Anticipatory environmental policy impediments and opportunities

It is now generally recognised that much money and environmental damage can be saved if policies and decisions are geared to forestalling adverse environmental effects before they are implemented. This article looks at the arguments in favour of a more pro-active environmental policy regime, but cautions against too much optimism that it will occur quickly. There are a number of impediments in the way, mostly to do with separate implementing agencies, jealously guarded budgets and the sheer difficulty of persuading people to act ahead of scientific proof.     

Valuing water quality in China: purpose, approach and policy

１　Ｉｎｔｒｏｄｕｃｔｉｏｎ：ｈｅａｖｙｇｒｏｗｔｈａｎｄｌｉｇｈｔｒｅｇｕｌａｔｉｏｎ（ｔｈｅＴＶＩＥｓｅｃｔｏｒ）ＩｎＣｈｉｎａ,ａｓｉｎｍａｎｙｒａｐｉｄｌｙｄｅｖｅｌｏｐｉｎｇｃｏｕｎｔｒｉｅｓ,ｔｈｅｒｅａｒｅｒａｐｉｄｃｈａｎｇｅｓｉｎｔｈｅｅｎｖｉｒｏｎｍｅｎｔｏｃｃｕｒｒｉｎｇ．ＴｈｅｃａｓｅｏｆｗａｔｅｒｑｕａｌｉｔｙｉｓａｎｉｍｐｏｒｔａｎｔｏｎｅａｓＣｈｉｎａ○ｓｗａｔｅｒｑｕａｌｉｔｙｈａｓｄｅｔｅｒｉｏｒａｔｅｄｓｉｇｎｉｆｉｃａｎｔｌｙｓｉｎｃｅ１９８０ｕｎｄｅｒｔｈ…     

A CONSERVATION ASSESSMENT OF CENTRAL AMERICAN VEGETATION AND ECOREGIONS

Acomprehensive,standardized,andthematicallyappropriatemapofCentralAmericanvegetationandlandcovertypeswasdevelopedbyclassifyingtheremotesensedimagery(AVHRR)1km²     

Prenatal detection of chromosomal mosaicism

A significant problem associated with cytogenetic prenatal diagnosis is distinguishing between true and pseudomosaicism. This becomes a diagnostic dilemma when fetal mosaicism corresponds with a known clinical entity. True mosaicism reportedly occurs with a frequency of 0·2 per cent and pseudomosaicism in 0·7 per cent to 2·7 per cent of cases. In the past 12 months, our laboratory has completed 522 fetal karyotypes. Nine cases were found to demonstrate mosaicism, 4 true mosaics (0·8 per cent) and 6 pseudomosaics (1·1 per cent). One case demonstrated both true and pseudomosaicism. In all cases of true mosaicism, the pregnancy was continued and karyotypes completed at birth. Our results demonstrate a danger of rigid adherence to the criteria for true and pseudomosaicism in the examination of amniotic fluids. It is suggested that the criteria established for true and pseudomosaicism may not be valid when an aberrant cell line is found in a single flask and when that aberrant cell line is compatible with a known clinical entity due to a chromosome anomaly.     

Heavy metal binding capacity (HMBC) of municipal solid waste landfill leachates

This research describes the use of a toxicity assay for the identification of metal toxicity, bioavailability and heavy metal binding capacity (HMBC) of municipal solid waste (MSW) landfill leachates. MetPLATE, an assay specific for heavy metal toxicity, was used to determine the HMBC of MSW leachates collected from 14 sites in Florida, with a wide range of chemical and physical characteristics. The leachates displayed a low toxicity which was attributed to the site-specific parameters, including, high concentrations of both organic and inorganic ligands. The HMBC test was undertaken to measure the effect of these site-specific parameters on metal toxicity. The potential for MSW leachate to bind and, thus, detoxify heavy metals was investigated with copper, zinc, and mercury. The HMBC values obtained ranged from 3 to 115, 5 to 93 and 4 to 101 for HMBC-Cu+2, HMBC-Zn+2, and HMBC-Hg+2, respectively. Additionally, the high strength leachates displayed the highest binding capacities, although the landfills sampled represented a wide range of characteristics. For comparison, the HMBC values reported with local lake water, Lake Alice and Lake Beverly, and a wastewater treatment plant effluent were all below 3. A partial fractionation of MSW leachate samples from sites 1, 5 and 8, was conducted to further investigate the influence of selected site-specific physico-chemical parameters on metal binding. The fractionation revealed that the HMBC of the leachate samples was heavily influenced by the concentration of solids, organics and hardness.     

Protocol for early detection and evaluation of inhibitory wastewater using combined aerobic respirometric and anaerobic batch techniques.

