The mobile source effect on curbside 1,3-butadiene,benzene, and particle-bound polycyclic aromatic hydrocarbons assessed at a tollbooth

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.-3 a.m.) with a mean of 2 microg/m3 (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.-9 a.m.) with a mean of 11.9 microg/m3 (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 microg/m3 (SD = 3.1, n = 7) to 22.3 microg/m3 (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m3. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest > 2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Matrix-immobilized organoclay for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Sorbent materials consisting of organoclay immobilized onto the surface of a solid support were evaluated for use in pentachlorophenol (PCP) and polycyclic aromatic hydrocarbon (PAH) remediation of groundwater at a creosote-contaminated Superfund site. Cetylpyridinium-exchanged low pH montmorillonite clay (CP-LPHM) was bonded to either sand (CP-LPHM/sand) or granular activated carbon (GAC) (CP-LPHM/GAC) using the free acid form of carboxymethylcellulose as an adhesive. Effluent from an oil-water separator was eluted through equal bed volumes of composite (4 g 3:2 CP-LPHM/GAC or 13 g CP-LPHM/sand), affinity-extracted, and quantitatively analyzed by GC/MS. PCP, naphthalene, fluorene, phenanthrene, pyrene, and total PAHs were initially reduced by both CP-LPHM/GAC (> or =99%, 61%, 99%, > or =99%, 97%, and 94%, respectively) and CP-LPHM/sand (90%, 70%, 94%, 95%, 93%, and 86%, respectively). Complete breakthrough of naphthalene occurred after approximately 15 h of elution through 3:2 CP-LPHM/GAC and 22 h through CP-LPHM/sand. PCP showed complete breakthrough following 18 h of elution through 3:2 CP-LPHM/GAC and 26 h through CP-LPHM/sand. However, 50% breakthrough was not attained for higher molecular weight PAHs, as fluoranthene, pyrene, benzo[a]anthracene, and chrysene continued to be greatly reduced with both 3:2 CP-LPHM/GAC (98%, 95%, 94%, and 95%, respectively) and CP-LPHM/sand (75%, 73%, 76%, and 78%, respectively) after 48 h of continuous elution. Results confirm prior studies, indicating that these organoclay-containing composites have a high capacity for contaminants found in wood preserving waste. Further, results suggest that the inclusion of CP-LPHM may be useful as part of an effective strategy for groundwater remediation of high concentrations of PCP and PAHs, in particular high molecular weight and carcinogenic PAHs.     

Risk aversion in hand-reared bananaquits

Summary To study risk aversion in hand-reared bananaquits (Coereba flaveola) we placed individuals in a cage with a 1 m² floral board having a random array of 85 yellow and 85 red artificial flowers. Flowers of one color were filled with the same quantity of nectar (constant flowers), whereas flowers of the other color were filled with variable quantities of nectar (variable flowers). The constant and variable flowers had identical mean contents, only their variances differed. After three presentations, the constant flowers were made variable and vice versa to control for color preferences. Naive foragers tended to avoid variable flowers. The degree of risk aversion was influenced by previous experience, the relative variability of the variable flowers, and flower color. Variable flowers having similar coefficients of variation, but different reward variables (volume or concentration) resulted in similar levels of risk aversion. Within single foraging episodes the following was observed: sequences of constant flowers increased while sequences of variable flowers remained similar to random foraging; the probability of revisiting a constant flower was higher than revisiting a variable flower; the average amount of nectar consumed from constant and variable flowers was similar within the assessment periods (prior to favoring constant flowers); the proportion of visits falling below the mean expected reward during the assessment period or its inverse (the proportion visited with at least the equivalent of the mean) may be a cue used for risk aversion; risk aversion persisted through long foraging bouts despite changed nectar distributions suggesting that the bananaquits did not track resource distributions well within foraging bouts.     

Environmental impact analysis: Its relevance for the U.K.'s extractive industries

The paper gives the background to the current debate in the U.K. concerning the possible need to introduce a standardised and perhaps mandatory system of environmental impact analysis for developmental proposals. This is shown to be a subject of very considerable interest to those concerned with mineral extraction and its environmental effects. The paper considers some of those features of the extractive industries which are of particular importance when selecting an approach to environmental assessment. It discusses the appropriate content for such a study. Attention is given to the socio-economic factors which are almost inevitably associated with the extractive industries. The paper concludes with a plea for a more systematic assessment of the potential impact of both new and continued extraction of raw materials and fossil fuels and suggests that there should be more emphasis on environmental issues when national, regional and local policies and plans for the extractive industries are prepared.     

