Effects of Sorbent Injection on Participate Properties: Part I. Low-Temperature Sorbent Injection

Abstract

This article is the first of a two-part series dealing with the effects of sorbent injection processes on particulate properties. Part I reviews the effects on particulate properties of low-temperature sorbent injection processes (those processes that treat flue gas at temperatures near 300 °F). Part II reviews the effects on particulate properties of high-temperature sorbent injection processes (those processes that involve sorbent injection into the combustion or economizer sections of a boiler). In this article, we review what is currently known about the effects of the low-temperature sorbent injection processes on electrical resistivity, particulate mass loading, particulate size distribution, particulate morphology and cohesivity.

Mixtures of ash and sorbent produced by low-temperature sorbent injection processes are typically less cohesive than most types of fly ash. At temperatures within 30 °F of the water dew point, the combination of low cohesivity and low electrical resistivity of the ash and sorbent mixtures can cause electrical reentrainment in electrostatic precipitators. Deliquescent additives such as calcium chloride cause the water to be retained on the particle surface, thereby increasing cohesivity.

Sorbent injection has been reported to increase the particulate mass loading by a factor of 1.8 to 10, depending upon the reagent ratio and the coal sulfur content. Conventional and in-duct spray drying processes tend to shift the particle size distribution toward larger particles, while dry injection processes tend to shift the particle size distribution toward smaller particles.     

HPLC determination of chlorate metabolism in bovine ruminal fluid

Salmonella and Escherichia coli are two bacteria that are important causes of human and animal disease worldwide. Chlorate is converted in the cell to chlorite, which is lethal to these bacteria. An HPLC procedure was developed for the rapid analysis of chlorate (ClO₃ ^?), nitrate (NO₃ ^?), and nitrite (NO₂ ^?) ions in bovine ruminal fluid samples. Standard curves for chlorite, nitrite, nitrate, and chlorate were well defined linear curves with R² values of 0.99846, 0.99106, 0.99854, and 0.99138, respectively. Concentrations of chlorite could not be accurately determined in bovine ruminal fluid because chlorite reacts with or binds a component(s) or is reduced to chloride in bovine ruminal fluid resulting in low chlorite measurements. A standard curve ranging from 25 to 150 ppm ClO₃ ^? ion was used to measure chlorate fortified into ruminal fluid. The concentration of chlorate was more rapidly lowered (P < 0.01) under anaerobic compared to aerobic incubation conditions. Chlorate alone or chlorate supplemented with the reductants sodium lactate or glycerol were bactericidal in anaerobic incubations. In anaerobic culture, the addition of sodium formate to chlorate-fortified ruminal fluid appeared to decrease chlorate concentrations; however, formate also appeared to moderate the bactericidal effect of chlorate against E. coli. Addition of the reductants, glycerol or lactate, to chlorate-fortified ruminal fluid did not increase the killing of E. coli at 24 h, but may be useful when the reducing equivalents are limiting as in waste holding reservoirs or composting systems required for intense animal production.     

Soil Gas Methane at Petroleum Contaminated Sites: Forensic Determination of Origin and Source

Hydrocarbon vapors associated with spilled petroleum products arouse regulatory concern and can pose a significant health and safety risk. While petroleum products do not contain a significant amount of methane (CH 4 ), high CH 4 contents in soil gas near petroleum spills have been reported. While CH 4 is nontoxic, its accumulation in shallow soil gas represents a potential explosion and asphyxiation hazard, especially in confined spaces. Identifying the source and origin of shallow CH 4 accumulations is an important part of evaluating potential exposure pathways, selecting appropriate remedial measures, and determining environmental liability. This paper discusses the potential nature and anthropogenic sources for shallow CH 4 and how integration of geological, geochemical, and land use data can be used to determine its origin and identify its source. Two case studies are presented, one where CH 4 associated with a gasoline spill is shown to be derived from a natural source rather than the gasoline, and a second where CH 4 associated with spilled crude oil is shown to be produced in the vadose zone by biodegradation of the oil.     

