Product Guide/1982

Abstract

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH₄ gas was abated and lots of fine SiO₂ particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to cool it to the saturation temperature, allowing submicron particles to grow into micron sizes. The grown particles are then scrubbed efficiently in the venturi scrubber. Test results show that the present venturi scrubber system is effective for removing submicron particles. For SiO₂ particles greater than 0.1 μm, the removal efficiency is greater than 80–90%, depending on particle concentration. The corresponding pressure drop is relatively low. For example, the pressure drop of the venturi scrubber is ～15.4 ± 2.4 cm H₂O when the liquid-to-gas ratio is 1.50 L/m³. A theoretical calculation has been conducted to simulate particle growth process and the removal efficiency of the venturi scrubber. The theoretical results agree with the experimental data reasonably well when SiO₂ particle diameter is greater than 0.1 μm.     

Joint Impact of Scaling and Hysteresis on NAPL Flow Simulation

The hysteresis of capillary pressure versus saturation (P–S) relation is an important constitutive relation in multiphase flow, since the P–S relation is widely used to predict P–S relations in the simulation of the non-aqueous phase liquids (NAPLs). This work examined the performance of the scaling rule on predicting the P–S relationship and then studied the joint impact of the scaling and hysteresis on the multiphase NAPL flow simulation. Various experimental P–S values of distinct fluid pairs were compared with the scaled P–S curves using the scaling rule. The comparison indicated that the prediction of P–S is more accurate when the water–air P–S curve is used to scale other P–S curves. The joint impact of the scaling and hysteresis on the NAPLs flow simulation was then investigated by numerical simulation studies. The NAPL simulator was used to simulate the outcome of several scenarios based on a system with water–NAPL–air in a hypothetical sand tank. For both gasoline and trichloroethylene, the difference of the injected NAPL volume between no hysteretic and hysteretic simulations over a given time period was the smallest when the water–air P–S curve was used to scale other P–S curves. Simulation results of this study are valuable references for predicting the distribution of NAPLs.     

Seasonal variation of microbial populations and biomass in Tatachia grassland soils of Taiwan

To investigate the seasonal variations of microbial ecology in grassland of Tatachia forest, soil properties, microbial populations, microbial biomass, and 16S rDNA clone library analysis were determined. The soil had temperatures 6.6–18.4°C, pH 3.6–5.1, total organic carbon 1.11–10.68%, total nitrogen 0.18–0.78%, and C/N ratios 3.46–20.55. Each gram of dry soil contained bacteria, actinomycetes, fungi, cellulolytic, phosphate-solubilizing microbes, and nitrogen-fixing microbes 4.54 × 10⁴ to 3.79 × 10⁷, 3.43 × 10² to 2.17 × 10⁵, 5.74 × 10³ to 3.76 × 10⁶, 1.97 × 10³ to 1.34 × 10⁶, 8.49 × 10² to 5.59 × 10⁵, and 3.86 × 10² to 3.75 × 10⁵ CFU, respectively. Each gram of soil contained 117–2,482 μg of microbial biomass carbon, 23–216 μg of microbial biomass nitrogen and 9–29 μg of DNA. The microbial populations, microbial biomass, and DNA decreased stepwise with the depth of soil, and they had low values in winter seasons. The microbial populations, microbial biomass carbon, microbial biomass nitrogen, and DNA at the BW2 horizon were 8.42–17.84, 19.26–64.40, 16.84–61.11, and 31.03–46.26% of those at the O horizon, respectively. When analyzing 16S rDNA library, members of Proteobacteria, Acidobacteria, Actinobacteria, Bacteroidetes, Chloroflexi, Firmicutes, candidate division TM1, candidate division TM7, Gammatimonadetes, and Verrucomicrobia were identified. Members of Proteobacteria (44.4%) and Acidobacteria (33.3%) dominated the clone libraries. Within the phylum Proteobacteria, α-, β-, and γ-Proteobacteria were most numerous, followed by δ-Proteobacteria.     

运用生态工艺治理漆雾废气

本文阐述了运用生态工艺，成功地将工艺组成一套占地少、操作简便、外形美观的机械设备，治理了广元电子灯饰总厂的漆雾废气。治理后，其排放浓度，低于《四川省标准》的任一标准值。     

ASSESSING FLOOD MITIGATION ALTERNATIVES IN SHIJR AREA IN METROPOLITAN TAIPEI1

The Keelung River Basin in northern Taiwan lies immediately upstream of the Taipei metropolitan area. The Shijr area is in the lower basin and is subject to frequent flooding. This work applies micromanagement and source control, including widely distributed infiltration and detention/ retention runoff retarding measures, in the Wudu watershed above Shijr. A method is also developed that combines a genetic algorithm and a rainfall runoff model to optimize the spatial distribution of runoff retarding facilities. Downstream of Wudu in the Shijr area, five dredging schemes are considered. If 10‐year flood flows cannot be confined in the channel, then a levee embankment that corresponds to the respective runoff retarding scheme will be required. The minimum total cost is considered in the rule to select from the regional flood mitigation alternatives. The results of this study reveal that runoff retarding facilities installed in the upper and middle parts of the watershed are most effective in reducing the flood peak. Moreover, as the cost of acquiring land for the levee embankment increases, installing runoff retarding measures in the upper portion of the watershed becomes more economical.     

