城市污水石灰法深度处理工艺中有毒物质的变化规律

分别采用7-乙氧基异酚恶唑酮．脱乙基酶（EROD）活性测定法，重组人激素受体基因的酵母测试和Q67发光菌试验方法，对北京市某生活污水处理厂的进水、二沉出水以及经过石灰法深度处理后的出水中的类二恶英物质、类雌激素物质和急性毒性物质进行了分析。进水中的三类生物毒性效应物质中的急性毒性物质，可通过活性污泥法基本去除，而对类雌激素物质和类二恶英物质的去除率分别为76％和52％。经过石灰沉淀法的深度处理后，可使上述两类物质的总去除率达到95％和68％。出水中的雌激素当量水平与欧洲国家污水处理厂出水水平相当，而类二恶英物质的总浓度低于美国EPA饮用水中二恶英的最大允许浓度。展示了生物毒性测试方法在排水生态风险和工艺评价方面的应用潜力。     

Quantitative structure-activity relationships for the inhibition toxicity to root elongation of Cucumis sativus of selected phenols and interspecies correlation with Tetrahymena pyriformis

The comparative toxicities of selected phenols to higher plants Cucumis sativus were measured and the negative logarithm molar concentration of the root elongation median inhibition (IRC50) were derived. Quantitative structure-activity relationships (QSARs) were developed to explore the toxicity influencing factors and for predictive purpose. The toxicity data, fell into two classes: polar narcosis and bio-reactive. For polar narcotic phenols, a highly significant two-parameter QSAR based on 1-octanol/water partition coefficient (logKow) and energy of the lowest unoccupied orbital (E(lumo)) was derived (IRC50 = 0.77 log Kow - 0.39E(lumo) + 2.36 n = 22 r2 = 0.89). The five bio-reactive chemicals proved to show elevated toxicity due to their typical substructure involved diverse reactive mechanisms. In an effort to model all chemicals, a robust multiple-variable QSAR combining logKow, E(lumo) and Qmax, the most negative net atomic charge, was developed (IRC50 = 0.65 logKow - 0.72E(lumo) + 0.23Qmax + 2.81 n = 27 r2 = 0.94), indicating that hydrophobicity, electrophilicity and hydrogen bond interaction contribute mainly to the phytotoxicity. The toxicological data was compared with Tetrahymena pyriformis 2-d population growth inhibition toxicity (IGC50) and excellent interspecies correlations were observed both for the polar narcotics and for five reactive chemicals (for polar narcotics: IRC50 = 0.95IGC50 + 1.07 n = 16 r2 = 0.89; for bio-reactive chemicals: IRC50 = 0.98IGC50 + 2.19 n = 5 r2 = 0.97; and for all: IRC50 = 0.93IGC50 + 1.63 n = 21 r2 = 0.87). This suggested that T pyriformis toxicity could serve as a surrogate of C. sativus toxicity for phenols and interspecies correlation also could be established for reactive chemicals.     

Monitoring cellular responses of engine-emitted particles by using a direct air-cell interface deposition technique

The impacts of ultrafine airborne particles generated by diesel or gasoline engines on human lung cells have been investigated using a new in vitro cellular exposure technique. This technique enables direct deposition of the gasoline engine exhaust particles (GEP) and diesel engine exhaust particles (DEP) on human lung cells located at the air-cell interface on a transwell membrane in an exposure apparatus. The cellular responses to particle exposure were measured by the levels of IL-8 chemokines produced as a function of exposure time. The findings suggest that GEP and high-sulfur DEP induced the production of similar levels of IL-8 by unprimed A549 cells. The level of IL-8 produced by unprimed A549 cells in response to low-sulfur DEP was found lower than that produced in response to high-sulfur DEP and GEP. When cells were primed, simulating predisposed conditions, significant levels of IL-8 were produced. GEP triggered a much higher level of IL-8 production than DEP did. Furthermore, the time profile of IL-8 production induced by GEP was markedly different from that induced by DEP. The findings indicate that GEP could induce the production of higher levels of chemokines (i.e., IL-8) than DEP did, implying that exposure to GEP could be a greater health risk than exposure to DEP.     

南京地区相对湿度对气溶胶含量的影响

为了研究南京地区相对湿度对气溶胶的影响,利用位于南京信息工程大学的拉曼-瑞利-米氏激光雷达,分析湿度廓线对消光系数的影响;利用2014年3月~2015年2月国控点环境监测数据对可吸入颗粒物浓度特征进行统计,并与相对湿度进行逐月和四季对比分析,并计算各参数之间的相关系数,以期为南京市的城市布局与规划、大气污染治理等提供更多参考.结果表明,低空气溶胶的消光系数廓线与相对湿度廓线变化趋势高度一致,地面相对湿度与可吸入颗粒物浓度在一定湿度范围（以不发生重力沉降为界限）内,相对湿度越大越有利于颗粒物的形成,超过这个范围,相对湿度越大,颗粒物浓度越低,在南京地区,对于PM₁₀来说,这个界限在40%~49%,对于PM_2.5来说,这个界限在50%~59%.     

