Potential Methods for Managing Prymnesium parvum Blooms and Toxicity,With Emphasis on Clay and Barley Straw: A Review1

Hagström, Johannes A., Mario R. Sengco, and Tracy A. Villareal, 2010. Potential Methods for Managing Prymnesium parvum Blooms and Toxicity, With Emphasis on Clay and Barley Straw: A Review. Journal of the American Water Resources Association (JAWRA) 46(1):187-198. DOI: 10.1111/j.1752-1688.2009.00402.x Abstract: Harmful algal bloom (HAB) control and mitigation is a complex problem in ecosystem management. Phytoplankton play an important role in aquatic ecosystems as primary producers and food sources for many commercially important shellfish and there are limited options for targeting just a single species within the community. Chemical treatments (e.g., algaecides), rotting barley straw, nitrogen and phosphorus manipulation, and clay and/or flocculants are but a few techniques tested or used to reduce fish kills or shellfish contamination during a HAB event. Prymnesium parvum control has focused on the use of chemicals, nutrient manipulation, and clay flocculation. However, many HAB control methods have been rejected due to their effects on ecosystems, high costs, or limited effects on target organisms. For example, rotting barley straw (Hordeum vulgare) is considered to be an environmentally friendly alternative, but has been found to have very different results on the phytoplankton community depending on the dominating taxa and is ineffective against P. parvum and dinoflagellate blooms. Clay flocculation is a useful control/mitigation technique during fish kills in marine aquaculture sites in South Korea and can be effective in freshwater if the correct combination of clay and flocculent is used. Toxins produced by P. parvum and Karenia brevis also bind to phosphatic clay, thereby removing and/or neutralizing the toxins, but there is concern that the clay will have a negative effect on sessile organisms. Some shellfish suffer high mortalities and significant impacts on somatic and reproductive tissue growth at high clay loads; however, benthic communities appear to be unchanged after five years of clay treatment in South Korea. There are likely site-specific and ecosystem-specific characteristics that make generalizations about control options difficult and require careful assessment of options at each location.     

Variations in pesticide leaching related to land use, pesticide properties, and unsaturated zone thickness

Pesticide leaching through variably thick soils beneath agricultural fields in Morgan Creek, Maryland was simulated for water years 1995 to 2004 using LEACHM (Leaching Estimation and Chemistry Model). Fifteen individual models were constructed to simulate five depths and three crop rotations with associated pesticide applications. Unsaturated zone thickness averaged 4.7 m but reached a maximum of 18.7 m. Average annual recharge to ground water decreased from 15.9 to 11.1 cm as the unsaturated zone increased in thickness from 1 to 10 m. These point estimates of recharge are at the lower end of previously published values, which used methods that integrate over larger areas capturing focused recharge in the numerous detention ponds in the watershed. The total amount of applied and leached masses for five parent pesticide compounds and seven metabolites were estimated for the 32-km2 Morgan Creek watershed by associating each hectare to the closest one-dimensional model analog of model depth and crop rotation scenario as determined from land-use surveys. LEACHM parameters were set such that branched, serial, first-order decay of pesticides and metabolites was realistically simulated. Leaching is predicted to be greatest for shallow soils and for persistent compounds with low sorptivity. Based on simulation results, percent parent compounds leached within the watershed can be described by a regression model of the form e(-depth) (a ln t1/2-b ln K OC) where t1/2 is the degradation half-life in aerobic soils, K OC is the organic carbon normalized sorption coefficient, and a and b are fitted coefficients (R2 = 0.86, p value = 7 x 10(-9)).     

