Effect of the C:N:P ratio on the denitrifying dephosphatation in a sequencing batch biofilm reactor (SBBR)

A series of investigations were conducted using sequencing batch biofilm reactor(SBBR) to explore the influence of C:N:P ratio on biological dephosphatation including the denitrifying dephosphatation and the denitrification process.Biomass in the reactor occurred mainly in the form of a biofilm attached to completely submerged disks.Acetic acid was used as the source of organic carbon.C:N:P ratios have had a significant effect on the profiles of phosphate release and phosphate uptake and nitrogen removal.The highest rates of phosphate release and phosphate uptake were recorded at the C:N:P ratio of 140:70:7.The C:N ratio of 2.5:1 ensured complete denitrification.The highest rate of denitrification was achieved at the C:N:P ratio of 140:35:7.The increase of nitrogen load caused an increase in phosphates removal until a ratio C:N:P of 140:140:7.Bacteria of the biofilm exposed to alternate conditions of mixing and aeration exhibited enhanced intracellular accumulation of polyphosphates.Also,the structure of the biofilm encouraged anaerobic–aerobic as well as anoxic–anaerobic and absolutely anaerobic conditions in a SBBR.These heterogeneous conditions in the presence of nitrates may be a significant factor determining the promotion of denitrifying polyphosphate accumulating organism(DNPAO) development.     

Medium scale LNG-related experiments and CFD simulation of water curtain

This work is a continuation of the experimental research on LNG releases and their consequence mitigation methods, which has been carried on by the Mary Kay O’Connor Process Safety Center (MKOPSC) at the Texas A&M University since 2004.A series of medium scale experiments to test the ability of the water curtains to hold up and disperse a vapor has been performed. Colored smoke has been used as an analog of the LNG vapor for easier tracking of the vapor path through the water curtain. The results and some analysis of the experimental data are presented. The CFD software FLACS (GexCon AS) was used to simulate the effects of the water curtains on vapor dispersion. The results of the simulations were compared with experimental data.     

Economic and environmental effects of unilateral climate actions

Unilateral climate policy can be detrimental to global climate protection. Our objective is to provide insight into such a policy, to quantify the risk of carbon leakage, and to investigate the effects related to potential anti-leakage measures. We analyze existing definitions of carbon leakage and propose an alternative, rigorous one, which is different in three respects. The definition is then tested using computable general equilibrium analysis of the global economy and decomposition analysis. We identify a list of parameters that affect not only the magnitude but also the sign of the carbon leakage rate. Manipulating elasticities of substitution suggests that carbon leakage can be either positive or negative. Computable general equilibrium models, which are widely applied, including by the European Commission in this area, should be transparent, and their assumptions call for careful validation. We find that emission limits are properly distributed between sectors covered by the European Union Emissions Trading System and other sectors for the first commitment period (ended in 2012) but not for the second one (ending in 2020), where the target for the non-trading sectors should be reduced relative to the target for the trading sectors in order to equlize marginal abatement costs.     

Molecular population genetics of male and female mitochondrial genomes in subarctic Mytilus trossulus

The doubly uniparental inheritance system allows for the use of two independent mitochondrial genomes for population history investigations. Under this system, two lineages of mitochondrial DNA (mtDNA) exist and males are typically heteroplasmic, having the additional, usually divergent, mitochondrial genome inherited from their male parent. This additional mtDNA typically evolves faster, potentially allowing for insight into more recent events in population history. Few studies did explore this possibility in marine mussels Mytilus showing its usefulness. Recent observations of the Mytilus trossulus mussels who have retained their native mtDNA in European waters posed the question of their origin. Are they part of a population present, but previously undetected, or is this a potentially human mediated, ongoing spread of an invasive species? To tackle this question, we amplified with species-specific primers and sequenced an approximately 1,200-bp-long fragment spanning COIII and ND2 genes from both mitochondrial genomes of mussels sampled at five locations worldwide, covering the whole M. trossulus range. The overall pattern of polymorphisms is compatible with the entirely postglacial history of the whole species, indicating a very deep bottleneck at last glacial maximum, with possible retention of the whole species in a single refugium, and the effective population size of no more than a few thousands. Both analyses of molecular variance and isolation with migration (IM) models point at the West Atlantic as the source of the European M. trossulus mussels, at least the ones who retained their native mtDNA. The hypothesis that this is an ongoing, human-mediated process was considered. To this end, comparison with the well-known case: the introduction of congeneric mussel, Mytilus galloprovincialis, from Mediterranean Sea to Asia was used. This introduction occurred within the last 100 years. The results inferred by the IM model suggest that the timing and structure of transatlantic migration of M. trossulus differs significantly from the M. galloprovincialis case: it is more than 1,000 years old and involves a much larger fraction of the ancestral population. Therefore, most likely, this invasion is not a human-mediated process.     

