Effect of dilution rate on dynamic and steady-state biofilm characteristics during phenol biodegradation by immobilized Pseudomonas desmolyticum cells in a pulsed plate bioreactor

Continuous pulsed plate bioreactor (PPBR) was used for phenol biodegradation. Pseudomonas desmolyticum cells immobilized on granular activated carbon was used. Dynamic and steady state biofilm characteristics depend on dilution rate (DR). Lower DR favour phenol degradation and uniform, thick biofilm formation. Exo polymeric substance production in biofilm are favoured at lower dilution rates. Pulsed plate bioreactor (PPBR) is a biofilm reactor which has been proven to be very efficient in phenol biodegradation. The present paper reports the studies on the effect of dilution rate on the physical, chemical and morphological characteristics of biofilms formed by the cells of Pseudomonas desmolyticum on granular activated carbon (GAC) in PPBR during biodegradation of phenol. The percentage degradation of phenol decreased from 99% to 73% with an increase in dilution rate from 0.33 h?1 to 0.99 h?1 showing that residence time in the reactor governs the phenol removal efficiency rather than the external mass transfer limitations. Lower dilution rates favor higher production of biomass, extracellular polymeric substances (EPS) as well as the protein, carbohydrate and humic substances content of EPS. Increase in dilution rate leads to decrease in biofilm thickness, biofilm dry density, and attached dry biomass, transforming the biofilm from dense, smooth compact structure to a rough and patchy structure. Thus, the performance of PPBR in terms of dynamic and steady-state biofilm characteristics associated with phenol biodegradation is a strong function of dilution rate. Operation of PPBR at lower dilution rates is recommended for continuous biologic treatment of wastewaters for phenol removal.     

Microbial disinfection of water with endotoxin degradation by photocatalysis using Ag@TiO2 core shell nanoparticles

Environmental Science and Pollution Research - The studies on photocatalytic disinfection of water contaminated with Escherichia coli using Ag core and TiO2 shell (Ag@TiO2) nanoparticles under UV...     

Photocatalytic remediation of methylene blue and antibacterial activity study using Schiff base-Cu complexes

This work describes the design of novel Cu(II) complexes and their application in the photocatalytic degradation of methylene blue (MB). The same photocatalyst exhibits antibacterial activity against Escherichia coli (gram-negative) and Bacillus circulans (gram-positive). The characterisation of the photocatalysts has been done by several up-to-date physical methods. The rationale behind the photocatalysts’ beneficial intervention is discussed in this study. Statistical analysis of the degradation of MB is done using a one-way ANOVA, and the significance of means is determined by a multiple comparison test using Turkey HSD. Also, the degradation of MB follows pseudo first-order kinetics with high correlation coefficient values (R²?>?0.95), making them useful as simple and low-cost organic dye degradation agents.

     

Beryllium Concentrations in Ambient Air and Its Source Identification

Beryllium concentrations in atmospheric particulate and soil samples in and around a Beryllium Processing Facility (BPF) have been measured. The mean air concentration level of beryllium in and around the fence line of the BPF is 0.48 ± 0.43 ng m^-3 (n = 397) and is mostly influenced by diurnaland seasonal changes. The observed air concentration levelswere well below the prescribed ambient air quality (AAQ)standard of 10 ng m^-3. The soil concentration levels ofberyllium in the study area were found to be in the range of 1.42–2.75 g g^-1. The mass median aerodynamic diameter (MMAD)of beryllium aerosols in ambient air was found to be 6.9 m.Source identification using the Enrichment Factor (EF) approachindicates soil as the predominant contributory source for air concentrations at the site.     

Novel bacterial consortia isolated from plastic garbage processing areas demonstrated enhanced degradation for low density polyethylene

Environmental Science and Pollution Research - This study aimed to formulate novel microbial consortia isolated from plastic garbage processing areas and thereby devise an eco-friendly approach for...     

Solar photocatalysis for treatment of Acid Yellow-17 (AY-17) dye contaminated water using Ag@TiO2 core–shell structured nanoparticles

Wastewater released from textile industries causes water pollution, and it needs to be treated before discharge to the environment by cost effective technologies. Solar photocatalysis is a promising technology for the treatment of dye wastewater. The Ag@TiO₂ nanoparticles comprising of Ag core and TiO₂ shell (Ag@TiO₂) have unique photocatalytic property of inhibition of electron–hole recombination and visible light absorption, which makes it a promising photocatalyst for use in solar photocatalysis and with higher photocatalytic rate. Therefore, in the present work, the Ag@TiO₂ nanoparticles synthesized by one pot method with postcalcination step has been used for the degradation of Acid Yellow-17 (AY-17) dye under solar light irradiation. The Ag@TiO₂ nanoparticles were characterized using thermogravimetric–differential thermal analysis, X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and energy dispersive X-ray analysis. The catalyst has been found to be very effective in solar photocatalysis of AY-17, as compared to other catalysts. The effects of pH, catalyst loading, initial dye concentration, and oxidants on photocatalysis were also studied. The optimized parameters for degradation of AY-17 using Ag@TiO₂ were found to be pH?3, dye/catalyst ratio of 1:10 (g/g), and 2 g/L of (NH₄)₂S₂O₈ as oxidant. Efficient decolorization and mineralization of AY-17 was achieved. The kinetics of color, total organic carbon, and chemical oxygen demand removal followed the Langmuir–Hinshelwood model. Ag@TiO₂ catalyst can be reused thrice without much decline in efficiency. The catalyst exhibited its potential as economic photocatalyst for treatment of dye wastewater.     

Auto-combustion synthesis of narrow band-gap bismuth ferrite nanoparticles for solar photocatalysis to remediate azo dye containing water

Environmental Science and Pollution Research - Narrow band gap of ferrites makes it a good photocatalyst, and it plays very prominent role in the level of degradation of organic dyes by...     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Study of zooplankton emergence pattern and resting egg diversity of recently dried waterbodies in North Maharashtra Region

Seasonal patterns of temperature, pH, conductivity dissolved oxygen, phosphate and sulphate have been studied on the basis of physico-chemical characteristics of pond ecosystem. Importance of soil egg banks and their contribution to the diversity in freshwater ecosystem has been studied. We have focussed our attention on soil egg bank diversity and zooplankton emergence patterns of some recently dried aquatic habitats, comparing to that of neighbouring temporary pools with the permanent ponds. The emergence pattern from the soil egg bank followed an orderly succession from Protists-Rotifers and Crustaceans have been investigated. Dominant Protists emerged from the egg bank were Lacrymaria within rotifers. They were the first to emerge followed by Hexarthra blooms. The diversity of zooplankton in permanent ponds was significantly higher (i.e., 19) than the diversity in the ephemeral pools (i.e., 08). However; the zooplankton abundance in the ephemeral pools was higher with more than an order of magnitude, than that in ponds. Interestingly the number of species recorded in the egg bank was more than those present in the water columns of the pools. We have recorded 08 species of rotifera i.e. Lecane sp L curvicornis, L. bulla, K. quadrata, B. patulus, B. rubens, Branchionus calyciflorus, Testudinella sp which were not present in the neighboring permanent or ephemeral waterbodies during that period. Unequivocally suggest that in order to understand the zooplankton biodiversity; it is also important to evaluate the diversity of egg bank present in the sediment. A total 19 species were recorded including Copepoda 06 sp, Cladocera 05 sp and Rotifera 08 sp.