Evaluation of the emission characteristics of PCDD/Fs from electric arc furnaces

Distribution of PCDD/F (polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran) congeners at two electric arc furnaces (EAFs) in Taiwan is evaluated via intensive stack sampling and analysis. Two kinds of exhaust system in EAFs including stack system and shutter system are selected for measuring dioxin emissions. In addition, dioxin emissions during oxidation and reduction stages at EAF-A were characterized. Results indicate that the PCDD/F concentration of stack gas in EAF-A was 4.39 ng/N m³ while total Toxic Equivalent Quantity (TEQ) concentration was 0.35 ng I-TEQ/N m³. The PCDD/F concentration of stack gas in EAF-B was 2.20 ng/N m³ and the TEQ concentration was 0.14 ng I-TEQ/N m³. 1,2,3,4,6,7,8-H_pCDF, OCDD and OCDF are the major contributors of the dioxin concentrations for two EAFs investigated and the percentage of PCDD/F in particulate phase increases as the chlorination level of the PCDD/F congener increases. The results obtained on gas/particulate partitioning of PCDD/Fs in flue gases prior to the APCD in EAFs indicate that more than 90% exists in particulate phase. In EAF-A, the PCDD/F concentration during oxidation stage is slightly higher than that measured during reduction stage, including the sampling points of CO converter outlet, prior to bag filter and stack. Majority of PCDD/Fs emitted from steel-making processes exists in particulate-phase (about 60–70%) at both EAFs investigated.     

Deodorization of dimethyl sulfide using a discharge approach at room temperature

The traditional technologies for odor removal of thiol usually create either secondary pollution for scrubbing, adsorption, and absorption processes, or sulfur (S) poisoning for catalytic incineration. This study applied a laboratory-scale radio-frequency plasma reactor to destructive percentage-grade concentrations of odorous dimethyl sulfide (CH3SCH3, or DMS). Odor was diminished effectively via reforming DMS into mainly carbon disulfide (CS2) or sulfur dioxide (SO2). The removal efficiencies of DMS elevated significantly with a lower feeding concentration of DMS or a higher applied rf power. A greater inlet oxygen (O2)/DMS molar ratio slightly improved the removal efficiency. In an O2-free environment, DMS was converted primarily to CS2, methane (CH4), acetylene (C2H2), ethylene (C2H4), and hydrogen (H2), with traces of hydrogen sulfide (H2S), methyl mercaptan (CH3SH), and dimethyl disulfide. In an O2-containing environment, the species detected were SO2, CS2, carbonyl sulfide, carbon dioxide (CO2), CH4, C2H4, C2H2, H2, formaldehyde, and methanol. Differences in yield of products were functions of the amounts of added O2 and the applied power. This study provided useful information for gaining insight into the reaction pathways for the DMS dissociation and the formation of products in the plasmolysis and conversion processes.     

Restructured frame‐of‐reference training improves rating accuracy

The use of heuristic judgments is prevalent in organizations and negatively impacts accurate employee assessments. To minimize the negative impact of heuristic judgments (i.e., anchoring and adjustment), we aim to improve rating accuracy by restructuring frame‐of‐reference (FOR) training. We conducted five studies (N = 1,143) using different samples (three including participants with hiring experience), training environments (onsite and online), and rating contexts (evaluations of sales representatives, teachers, contract negotiation specialists, and retail store managers). Across the five studies, the average improvement in rating accuracy was at least twice as large for restructured FOR (vs. control) training as it was for typical FOR (vs. control) training; the difference in rating accuracy between restructured and typical FOR training was statistically significant. Furthermore, minimizing the anchoring effect rather than increasing opportunities for rating adjustments improved rating accuracy (Study 4). Finally, restructured FOR training achieved higher criterion validity (i.e., a higher strength of the association between ratings regarding a target and the target's objective performance) than did typical FOR training (Studies 3 and 5). We discuss implications for improving the effectiveness of diverse training programs and the accuracy of judgments in organizations.     

Different mechanisms of extinction of conditioned taste aversion are dependent on time intervals of extinction following conditioning

After extinction, the reappearance of a conditioned response induced by an unconditioned stimulus which is weaker than that used during the conditioning training indicates that the extinction procedure does not eliminate the original conditioned memory. Recent studies on fear conditioning have shown that rats exhibited little or no recovery of conditioned responding if the time interval between fear acquisition and extinction was short, suggesting that the extinction process may erase the original conditioning trace in this situation. In the present study, a saving experiment was conducted in rats to investigate whether an aversive response could be recovered following extinction training with different time intervals after acquisition of conditioned taste aversion (CTA). Male Long–Evans rats developed CTA by associating a 0.2% sucrose solution with malaise induced by intraperitoneal injection of 4 ml/kg 0.15 M LiCl and were subjected to extinction training with an interval of 5 h (5H group) or 24 h (24H group) after acquisition of CTA. Rats in the 5H group, but not in the 24H group, exhibited no aversive responding to the sucrose solution followed by the injection of a lower dose of LiCl (1 ml/kg). These findings indicate that the extinction procedure administered at different time points following the acquisition of CTA affects recovery of extinguished aversive memory and suggest that an unlearning process may be involved in the mechanisms of CTA extinction with short intervals between acquisition and extinction.