Incorporating Variable Source Area Hydrology into a Spatially Distributed Direct Runoff Model1

Buchanan, Brian, Zachary M. Easton, Rebecca Schneider, and M. Todd Walter, 2011. Incorporating Variable Source Area Hydrology Into a Spatially Distributed Direct Runoff Model. Journal of the American Water Resources Association (JAWRA) 48(1): 43‐60. DOI: 10.1111/j.1752‐1688.2011.00594.x Abstract: Few hydrologic models simulate both variable source area (VSA) hydrology, and runoff‐routing at high enough spatial resolutions to capture fine‐scale hydrologic pathways connecting VSA to the stream network. This paper describes a geographic information system‐based operational model that simulates the spatio‐temporal dynamics of VSA runoff generation and distributed runoff‐routing, including through complex artificial drainage networks. The model combines the Natural Resource Conservation Service’s Curve Number (CN) equation for estimating storm runoff with the topographic index concept for predicting the locations of VSA and a runoff‐routing algorithm into a new spatially distributed direct hydrograph (SDDH) model (SDDH‐VSA). Using a small agricultural watershed in central New York, SDDH‐VSA results were compared to those from a SDDH model using the traditional land use assumptions for the CN (SDDH‐CN). The SDDH‐VSA model generally agreed better with observed discharge than the SDDH‐CN model (average, Nash‐Sutcliffe efficiency of 0.69 vs. 0.58, respectively) and resulted in more realistic spatial patterns of runoff‐generating areas. The SDDH approach did not correctly capture the timing of runoff from small storms in dry periods. Despite this type of limitation, SDDH‐VSA extends the applicability of the SDDH technique to VSA conditions, providing a basis for new tools to help identify critical management areas and assess water quality risks due to landscape alterations.     

Assessment of exposure to PCB 153 from breast feeding and normal food intake in individual children using a system approach model

Investigators have typically relied on a single or few discrete time points as measures of polychlorinated biphenyl (PCB) body burden, however health effects are more likely to be the result of integrative exposure in time, optionally expressed as an area under the time curve (AUC) of PCB serum concentration. Using data from a subgroup of 93 infants from a birth cohort in eastern Slovakia—a region highly polluted by PCBs—we fit a system type model, customized to our longitudinal measures of serum PCB concentrations in cord, 6, 16, and 45 month blood specimens. The most abundant congener, PCB 153, was chosen for modeling purposes. In addition to currently used methods of exposure assessment, our approach estimates a concentration time profile for each subject, taking into account mean residence time of PCB 153 molecules in the body, duration of breast feeding, hypothetical PCB 153 concentration in steady-state without breast feeding and alternately without normal food intake. Hypothetical PCB 153 concentration in steady-state without normal food intake correlates with AUC (r = 0.84, p < 0.001) as well as with duration of breast feeding (r = 0.64, p < 0.001). It makes possible to determine each subject’s exposure profile expressed as AUC of PCBs serum concentration with a minimum model parameters. PCB body burden in most infants was strongly associated with duration of breast feeding in most, but not all children, was apparent from model output.     

Contamination and bioaccumulation of benzotriazole ultraviolet stabilizers in fish from Manila Bay, the Philippines using an ultra-fast liquid chromatography-tandem mass spectrometry

Methyl methacrylate (MMA) is grafted on multiwalled carbon nanotubes (MWCNTs) by using N₂ plasma technique. The MMA grafted MWCNTs (MWCNT-g-pMMA) are characterized by using Raman spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis-differential thermal analysis (TGA-DTA), and potentiometric acid-base titration method. The application of MWCNT-g-pMMA in the removal of 4,4′-dichlorinated biphenyl (4,4′-DCB) from large volumes of aqueous solutions is investigated under ambient conditions. The results indicate that the adsorption of 4,4′-DCB on MWCNT-g-pMMA is much higher than that of 4,4′-DCB on MWCNTs, and the adsorbed 4,4′-DCB is difficult to be thermally decomposed from MWCNT-g-pMMA according to the TGA-DTA analysis. MWCNT-g-pMMA are suitable materials in the preconcentration and immobilization of polychlorinated biphenyls (PCBs) from large volumes of aqueous solutions in environmental pollution cleanup.     

How does coaching interviewees affect the validity of a structured interview?

