MEASURING EVAPORATION WITH CERAMIC BELLANI PLATE ATMOMETERS1

ABSTRACT: Ceramic atmometers were tested to determine their usefulness for measuring evaporation in water resources applications. Field experiments were used to evaluate the precision, responsiveness to a range of potential evaporation conditions in a forested catchment, and interpretation of water loss of Bellani plate atmometers. The experiments, conducted from April to October in a warm, humid climate in the southeastern United States, indicate that atmometers can be reliable monitoring instruments for estimating potential evaporation. The small size, portability, low internal thermal mass, low cost, and ability to integrate the effect of radiation, air temperature, humidity and windspeed into one direct measurement of potential evaporation, make atmometers a useful instrument for certain water resources applications.     

Assessment of two thermally treated drill mud wastes for landfill containment applications.

Offshore oil and gas drilling operations generate significant amounts of drill mud waste, some of which is transported onshore for subsequent thermal treatment (i.e. via thermal remediation). This treatment process results in a mineral waste by-product (referred to as thermally treated drill mud waste; TTDMW). Bentonites are originally present in many of the drill mud products and it is hypothesized that TTDMW can be utilized in landfill containment applications (i.e. cover or base liner). The objective of this paper is to examine the feasibility of this application by performing various physical and chemical tests on two TTDMW samples. It is shown that the two TTDMW samples contained relatively small amounts of clay-sized minerals although hydraulic conductivity values are found to be less than 10(-8) m/s. Organic carbon contents of the samples were approximately 2%. Mineralogy characterization of the samples confirmed varying amounts of smectite, however, peak friction angles for a TTDMW sample was greater than 36 degrees. Chemical characterization of the TTDMW samples show potential leaching of barium and small amounts of other heavy metals. Discussion is provided in the paper on suggestions to assist in overcoming regulatory issues associated with utilization of TTDMW in landfill containment applications.     

Uptake and elimination of perchlorate in eastern mosquitofish

The purpose of this study was to investigate the uptake and elimination of perchlorate in eastern mosquitofish (Gambusia holbrooki). Fish were exposed to 0.1-1000 mg/l sodium perchlorate for 12h, 1, 2, 5, 10, and 30 days, and perchlorate was determined in whole body extracts. Perchlorate was not detected in mosquitofish exposed to the low concentrations of perchlorate (0, 0.1, and 1mg/l sodium perchlorate), regardless of the exposure time, whereas it was detected when fish were exposed to 10, 100, and 1000 mg/l. The tissue concentrations were approximately 10 times less than that in the water. There was no difference in the uptake of perchlorate depending upon the exposure time, however, a difference in perchlorate uptake depending upon the concentration of the exposure dose (P<0.001) was observed. Uptake (K(u)) and elimination (K(e)) rate constants were 0.09 l/mg day and 0.70 day(-1), respectively. The half-life (T1/2) of perchlorate was 0.99 day. Thus, it appears that perchlorate is rapidly taken up and eliminated in eastern mosquitofish. These results are critical and may be used to develop models of fate, effects, and transport of perchlorate in natural systems, as well as to assess ecological risk in affected ecosystems.     

Diel and tidal cycles regulate larval dynamics in salt marshes and mangrove forests

Variation in the release and recruitment of larvae of estuarine invertebrates affects the distribution and abundance of adults, as well as trophic interactions in both the plankton and the benthos. Larval release and supply are often timed to environmental cycles such as the diel and tidal cycles. Here, we determined using plankton tows whether the abundance of larvae spanning salt marsh and mangrove habitats across the intertidal landscape varied with diel and tidal cycles. Using three different sampling designs across two sites and within each of two estuaries over a 12-month period, we covered a range of spatial and temporal scales. This allowed us to test the general prediction that densities of meroplankton in the water column would be greater during nocturnal ebb tides than during other phases of the diel or tidal cycle. As predicted, nocturnal ebb tides yielded the highest densities of meroplanktonic larvae and were dominated by first-stage crab zoeae and this finding was most pronounced in the salt marsh. Throughout the course of the year, greater numbers of meroplankters consistently occurred during the ebb tide compared with the flood tide. The densities of other taxa (e.g. gastropods and polychaetes) showed no clear trends with diel or tidal cycles. This study highlights the effects of these pervasive physical cycles on the timing of larval release and supply in the salt marsh–mangrove complex, and emphasises their contribution to the trophic interactions and the dynamics of benthic populations within estuaries.     

The behaviour of giant clams (Bivalvia: Cardiidae: Tridacninae)

