Soil dissipation of juvenile hormone analog insecticide pyriproxyfen and its effect on the bacterial community

This investigation was undertaken to examine the dissipation rate of pyriproxyfen as well as the change in the soil bacterial community. Residues of pyriproxyfen were measured using high performance liquid chromatography (HPLC) and the changes in bacterial community were determined by comparing the 16S rDNA bands on patterns by denaturing gradient gel electrophoresis (DGGE). The dissipation of pyriproxyfen was affected by both the concentration applied and incubation temperature. Lower concentrations (1 mg Kg(-1)) and higher incubation temperatures (30 and 40°C) showed more rapid dissipation rates. The population of microbial community decreased rapidly after incubation with 10 mg Kg(-1) of pyriproxyfen for 91 days, indicating the toxicity of pyriproxyfen toward bacterial communities in a closed soil ecosystem. Lower concentrations of pyriproxyfen showed less toxicity toward the microbial community. From cluster analysis, the structure of the bacterial community showed roughly a 60 % similarity throughout the experiment period in the control experiment, indicating the stability within soil microbiota without chemical agitation. However, the similarity was lower than 50 % both in the one and 10 mg Kg(-1) of insecticide pyriproxyfen spiked experiment, indicating the soil bacterial community changed after the insecticide pyriproxyfen was applied.     

Putting the “Ecology” into Environmental Flows: Ecological Dynamics and Demographic Modelling

There have been significant diversions of water from rivers and streams around the world; natural flow regimes have been perturbed by dams, barriers and excessive extractions. Many aspects of the ecological 'health' of riverine systems have declined due to changes in water flows, which has stimulated the development of thinking about the maintenance and restoration of these systems, which we refer to as environmental flow methodologies (EFMs). Most existing EFMs cannot deliver information on the population viability of species because they: (1) use habitat suitability as a proxy for population status; (2) use historical time series (usually of short duration) to forecast future conditions and flow sequences; (3) cannot, or do not, handle extreme flow events associated with climate variability; and (4) assume process stationarity for flow sequences, which means the past sequences are treated as good indicators of the future. These assumptions undermine the capacity of EFMs to properly represent risks associated with different flow management options; assumption (4) is untenable given most climate-change predictions. We discuss these concerns and advocate the use of demographic modelling as a more appropriate tool for linking population dynamics to flow regime change. A 'meta-species' approach to demographic modelling is discussed as a useful step from habitat based models towards modelling strategies grounded in ecological theory when limited data are available on flow-demographic relationships. Data requirements of demographic models will undoubtedly expose gaps in existing knowledge, but, in so doing, will strengthen future efforts to link changes in river flows with their ecological consequences.     

Effect of Biaxial Stretching on Thermal Properties, Shrinkage and Mechanical Properties of Poly (Lactic Acid) Films

This study produced poly (lactic acid) sheets using a biaxial stretching process, to investigate the effects of biaxial stretching on thermal properties, crystallinity, shrinkage and mechanical properties of PLA films. The results of differential scanning calorimetry show that the glass temperature peak of PLA films, which weakened after stretching. The cold crystallization peak of PLA films nearly disappeared at stretch ratios of 4 × 4 with a stretching rate above 50 %/s. The orientation and strain crystallization of PLA films were suppressed at stretching temperatures of approximately 100–110 °C. The shrinkage of PLA decreased proportionally to the stretch rate and inversely proportional to the stretching temperature, suggesting that the internal stresses frozen in the amorphous phase were an indication of a decrease in the crystallinity of the films, implying that PLA films would be best suited to low-shrinkage applications. The stress–strain of the PLA films increased considerably following the biaxial stretching process. In addition, PLA films exposed to hot water treatment show a slight decrease in stress values, probably attributable to a relaxation of the molecules, which have undergone orientation but failed to crystallize.     

Evaluation of biopolymer-modified concrete systems for disposal of cathode ray tube glass

Cathode ray tubes (CRTs) from computer monitors and television sets, which contain significantly high percentage of lead (Pb) by weight, represent an enormous and growing hazardous waste problem in the United States and worldwide. As a result, new technologies are needed to cope with current CRT waste stream and increased hazard and build new markets for its recycled components, developing commercially viable concrete composites, as well as minimizing CRT disposal problems. In this study, commercially available biopolymers, such as xanthan gum, guar gum, and chitosan, were used to encapsulate CRT glass waste, reducing the Pb leachability. The biopolymers utilized contain a number of useful functional groups, such as carboxyl (xanthan), hydroxyl (guar), and amino groups (chitosan), which play important roles in binding and stabilizing Pb onto concrete structures. The use of biopolymers in concrete systems can create a stable interpenetrating cross-linking composite that will last for many years. Results from these new composites show 30% higher compressive strength than standard concrete and a sharp decrease in lead leachability from several thousand milligrams per liter initially to an amount of three-tenths milligrams per liter or lower values (much lower than the U.S. Environment Protection Agency standard for hazardous waste of 5 mg/L by the toxicity characteristic leaching procedure test), and for some of the composites leachability is below even the standard for drinking water. This efficient and cost-effective CRT-biopolymer-concrete composite is a new class of biopolymer-modified material that can potentially perform a significant role in relieving the current CRT issue.     