Sperm competition in horseshoe crabs (Limulus polyphemus)

Male horseshoe crabs have two mating tactics. Some males come ashore attached to a female (clasping the posterior margin of the females' carapace with their modified pedipalps) and nest with her on the intertidal portion of the beach during the high tide. Other males come ashore unattached and crowd around nesting couples. Fertilization is external and unattached males that are in contact with a pair, i.e. satellite males, release sperm, so the assumption has been that they are fertilizing eggs. We conducted a paternity analysis to determine the proportion of eggs fertilized by attached and satellite males. Pairs with one satellite were observed during nesting on beaches in Florida and Delaware and their eggs were collected and reared to the late trilobite or first instar horseshoe crab stage. DNA was extracted from these offspring and from each adult (female, attached and satellite male) for use in paternity analysis. A Limulus-specific hypervariable microsatellite locus was identified and primers were constructed to amplify this locus via the polymerase chain reaction (PCR). Genotypes of putative parents and offspring were determined by resolving length variants of these PCR products on acrylamide gels. This allowed us to determine parentage of the offspring. We demonstrate that satellite males fertilized 40% of the eggs on average, attached males fertilized 51% and 4% of the eggs that were laid by the female were fathered neither by the attached male nor by the satellite (and 5% could not be determined unambiguously). There is high variability in the success of satellite males, ranging from 0 to 88%. Part of this variability can be explained by the position of the satellite relative to the attached male. We discuss the mechanics of fertilization and the possible advantages for multiple mating in this species.     

Driver speed selection on high-speed two-lane highways: Comparing speed profiles between uniform and differential speed limits

Objective: Although a considerable amount of prior research has investigated the impacts of speed limits on traffic safety and operations, much of this research, and nearly all of the research related to differential speed limits, has been specific to limited access freeways. The unique safety and operational issues on highways without access control create difficulty relating the conclusions from prior freeway-related speed limit research to 2-lane highways, particularly research on differential limits due to passing limitations and subsequent queuing. Therefore, the objective of this study was to assess differences in driver speed selection with respect to the posted speed limit on rural 2-lane highways, with a particular emphasis on the differences between uniform and differential speed limits.

Methods: Data were collected from nearly 59,000 vehicles across 320 sites in Montana and 4 neighboring states. Differences in mean speeds, 85th percentile speeds, and the standard deviation in speeds for free-flowing vehicles were examined across these sites using ordinary least squares regression models.

Results: Ultimately, the results of the analysis show that the mean speed, 85th percentile speed, and variability in travel speeds for free-flowing vehicles on 2-lane highways are generally lower at locations with uniform 65 mph speed limits, compared to locations with differential limits of 70 mph for cars and 60 mph for trucks.

Conclusions: In addition to posted speed limits, several site characteristics were shown to influence speed selection including shoulder widths, frequency of horizontal curves, percentage of the segment that included no passing zones, and hourly volumes. Differences in vehicle speed characteristics were also observed between states, indicating that speed selection may also be influenced by local factors, such as driver population or enforcement.     

Further Development of a Specific Conductivity Approach to Measure Groundwater Discharge Area within Lakes

Groundwater exchanges with most lakes are rarely quantified because there are many technical challenges to quantification. We investigated a lakebed mapping approach to infer the relative areas of groundwater exchange in 12 prairie shallow lakes and five Laurentian mixed forest shallow lakes in Minnesota, USA in 2011. We used a relatively common approach (seepage meters) to provide baseline information on the magnitude and direction of flow at four locations in each lake. To expand from point measurements to the whole‐lake scale, we explored use of specific conductivity as a cheaper and more time efficient proxy for groundwater discharge to lakes. We validated the approach at near shore stations in each lake where seepage meter measurements and specific conductivity surveys overlapped. Specific conductivity surveys provided a similar assessment of groundwater discharge compared to seepage meters for 50% of the lake‐sampling period combinations. The lakebed mapping approach, when validated for a lake with a limited number of seepage meter (or alternative methods) measurements, offers the advantages of being more time and labor efficient over the use of a similar number of seepage meter monitoring locations; seepage meters (or piezometers, for example) are costlier in terms of equipment and labor, even for single‐lake studies. We show the combined approach could provide useful baselines for understanding and mapping groundwater exchange in shallow lakes.     

Investigation of volatile methyl siloxanes in biogas and the ambient environment in a landfill

Landfill biogas is a potential alternative for fossil fuel,but the containing impurities,volatile methyl siloxanes(simplified as siloxanes),often cause serious problems in gas turbines when applied to generate electricity.In this research,a collecting and analyzing method based on solvent adsorption and purge and trap-gas chromatography-mass spectrometry was established to determine the siloxanes in biogas from a landfill in Jinan,China,and adjacent ambient samples,such as soil,air,and leachate of the landfill.The results showed that,octamethylcyclotetrasiloxane(D4) and decamethylcyclopentasiloxane(D5) accounted for 63% of total siloxanes;and without considering D4 and D5,the order of detected siloxanes in concentration was found relating to Gibbs free energies of molecules,namely that higher abundant siloxane(except for D4 and D5) usually had lower Gibbs free energy.Additionally,the mass ratio between D4 and octamethyltrisiloxane(L3) in the bio gas varied with different garbage age in landfills,possibly revealing the breaking-down of larger siloxane molecules with time.The samples,which were collected from environmental samples adjacent to the landfill,such as soil,water,and air,presented much higher siloxane level than urban or rural area away from landfills.The current H2 S scrubber of the landfill biogas could decrease the total siloxanes from 10.7 to 5.75 mg/m~3 due to Fe2 O3 and a refrigerant drier in a purification system and cyclic siloxanes were more easily removed than linear ones.