Giant clams, the largest living bivalves, live in close association with coral reefs throughout the Indo-Pacific. These iconic invertebrates perform numerous important ecological roles as well as serve as flagship species—drawing attention to the ongoing destruction of coral reefs and their associated biodiversity. To date, no review of giant clams has focussed on their behaviour, yet this component of their autecology is critical to their life history and hence conservation. Almost 100 articles published between 1865 and 2014 include behavioural observations, and these have been collated and synthesised into five sections: spawning, locomotion, feeding, anti-predation, and stress responses. Even though the exact cues for spawning in the wild have yet to be elucidated, giant clams appear to display diel and lunar periodicities in reproduction, and for some species, peak breeding seasons have been established. Perhaps surprisingly, giant clams have considerable mobility, ranging from swimming and gliding as larvae to crawling in juveniles and adults. Chemotaxis and geotaxis have been established, but giant clams are not phototactic. At least one species exhibits clumping behaviour, which may enhance physical stabilisation, facilitate reproduction, or provide protection from predators. Giant clams undergo several shifts in their mode of acquiring nutrition; starting with a lecithotrophic and planktotrophic diet as larvae, switching to pedal feeding after metamorphosis followed by the transition to a dual mode of filter feeding and phototrophy once symbiosis with zooxanthellae (Symbiodinium spp.) is established. Because of their shell weight and/or byssal attachment, adult giant clams are unable to escape rapidly from threats using locomotion. Instead, they exhibit a suite of visually mediated anti-predation behaviours that include sudden contraction of the mantle, valve adduction, and squirting of water. Knowledge on the behaviour of giant clams will benefit conservation and restocking efforts and help fine-tune mariculture techniques. Understanding the repertoire of giant clam behaviours will also facilitate the prediction of threshold levels for sustainable exploitation as well as recovery rates of depleted clam populations.     

MBM fuel feeding system design and evaluation for FBG pilot plant

A biomass fuel feeding system has been designed, constructed and evaluated for a fluidized bed gasifier (FBG) pilot plant at the University of Saskatchewan (Saskatoon, SK, Canada). The system was designed for meat and bone meal (MBM) to be injected into the gasifier at a mass flow-rate range of 1-5 g/s. The designed system consists of two stages of screw conveyors, including a metering stage which controlled the flow-rate of fuel, a rotary airlock and an injection conveyor stage, which delivered that fuel at a consistent rate to the FBG. The rotary airlock which was placed between these conveyors, proved unable to maintain a pressure seal, thus the entire conveying system was sealed and pressurized. A pneumatic injection nozzle was also fabricated, tested and fitted to the end of the injection conveyor for direct injection and dispersal into the fluidized bed. The 150 mm metering screw conveyor was shown to effectively control the mass output rate of the system, across a fuel output range of 1-25 g/s, while the addition of the 50mm injection screw conveyor reduced the irregularity (error) of the system output rate from 47% to 15%. Although material plugging was found to be an issue in the inlet hopper to the injection conveyor, the addition of air sparging ports and a system to pulse air into those ports was found to successfully eliminate this issue. The addition of the pneumatic injection nozzle reduced the output irregularity further to 13%, with an air supply of 50 slpm as the minimum air supply to drive this injector. After commissioning of this final system to the FBG reactor, the injection nozzle was found to plug with char however, and was subsequently removed from the system. Final operation of the reactor continues satisfactorily with the two screw conveyors operating at matching pressure with the fluidized bed, with the output rate of the system estimated based on system characteristic equations, and confirmed by static weight measurements made before and after testing. The error rate by this method is reported to be approximately 10%, which is slightly better than the estimated error rate of 15% for the conveyor system. The reliability of this measurement prediction method relies upon the relative consistency of the physical properties of MBM with respect to its bulk density and feeding characteristics.     

Sex-specific patterns of lifetime reproductive success in single and repeat breeding steelhead trout (Oncorhynchus mykiss)

All other things being equal, the lifetime reproductive success (LRS) of iteroparous and semelparous individuals should scale with the number of breeding seasons. Deviations from this relationship may occur for many reasons, including age- or size-related fecundity or life history trade-offs, which may differ between sexes. We used 19 brood years of DNA parentage analysis in a small (N = 4–143 year⁻¹) wild, unexploited population of steelhead trout (Oncorhynchus mykiss) to compare the LRS of individuals that spawned only once [“one time spawners” (OTS), N = 355 male, 371 female] to those spawning twice [“repeat spawners” (RPS), N = 13 male, 49 female]. Female RPS had nearly twice the LRS of female OTS (1.17 offspring per female vs 0.91 offspring per female), whereas male RPS had nearly three times the LRS of male OTS (1.54 offspring per male vs 0.57 offspring per male). Female RPS produced slightly more adult offspring during their second breeding season than their first (0.78 vs 0.82 offspring per female); however, male RPS produced all of their adult offspring in their second breeding season (0 vs 1.54 offspring per male). The additional growth in body size of males between breeding seasons may give them an advantage in their second breeding season, but the lack of offspring produced in their first season suggests a trade-off between survival and future reproduction that was not expressed in females.     

The development and application of a multilevel decision analysis model for the remediation of contaminated groundwater under uncertainty

A study was initiated which combined elements of stochastic hydrology, risk assessment, simulation modeling, cost analysis and decision making to define the optimum remediation choice(s) for a Superfund site in the southern United States. The effort focused upon the premise that groundwater remediation is inherently complex due to uncertainties in the geological matrix as well as in contaminant concentrations at points of compliance and/or exposure. The technical analyst should supply the decision maker with estimates of these uncertainties as well as the cost penalties required to reduce them to manageable levels. Monte Carlo transport modeling was employed to define the probability of contaminant excursions from the site, while geostatistical simulation identified a joint plume configuration and its attendant probability. Bayesian modeling was used to define the worth of additional data. These individual components were combined within a Decision Model to identify optimum remediation configurations for a given levels of risk tolerance which could be supplied by the decision maker or affected community. Sensitivity analyses were conducted to define ranges over which the decision would not be affected by variation in the respective decision parameter.