Oxygen deficit determinations for a major river in eastern Hong Kong, China

Determination of oxygen deficit in the Hong Kong Shing-Mun River was based on the oxygen uptake by water, algal respiration and river sediment and the oxygen supplied to the river by surface reaeration and algal photosynthesis. A systematic study was conducted to examine the effect of water temperature, flow velocity and water depth on both the oxygen demands and the oxygen supplies. The oxygen budget of a water column in a selected section of the river was modeled. The results of the oxygen budget analysis showed that when water temperature was around 10 degrees C (the lowest temperature in the river), no deficit was observed. When water temperature was 10 degrees C to 20 degrees C, a small oxygen deficit appeared, especially in the deeper water. At the highest water temperature (30 degrees C), the oxygen deficit was maximal, -6.84 g O2/m2/day, in the night-time during the Spring tide period.     

Hydrometallurgical processing of Nd–Fe–B magnets for Nd purification

An evaluation of various metal purification processes subsequent to the leaching processing of the neodymium (Nd) product from neodymium–iron–boron (Nd–Fe–B) magnets has been conducted. These post-leaching purification processes included precipitation; replacement and electrolysis were studied in order to check the purity of the recovered neodymium. A hydrometallurgical investigation was adopted to digest the metal content of the scrap Nd–Fe–B magnets for the recovery of valuable Nd metal and other metals such as Fe, B, Co and Ni. The effect of leaching conditions such as solid-to-liquid ratio and temperature were optimized and 100 % Nd, 100 % Fe, 100 % B and 85.87 % Co leaching efficiencies were achieved under these conditions. The coating material of the magnet, Ni, achieved 50 % impregnation after increasing the reaction temperature to 70 °C. The metals present in the optimal leaching solution were recovered 99 % by pH adjustment. However, the replacement had the highest separation efficiency for the recovery of Nd metal. Further, the optimal leaching Nd–Fe–B solution was subjected to the electrolysis processes in order to verify the recovery efficiency for all metals.     

成组生物毒性测试法综合评价典型工业废水毒性

为了更加准确地评估典型工业废水的综合生物毒性以及处理工艺对废水毒性的削减情况,采用发光细菌急性毒性实验、大型溞急性毒性实验和单细胞凝胶电泳实验,结合潜在生态毒性效应探测(potential ecotoxic effects probe,PEEP)指数对常州市7种典型工业废水的综合生物毒性进行了评价。结果表明,7种工业原水都表现出了急性毒性或遗传毒性,综合生物毒性强度的排序为电子厂>电镀厂>综合污水处理厂>印染厂>化工厂>食品厂>制药厂。而7种工业废水的处理后出水综合生物毒性强度的排序为印染厂>化工厂>电子厂>综合污水处理厂>食品厂>制药厂>电镀厂。其中,印染和化工厂出水综合生物毒性高于原水,分别增加了43.3%和38.7%,PEEP评价结果显示分别属于剧毒和高毒,而电镀、电子、综合污水处理和食品厂出水的综合生物毒性削减明显,分别比原水削减了76.9%、53.1%、48.3%和26.6%,PEEP结果表明基本无毒。建立在成组生物毒性实验基础上的PEEP评价方法可全面反映工业废水的综合生物毒性,进而更客观地评价废水对水生态系统乃至人类健康的潜在影响。     

Self-contamination of aquaculture cages in shallow water

Fish farms, which initially colonized quiet and protected natural coastal areas, are now frequently installed in open flow zones, due to the lack of space along coasts and to the emergence of new environmental constraints. For the past two decades, a salmon fish farm has been located inside the roadstead of Cherbourg (France) to benefit from both sea protection and tide currents which regularly refresh the water. In spite of these favourable environmental conditions, periods of non-negligible fish mortalities have been observed to occur without clear evidence of their origin. This motivated the turbidity measurements and the numerical simulations presented in this paper. Firstly, it is shown that high turbidities in the farm site under study are mainly due to the flow acceleration under the cages, which causes the re-suspension of sediments and bio-deposits. Secondly, particles which enter the fishnet can have different origins (external source, bottom, or the net itself). Numerical simulations, based on the Reynolds equations and on the discrete random walk model for particle dispersion, suggest that the rear area of the net can be reached by particles emerging from below the net. It is observed that turbulent dispersion is a key ingredient for such a behaviour, as it can lead particles towards a large recirculation cell behind the net. Dispersion by realistic unsteady vortices has also been analysed by means of a Lattice-Boltzmann model. Though these computations involve smaller Reynolds numbers, they confirm qualitatively the observations of the random walk model. In addition, they suggest that vortex shedding and unsteady recirculation cells near the bottom can force particles from the sand bed to be lifted up and reach the rear of the net.     

APPLICATION OF THE U.S.G.S. DIFFUSION HYDRODYNAMIC MODEL FOR URBAN FLOODPLAIN ANAYSIS1

ABSTRACT: The two-dimensional Diffusion Hydrodynamic Model, DHM, is applied to the evaluation of floodplain depths resulting from an overflow of a leveed river. The environmental concerns of flood protection and high flow velocities can be better studied with the help of the two-dimensional DHM flow model than by use of the one-dimensional modeling techniques. In the test case, some of the predicted flood depth differences between the DHM and the one-dimensional approach (i.e., HEC-2) are found to be significant. Although the DHM generates considerable information, it is easy to use and does not require expertise beyond that required for use of the one-dimensional approaches.