Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

Effect of drying on leaching testing of treated municipal solid waste incineration APC-residues

Air-pollution-control (APC) residues from waste incinerators are hazardous waste according to European legislation and must be treated prior to landfilling. Batch and column leaching data determine which type of landfill can receive the treated APC-residues. CEN standards are prescribed for the batch and column leaching test; however, these standards do not specify whether or not the residue samples should be dried prior to the leaching testing. Laboratory tests were performed in parallel (dried/non-dried) on treated APC-residue samples and evaluated with respect to Cr, Cd, Cu, Pb and Zn leaching. The effect of drying of the wet APC-residue samples was particularly dramatic regarding the leaching of Cr. Drying resulted in 10-100 times more Cr leaching in both batch and columns test. Drying also affected the leaching of Cd, Cu and Pb. Initial Cd leaching was up to 100 times higher in column tests with dried APC-residue than in tests with wet residues. The effect of drying appeared to be a combination of decreasing the reduction capacity of the sample (Cr), decreasing pH (Cd, Cu) and in column tests also a wash-out of salts (probably affecting Cd and Pb). If the leaching tests are intended to mimic landfill conditions, the results of this paper suggest that the tests should be done on wet, non-dried residue samples, although this may be less practical than testing dried samples.     

DEVELOPMENT OF A BACTERIAL TRANSPORT MODEL FOR COARSE SOILS1

ABSTRACT: A bacterial transport model, developed to analyze bacterial translocation in coarse-grained soils, is presented. The complex governing equation is presented first, followed by analyses of each of the major processes influencing bacterial transport. These analyses suggest simplification of the governing equation is feasible when input data on specific processes are limited or unavailable. Model parameters, including bacterial die-off, bacterial distribution, input bacterial concentration, and saturated hydraulic conductivity, were randomly generated using a procedure known to produce either a normal or log-normal distribution of random numbers. Monte Carlo simulations were completed, and the resulting output was used to generate cumulative frequency distributions showing the probability of bacterial transport beyond various soil depths. Results from these simulations indicate that bacteria have a high probability of traveling through coarse-grained soils when low clay content and soil water temperatures limit bacterial retention and die-off.     

Relatedness communicated in lemur scent

Lemurs are the most olfactory-oriented of primates, yet there is still only a basic level of understanding of what their scent marks communicate. We analyzed scent secretions from Milne-Edwards' sifakas (Propithecus edwardsi) collected in their natural habitat of Ranomafana National Park, Madagascar. We sought to test whether the scent mark could signal genetic relatedness in addition to species, sex, season, and individuality. We not only found correlations (r ²?=?0.38, P?=?0.017) between the total olfactory fingerprint and genetic relatedness but also between relatedness and specific components of the odor, despite the complex environmental signals from differences in diet and behavior in a natural setting. To the best of our knowledge, this is the first demonstration of an association between genetic relatedness and chemical communication in a wild primate population. Furthermore, we found a variety of compounds that were specific to each sex and each sampling period. This research shows that scent marks could act as a remote signal to avoid inbreeding, optimize mating opportunities, and potentially aid kin selection.     

Environmental assessment of waste incineration in a life-cycle-perspective (EASEWASTE).

A model for life-cycle assessment of waste incinerators is described and applied to a case study for illustrative purposes. As life-cycle thinking becomes more integrated into waste management, quantitative tools for assessing waste management technologies are needed. The presented model is a module in the life-cycle assessment model EASEWASTE. The module accounts for all uses of materials and energy and credits the incinerator for electricity and heat recovered. The energy recovered is defined by the user as a percentage of the energy produced, calculated on the lower heating value of the wet waste incinerated. Emissions are either process-specific (related to the amount of waste incinerated) or input-specific (related to the composition of the waste incinerated), while mass transfer to solid outputs are governed by transfer coefficients specified by the user. The waste input is defined by 48 material fractions and their chemical composition. The model was used to quantify the environmental performance of the incineration plant in Aarhus, Denmark before and after its upgrading in terms of improved flue gas cleaning and energy recovery. It demonstrated its usefulness in identifying the various processes and substances that contributed to environmental loadings as well as to environmental savings. The model was instrumental in demonstrating the importance of the energy recovery system not only for electricity but also heat from the incinerator.     

A new ceratopsian dinosaur from the Javelina Formation (Maastrichtian) of West Texas and implications for chasmosaurine phylogeny

Bravoceratops polyphemus gen. et sp. nov. is a large chasmosaurine ceratopsid from the lowermost part of the Javelina Formation (early Maastrichtian) of Big Bend National Park, TX, USA. B. polyphemus has a distinctive narrow snout, a long fenestrate frill, and a fan-shaped median parietal bar with a midline epiparietal on its posterior margin, as well as a symmetrical depression on its dorsal surface at the nexus of the parietal rami. This depression is interpreted to be the attachment point for a second midline epiparietal. This parietal morphology is distinct from that exhibited by Anchiceratops or Pentaceratops. The posterior midline epiparietal in B. polyphemus and its bifurcated quadratojugal–squamosal joint are features shared with the most derived chasmosaurines, Torosaurus and Triceratops. The combination of primitive and derived traits exhibited by B. polyphemus, and its stratigraphic position, is compatible with the gradual transition from basal, to intermediate, to derived chasmosaurines observed throughout the western interior of North America, and with phylogenetic analysis, which suggests that Bravoceratops may be closely related to Coahuilaceratops.