Coaching interviewees to perform in employment interviews can influence the interview scores. We describe different types of coaching, emphasizing interventions designed to focus interviewees on core, interview‐relevant content and to help them convey the content accurately (as opposed to interventions designed to teach interviewees to manipulate their scores using peripheral means). We then study the effects of the former type of intervention in relation to the criterion‐related validity of a structured employment interview. In a combined sample of 146 public safety job incumbents, a predictive validation study was conducted using scores from a situational panel interview. Predictive validity and reliability was observed to be higher in a sample of coached interviewees compared to a sample of uncoached interviewees. Implications for future research and practice in organizational behavior are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Improved VOC bioremediation using a fluidized bed peat bioreactor

A gas–solid fluidized bed bioreactor was successfully used to treat air contaminated with a volatile organic compound (VOC). A bioreactor containing both a fluidized and packed bed of moist peat granules removed ethanol, a representative VOC, from an air stream. The fluidized bed operation mode of the bioreactor outperformed the packed bed mode. The maximum elimination capacity (EC) of ethanol in the fluidized mode was 1520 g m⁻³ h⁻¹, with removal efficiencies ranging between 45 and 100%, at loadings up to 3400 g m⁻³ h⁻¹. Maximum EC was 530 g m⁻³ h⁻¹ in the packed bed mode. Removal efficiency in the fluidized bioreactor was best at the lowest velocity, where the bubbling bed fluidization regime predominated. As gas velocity increased, the size and amount of large bubbles (slugs) increased and removal efficiency decreased while elimination capacity increased.     

Intermediate storage of carbon dioxide in geological formations: A technical perspective

Enhanced oil recovery (EOR) through CO₂ flooding has been practiced on a commercial basis for the last 35 years and continues today at several sites, currently injecting in total over 30 million tons of CO₂ annually. This practice is currently exclusively for economic gain, but can potentially contribute to the reduction of emissions of greenhouse gases provided it is implemented on a large scale. Optimal operations in distributing CO₂ to CO₂-EOR or enhanced gas recovery (EGR) projects (referred to here collectively as CO₂-EHR) on a large scale and long time span imply that intermediate storage of CO₂ in geological formations may be a key component. Intermediate storage is defined as the storage of CO₂ in geological media for a limited time span such that the CO₂ can be sufficiently reproduced for later use in CO₂-EHR. This paper investigates the technical aspects, key individual parameters and possibilities of intermediate storage of CO₂ in geological formations aiming at large scale implementation of carbon dioxide capture and storage (CCS) for deep emission reduction. The main parameters are thus the depth of injection and density, CO₂ flow and transport processes, storage mechanisms, reservoir heterogeneity, the presence of impurities, the type of the reservoirs and the duration of intermediate storage. Structural traps with no flow of formation water combined with proper injection planning such as gas-phase injection favour intermediate storage in deep saline aquifers. In depleted oil and gas fields, high permeability, homogeneous reservoirs with structural traps (e.g. anticlinal structures) are good candidates for intermediate CO₂ storage. Intuitively, depleted natural gas reservoirs can be potential candidates for intermediate storage of carbon dioxide due to similarity in storage characteristics.     

The anaerobic biodegradability of municipal sludge and fat, oil, and grease at mesophilic conditions.

The anaerobic biodegradability of municipal primary and secondary sludge with increasing levels of partially dewatered fat, oil, and grease (FOG) was assessed using a mixed methanogenic culture at 35 "C. Under batch conditions with an acclimated and enriched microbial population, the sludge loading was 3 kg volatile solids/m3 and the highest FOG loading tested was 1.5 kg volatile solids/m3, resulting in a methane yield of 245 mL methane/g sludge volatile solids added at 35 degrees C and 1010 mL methane/g FOG volatile solids added at 35 degrees C. Under semicontinuous feeding conditions, the sludge and sludge plus FOG loading tested were 3 and 3.75 kg volatile solids/m3-d, respectively. Within 23 days of operation, the volatile fatty acid concentrations were reduced below 200 mg chemical oxygen demand/L (187 mg/L as acetic acid). Enhancement of sludge digestion was observed in those reactors where codigestion of sludge and FOG took place, which was attributed to a higher level of microbial activity maintained in these reactors as a result of FOG degradation. The results of this study demonstrate that beneficial use of FOG through codigestion with municipal sludge is feasible.