Integrated assessment of agricultural policies with dynamic land use change modelling

With about half of its territory being farmed, agriculture is the main land use in the European Union (EU). As over 10% of the total EU manufacturing output comes from the agri-food sector, it also is an economic factor of great importance. Moreover, EU policy in this sector has far-reaching consequences ranging from the EU's status as a global trade partner to landscape preservation and development. The LUMOCAP Policy Support System is targeted towards policy makers in the European Commission (EC) and its Member States (MS) and aims to provide support in the field of sustainable agricultural and rural development. To this end it incorporates an integrated model with socio-economic and bio-physical processes, operating at different spatial scales. For supporting integrated assessment, a large number of policy levers is included as inputs for these models and outputs are transformed into policy-relevant social, economic and environmental indicators. The whole system is framed in a flexible, modular and easy to use software package that is useable for process experts and policy-analysts alike.This paper describes the integrated model, the individual models and a first calibration of the system. It demonstrates the system's behaviour for typical scenario runs and concludes with a reflection on the current status of the system and some recommendations for further development.     

Non-stationary electromagnetic field measurements accuracy improvement

Electromagnetic field (EMF) measurements, for labor safety and environment protection purposes, are performed in the near-field. Inaccuracy of the far-field EMF measurements oscillates around ±1 dB or bit worse; in the near-field measurements, errors at the level of ±6 dB must be sometimes accepted. In the case of non-stationary EMF measurements, their sense may be changed from quantitative to qualitative ones. In order to make it possible an estimation of the non-stationary EMF measurement accuracy, it is proposed new method of the meters calibration. The method is based upon a standard excitation with identical signal as the measured one. A set for the purpose includes a pulse generator (of frequency and pulse rating identical with the radiation source) and computer-controlled amplitude modulator that reflects the radiation pattern of an antenna (e.g. radar one) and its rotations. Contrary to calibration using monochromatic continuous wave (CW) excitation, proposed method should be repeated for any radiation source. The disadvantage is compensated by a possibility to estimate (additional) error of the method. Calculations show it at the level of 10%.     

Combining steam injection with hydraulic fracturing for the in situ remediation of the unsaturated zone of a fractured soil polluted by jet fuel

A steam injection pilot-scale experiment was performed on the unsaturated zone of a strongly heterogeneous fractured soil contaminated by jet fuel. Before the treatment, the soil was stimulated by creating sub-horizontal sand-filled hydraulic fractures at three depths. The steam was injected through one hydraulic fracture and gas/water/non-aqueous phase liquid (NAPL) was extracted from the remaining fractures by applying a vacuum to extraction wells. The injection strategy was designed to maximize the heat delivery over the entire cell (10 m × 10 m × 5 m). The soil temperature profile, the recovered NAPL, the extracted water, and the concentrations of volatile organic compounds (VOCs) in the gas phase were monitored during the field test. GC-MS chemical analyses of pre- and post-treatment soil samples allowed for the quantitative assessment of the remediation efficiency. The growth of the heat front followed the configuration of hydraulic fractures. The average concentration of total hydrocarbons (g/kg of soil) was reduced by ～ 43% in the upper target zone (depth = 1.5-3.9 m) and by ～ 72% over the entire zone (depth = 1.5-5.5 m). The total NAPL mass removal based on gas and liquid stream measurements and the free-NAPL product were almost 30% and 2%, respectively, of those estimated from chemical analyses of pre- and post-treatment soil samples. The dominant mechanisms of soil remediation was the vaporization of jet fuel compounds at temperatures lower than their normal boiling points (steam distillation) enhanced by the ventilation of porous matrix due to the forced convective flow of air. In addition, the significant reduction of the NAPL mass in the less-heated deeper zone may be attributed to the counter-current imbibition of condensed water from natural fractures into the porous matrix and the gravity drainage associated with seasonal fluctuations of the water table.