Pesticide fate and transport throughout unsaturated zones in five agricultural settings, USA

Pesticide transport through the unsaturated zone is a function of chemical and soil characteristics, application, and water recharge rate. The fate and transport of 82 pesticides and degradates were investigated at five different agricultural sites. Atrazine and metolachlor, as well as several of the degradates of atrazine, metolachlor, acetochlor, and alachlor, were frequently detected in soil water during the 2004 growing season, and degradates were generally more abundant than parent compounds. Metolachlor and atrazine were applied at a Nebraska site the same year as sampling, and focused recharge coupled with the short time since application resulted in their movement in the unsaturated zone 9 m below the surface. At other sites where the herbicides were applied 1 to 2 yr before sampling, only degradates were found in soil water. Transformations of herbicides were evident with depth and during the 4-mo sampling time and reflected the faster degradation of metolachlor oxanilic acid and persistence of metolachor ethanesulfonic acid. The fraction of metolachlor ethanesulfonic acid relative to metolachlor and metolachlor oxanilic acid increased from 0.3 to >0.9 at a site in Maryland where the unsaturated zone was 5 m deep and from 0.3 to 0.5 at the shallowest depth. The flux of pesticide degradates from the deepest sites to the shallow ground water was greatest (3.0-4.9 micromol m(-2) yr(-1)) where upland recharge or focused flow moved the most water through the unsaturated zone. Flux estimates based on estimated recharge rates and measured concentrations were in agreement with fluxes estimated using an unsaturated-zone computer model (LEACHM).     

Simulated fate and transport of metolachlor in the unsaturated zone, Maryland, USA

An unsaturated-zone transport model was used to examine the transport and fate of metolachlor applied to an agricultural site in Maryland, USA. The study site was instrumented to collect data on soil-water content, soil-water potential, ground water levels, major ions, pesticides, and nutrients from the unsaturated zone during 2002-2004. The data set was enhanced with site-specific information describing weather, soils, and agricultural practices. The Root Zone Water Quality Model was used to simulate physical, chemical, and biological processes occurring in the unsaturated zone. Model calibration to bromide tracer concentrations indicated flow occurred through the soil matrix. Simulated recharge rates were within the measured range of values. The pesticide transport model was calibrated to the intensive data collection period (2002-2004), and the calibrated model was then used to simulate the period 1984 through 2004 to examine the impact of sustained agricultural management practices on the concentrations of metolachlor and its degradates at the study site. Simulation results indicated that metolachlor degrades rapidly in the root zone but that the degradates are transported to depth in measurable quantities. Simulations indicated that degradate transport is strongly related to the duration of sustained use of metolachlor and the extent of biodegradation.     

Recent developments of safer formulations of agrochemicals

The primary objectives of formulation technology are to optimise the biological activity of the pesticide, and to give a product which is safe and convenient for use. However, because of the wide variety of pesticide active ingredients which are available, many different types of formulations have been developed depending mainly on the physico-chemical properties of the active ingredients. In the past most formulations were based on simple solutions in water (SL), emulsifiable concentrates in a petroleum-based solvent (EC), or dusts (DP) and wettable powders (WP). The presence of petroleum-based solvents in EC formulations and dusty powders in DP and WP formulations can lead to safety hazards in use and a negative impact on the envirnoment generally. Most government and regulatory authorities are now demanding formulations which are cleaner and safer for the user, have minimal impact on the environment, and can be applied at the lowest dose rate. Developments in formulation technology and novel formulation types, sometimes in special packaging such as water-soluble packs, can also give products a competitive advantage, add value or extend the lif-cycle of active ingredients. There is also a demand from government authorities and consumer groups to use safer formulation additives and adjuvants, and to minimise the residues of pesticides on food crops after spraying. All of these aspects are putting increasing pressure on the development of improved formulation and adjuvant technologies. Pesticide formulations for spray application and for seed treatment are discussed, along with developments in bioenchancement.     