Performance and fouling mechanism of direct contact membrane distillation (DCMD) treating fermentation wastewater with high organic concentrations

In this study,direct contact membrane distillation(DCMD)was used for treating fermentation wastewater with high organic concentrations.DCMD performance characteristics including permeate flux,permeate water quality as well as membrane fouling were investigated systematically.Experimental results showed that,after 12 hr DCMD,the feed wastewater was concentrated by about a factor of 3.7 on a volumetric basis,with the permeate flux decreasing from the initial 8.7 L/m~2/hr to the final 4.3 L/m~2/hr due to membrane fouling;the protein concentration in the feed wastewater was increased by about 3.5 times and achieved a value of 6178 mg/L,which is suitable for reutilization.Although COD and TOC in permeate water increased continuously due to the transfer of volatile components from wastewater,organic rejection of over 95%was achieved in wastewater.GC–MS results suggested that the fermentation wastewater contained 128kinds of organics,in which 14 organics dominated.After 12 hr DCMD,not only volatile organics including trimethyl pyrazine,2-acetyl pyrrole,phenethyl alcohol and phenylacetic acid,but also non-volatile dibutyl phthalate was detected in permeate water due to membrane wetting.FT-IR and SEM–EDS results indicated that the deposits formed on the membrane inner surface mainly consisted of Ca,Mg,and amine,carboxylic acid and aromatic groups.The fouled membrane could be recovered,as most of the deposits could be removed using a HCl/Na OH chemical cleaning method.     

测土配方施肥对油菜生产的影响——基于1 722份田间试验材料的经济学分析

论文基于1 722份田间试验数据,将氮、磷、钾肥的投入量和油菜的产出量分别折算为相应的具体投入值和产出值,首先,运用超越对数生产函数模型计算出各种化肥要素的边际产出,研究发现氮、磷、钾肥的投入对油菜产出值的作用大小存在一定差异,对油菜产出值的影响大小关系为氮肥>磷肥>钾肥,其中氮肥的产出弹性值为0.288 3,磷肥的产出弹性值为0.180 3,钾肥的产出弹性值为0.087 7。其次,继续探究氮、磷、钾肥在油菜生产中的相互关系,结果显示,氮肥替代弹性系数为-0.058 8,磷肥为0.120 9,钾肥为0.281 0。最后,测算出使油菜产出值最大的氮肥最佳投入值为951.20 元/hm²,最佳磷肥投入值为3 766.08 元/hm²,最佳钾肥投入值为621.32 元/hm²。     

综合生态安全格局构建与城市扩张模拟的城市增长边界划定——以天水市规划区（2015—2030年）为例

传统的城市增长边界划定方法,一般仅考虑生态安全格局,并未考虑在现有客观条件下的城市扩张趋势,划定结果具有一定的主观性;或仅对城市的扩张进行模拟,忽略了城市的生态安全问题。针对上述问题,论文通过耦合城市综合生态安全格局与基于CA_Markov模型的城市扩张模拟结果,提出了一种新的城市增长边界划定方法:首先,合理选取因子构建研究区的综合生态安全格局,利用禁建区对综合生态安全格局的结果进行修正,获得研究区的刚性增长边界;其次,合理选取城市扩张驱动因子,通过CA_Markov模型预测城市扩张边界;最后,综合考虑刚性增长边界、模拟获得的城市扩张边界及近期城市拓展方案等,获得最终的城市增长边界。并以天水市规划区（2015—2030）为案例,对方法的科学性进行了说明。结果表明,论文划定的城市增长边界内总面积370.56 km²,占规划区总面积的7.7%。此方法能够有效解决城市增长与生态保护之间的矛盾,对河谷型城市等建设用地匮乏、生态环境脆弱城市的增长边界划定具有良好的应用价值,也可为其他类型城市的城市增长边界划定提供参考。     

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

基于IVE模型和大数据分析的杭州市道路移动源主要温室气体排放清单研究

利用IVE模型和对杭州市机动车排放管理数据库大数据的分析,得到杭州市2015年各类机动车主要温室气体高分辨率排放清单,分析了排放分担情况及时间变化特征,并利用Arc GIS及杭州市路网信息建立了1 km×1 km网格化空间分布.结果表明,杭州市道路移动源温室气体排放中CO_2、CH_4和N_2O的年排放量分别为818.11×10~4、0.85×10~4和0.07×10~4t,合计856.79×10~4t(以CO2当量计).从温室气体种类来看,CO_2占道路移动源温室气体排放总量的绝大部分,为95.5%;从机动车类型来看,小微型客车对道路移动源温室气体排放的贡献率最大,占72.8%;从道路类型的排放情况来看,杭州市市中心、城区、城郊和郊区中温室气体合计CO_2当量贡献率最高的均为主干路,分别为43.4%、61.8%、58.0%和42.4%.杭州市道路移动源温室气体排放强度均呈现由城市中心向城市边缘递减的趋势,同时温室气体排放量日变化特征明显,均出现弱双峰现象.     

深圳市城区和郊区黑碳气溶胶对比研究

为了解深圳地区黑碳气溶胶（BC）的污染特征,使用深圳市西涌（XC）站点（郊区）和竹子林（ZZL）站点（城区）2014年1月1日~2015年6月30日测得的BC浓度及常规气象资料,对比研究了深圳地区两个不同代表性站点的BC变化特征.结果表明：在观测期间,郊区XC和城区ZZL站点BC小时平均浓度分别为（1.12±0.90）,（2.58±2.00）μg/m³,本底浓度分别为（0.27±1.31）,（1.07±0.85）μg/m³,气溶胶吸收系数σ_abs分别为（5.87±4.81）,（13.47±10.50） Mm^-1,城区站点值均高于郊区站点.两站点BC浓度分布均为对数正态分布,且都呈现干季高、湿季低的季节变化特点.日变化分析表明ZZL站点BC浓度呈现明显的双峰结构,XC站点日变化不明显.通过计算两地的气溶胶波长吸收指数AAE值,发现两地AAE值均接近1,说明两地BC污染主要来源于化石燃料的燃烧.进一步分析可知XC站点西北方向32km处是世界第三大集装箱码头,当西北风达到一定程度时（10~20m/s）,码头排放的污染物将严重影响XC站点的BC浓度.后向轨迹聚类分析结果表明,XC站点主要受中远距离输送影响,ZZL站点主要受周边及本地污染源排放影响.