bog vegetation with fine droplets of oxidised N (NaNO₃) and reduced N (NH₄Cl). Whim Moss exists in an area of low ambient N deposition (ca. 8 kg N ha^?1 y^?1), the sources and quantification of which are described. The wet N treatment system is run continuously, and is controlled/activated by wind speed and rainfall to provide a unique simulation of “real worl” treatment patterns (no rain=no treatment). Simulated precipitation is supplied at ionic concentrations below 4 mM in rainwater collected on site. Treatments provide a replicated dose response to 16, 32 and 64 kg N ha^?1 y^?1 adjusted for ambient deposition (8 kg N ha^?1 y^?1). The 16 and 64 kg N ha^?1 y^?1 are duplicated with a P+K supplement. Baseline soil chemistry and foliar nutrient status was established for all 44 plots for Calluna vulgaris, Sphagnum capillifolium, Hypnum jutlandicum and Cladonia portentosa.