Faced with the task of treating significant volumes of complex industrial wastewaters, the biological components of municipal wastewater treatment plants are operating under the risk of toxic or inhibitory contaminants from the industrial effluents that may be detrimental to their operation. This might lead to undesirable effluent toxicity and/or result in permit violations. Therefore, there is a need for upset early warning systems that can protect full-scale plants from toxic or inhibitory constituents in the incoming wastewaters. This study focused on the development of a protocol for rapid detection of potentially toxic inhibitory or toxic wastewaters using combined aerobic respirometric and anaerobic batch techniques. Aerobic respirometers equipped with automated data acquisition systems were used as potential early warning devices. The inhibition effect on carbon and nitrogen oxidation was assessed. The degree of inhibition was evaluated as the concentration causing 50% reduction in microbial activity, which was estimated by an inhibition model. Anaerobic toxicity assays were also conducted to evaluate the inhibitory effects of the toxic compounds to anaerobic inocula obtained from a master culture reactor fed with ethanol. The developed protocol for early detection of toxicity was validated using wastewater samples from a biotechnology industry and a food processing industry, and pure chemicals such as furfural and phenol. Varying degrees of sensitivity were observed in the study when different groups of microorganisms, wastewater samples, and chemicals were tested. The comparison of aerobic and anaerobic inhibition suggested the importance of using both aerobic and anaerobic cultures to maximize the necessary sensitivity of the protocol.     

Consistency of ozone and nitrogen oxides standards at tropospherically relevant mixing ratios

The absolute accuracy and long-term precision of atmospheric measurements hinge on the quality of the instrumentation and calibration standards. To assess the consistency of the ozone (O3) and nitrogen oxides (NO(x)) standards maintained at the National Institute of Standards and Technology (NIST), these standards were compared through the gas-phase titration of O3 with nitric oxide (NO). NO and O3 were monitored using chemiluminescence and UV absorption, respectively. Nitrogen dioxide (NO2) was monitored directly by laser-induced fluorescence and indirectly by catalytic conversion to NO, followed by chemiluminescence. The observed equivalent loss of both NO and O3 and the formation of NO2 in these experiments was within 1% on average over the range of 40-200 nmol mol(-1) of NO in excess O3, indicating that these instruments, when calibrated with the NIST O3 and NO standards and the NO2 permeation calibration system, are consistent to within 1% at tropospherically relevant mixing ratios of O3. Experiments conducted at higher initial NO mixing ratios or in excess NO are not in as good agreement. The largest discrepancies are associated with the chemiluminescence measurements. These results indicate the presence of systematic biases under these specific conditions. Prospects for improving these experiments are discussed.     

Stable chlorine intramolecular kinetic isotope effects from the abiotic dehydrochlorination of DDT

INTENTION, GOAL, SCOPE, BACKGROUND: Identifying different sources and following reaction pathways of chlorinated organic contaminants in the environment can be challenging, especially when only their concentrations are available. Compound-specific stable chlorine measurements of some contaminants have recently been shown to provide additional information and an increased understanding of their biogeochemistry. These studies, however, have been generally limited to volatile molecules. OBJECTIVE: Here, the stable chlorine isotope ratios of the semi-volatile pesticide, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) were investigated. Specifically, the intramolecular stable chlorine isotopic compositions of DDT and the kinetic isotope effect (KIE) for the abiotic dehydrochlorination of DDT to 2,2-bis(p-chlorophenyl)-1,1-dichloroethene (DDE) were determined. METHODS: Selective chemical oxidation of DDT to dichlorobenzophenone (DCBP) and analysis of each compound was used to calculate the stable chlorine isotope ratios of the alkyl and aromatic chlorines in DDT. To determine the KIE for dehydrochlorination, DDT was reacted in a basic solution to yield DDE at 52 degrees C, 60 degrees C, and 72 degrees C for 3, 5, and 5 days, respectively. RESULTS AND DISCUSSION: Significant intramolecular stable chlorine isotopic differences were observed in one sample of DDT where the alkyl and aromatic delta 37Cl values were -5.76 +/- 0.45 and -2.21 +/- 0.24%@1000, respectively. Dehydrochlorination of DDT to DDE in basic solutions at 52, 60, and 70 degrees C resulted in a substantial intramolecular KIE where the alkyl chlorines of DDE shifted by approximately 3%@1000 relative to the alkyl chlorines in DDT. However, no temperature dependence was observed. The KIE, calculated by an iterative program, was 1.009. CONCLUSIONS: Intramolecular differences in the stable chlorine isotope ratios were observed in DDT and this is the first such finding. Dehydrochlorination of DDT yields a measurable and distinct intramolecular stable chlorine KIE. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate the existence of significant intramolecular differences in chlorinated organic compounds. Many other chlorinated semi-volatile and volatile organic contaminants are synthesized from multiple sources of chlorine, and we recommend that similar studies be performed on many such molecules in order to attain a clear understanding of their intramolecular chlorine isotopic differences. The existence of a measurable KIE for the dehydrochlorination of DDT to DDE shows the potential strength of using isotopic measurements to investigate the biogeochemistry of these important compounds. For example, the isotopically depleted aqueous chloride produced by dehydrochlorination of DDT to DDE may be a useful tracer of these reactions in freshwater environments.     

Design unbiased estimation in line intersect sampling using segmented transects

In many applications of line intersect sampling, transects consist of multiple, connected segments in a prescribed configuration. The relationship between the transect configuration and the selection probability of a population element is illustrated and a consistent sampling protocol, applicable to populations composed of arbitrarily shaped elements, is proposed. It is shown that this protocol obviates the arbitrary practice of treating multiple intersections of a single particle as independent probabilistic events and preserves the design-unbiasedness of Kaisers (1983, Biometrics 39, 965–976) conditional and unconditional estimators, suitably generalized to segmented transect designs. The relative efficiency and utility of segmented transect designs are also discussed from a fixed population perspective.