Changes in persistent contaminant concentration and CYP1A1 protein expression in biopsy samples from northern bottlenose whales, Hyperoodon ampullatus, following the onset of nearby oil and gas development

A small population of endangered northern bottlenose whales (Hyperoodon ampullatus) inhabits "The Gully" a Marine Protected Area on the Scotian Shelf, eastern Canada. Amid concerns regarding nearby oil and gas development, we took 36 skin and blubber biopsy samples in 1996-1997 (prior to major development) and 2002-2003 (five years after development began), and three samples from a population in the Davis Strait, Labrador in 2003. These were analysed for cytochrome P4501A1 (CYP1A1) protein expression (n=36), and for persistent contaminants (n=23). CYP1A1 showed generally low expression in whales from The Gully, but higher levels during 2003, potentially coincident with recorded oil spills, and higher levels in Davis Strait whales. A range of PCB congeners and organochlorine compounds were detected, with concentrations similar to other North Atlantic odontocetes. Concentrations were higher in whales from The Gully than from the Davis Strait, with significant increases in 4,4'-DDE and trans-nonachlor in 2002-2003 relative to 1996-1997.     

Providing the numerical context for British casualty reduction targets

The first national target for reducing road accident casualties in Great Britain was set in 1987, the target year being 2000. As the year 2000 approached, preparations were made for setting a subsequent target, the target year being 2010. A major part of the preparation consisted of forecasting the number of casualties that might be expected in 2010, conditional upon predictions about how the volume of road travel by the various transport modes might change and the type of new road safety measures that the Government might introduce. The forecasts provided the numerical context for the casualty reduction target that the Government announced in March 2000.This paper summarises the statistical analyses of accident data from 1983 to 1998 upon which the forecasts were based, and compares the approach with alternatives that have been adopted elsewhere. It also describes how progress towards the target has been monitored annually, allowing the Government to judge whether additional efforts might be needed to achieve the target. This examination of the actual data from 1999 to 2007 shows how far the original forecasts have proved to be successful.The improvement of car secondary safety over the past 15 years has probably been the development that has had the most significant effect on the national casualty total. A statistical model is used to quantify this effect by analysis of accident data, and the results of the most recent analyses are included.     

An empirical survey of the benefits of implementing pay for safety scheme (PFSS) in the Hong Kong construction industry

Introduction

The Government of the Hong Kong Special Administrative Region (SAR) has implemented different safety initiatives to improve the safety performance of the construction industry over the past decades. The Pay for Safety Scheme (PFSS), which is one of the effective safety measures launched by the government in 1996, has been widely adopted in the public works contracts. Both the accident rate and fatality rate of public sector projects have decreased noticeably over this period.

Method

This paper aims to review the current state of application of PFSS in Hong Kong, and attempts to identify and analyze the perceived benefits of PFSS in construction via an industry-wide empirical questionnaire survey. A total of 145 project participants who have gained abundant handson experience with the PFSS construction projects were requested to complete a survey questionnaire to indicate the relative importance of those benefits identified in relation to PFSS. The perceived benefits were measured and ranked from the perspectives of the client and contractor for crosscomparison.

Results

The survey findings suggested the most significant benefits derived from adopting PFSS were: (a) Increased safety training; (b) Enhanced safety awareness; (c) Encouragement of developing safety management system; and (d) Improved safety commitment. A wider application of PFSS should be advocated so as to achieve better safety performance within the construction industry.

Impact on Industry

It is recommended that a similar scheme to the PFSS currently adopted in Hong Kong may be developed for implementation in other regions or countries for international comparisons.     

Parental mosaic trisomy 21 detected following maternal cell contamination of an amniotic fluid specimen from a normal male pregnancy

We report a case of maternal mosaic trisomy 21 ascertained at prenatal diagnosis as a result of maternal cell contamination of an amniotic fluid sample. A 34 year old female was referred for karyotyping because of a previous trisomy 21 pregnancy. Chromosome analysis of primary in situ cultures showed a karyotype of 47,XX, + 21[6]/46,XY[32]/46,XX[2]. Molecular testing demonstrated maternal cell contamination of the amniotic fluid sample and G-banded karyotyping of maternal blood showed that 3/200 cells had trisomy 21, consistent with the mother being a Down syndrome mosaic. A normal male baby with a 46,XY chromosome complement was delivered at 30 weeks. This case emphasises the need for close collaboration between cytogenetic and molecular genetics laboratories in resolving unusual cases of mosaicism. Copyright © 2007 John Wiley & Sons, Ltd.