Surface ozonation of polyvinyl chloride for its separation from waste plastic mixture by froth floatation

Selective surface modification of polyvinyl chloride (PVC) by ozonation was evaluated to facilitate the separation of PVC from other heavy plastics with almost the same density as PVC, especially polyethylene terephthalate (PET), by the froth flotation process. The optimum froth flotation conditions were investigated, and it was found that at 40°C, 90% of PVC and PET plastics floated. The bubble size became larger and the area covered with bubbles on the plastic surface was reduced with increasing temperature. Optimum PVC separation was achieved with the flotation solution at 40°C and mixing at 180–200 rpm, even for sheet samples 10 mm in size. Combined treatment by ozonation and froth flotation is a simple, effective, and inexpensive method for PVC separation from waste plastics.     

A study of the extraction of vanadium and nickel in oil-fired fly ash

Annual production of oil-fired fly ash in Taiwan is approximately 43 000 tons, of this approximately 13 000 tons is electrostatically precipitated, the rest is cyclonically collected. Structurewise, both consist of porous unburned carbon, vanadium and nickel oxide, and water-soluble sulfate. Electrostatically precipitated fly ash contains large amounts of ammonium sulfate. If these ashes are not properly disposed of, they become environmental problems, such as dusting, leakage of acid liquids, and pollution with heavy metals. This paper discusses the experimental extraction of vanadium and nickel from oil-fired fly ash. The results indicated that leaching of oil-fired fly ash in 0.5 N of sulfuric acid led to an extraction of 65% vanadium, 60% nickel, and 42% iron, along with an increase in the concentration of sulfuric acid. When leached in 2 N sodium hydroxide solution, the extraction of vanadium was 80%, and the extraction of nickel was negligible. If leached in an ammonia water, the extraction of nickel increased, along with an increase in the concentration of ammonia in water. When leached with 4 N ammonia water, the extraction of nickel was 60%, the extraction of vanadium was less than that obtainable from leaching in sulfuric acid solution or in sodium hydroxide solution. If electrostatically precipitated fly ash was leached in a solution of 0.25 N ammonia water and 2 N ammonium sulfate, it would yield an extraction of 60% nickel and 8% vanadium—leading to a selective extraction of nickel. This study has established an extraction flowsheet in which fly ash was first leached in an ammoniacal solution containing ammonium sulfate to recover nickel. The leached residues were then leached in an alkaline solution to recover vanadium.     

The implementation of a human factors engineering checklist for human–system interfaces upgrade in nuclear power plants

The primary purpose of this paper is to provide a human factors engineering (HFE) checklist for human–system interfaces (HSIs) upgrades in nuclear power plants (NPPs). The HFE checklist is used to review the HSIs design submittals prepared by licensees or applicants for a license or design certification of a HSI upgrade. NUREG-series regulation documents are used to develop the main frame of the initial HFE checklist. The contents of the HFE checklist are constructed by the theories and principles governing human factors. Then, verification and validation (V&V) of the HFE checklist is accomplished by validity and reliability evaluation. The results show that the HFE checklist has sufficient validity and reliability for the review of HSI upgrades in NPPs.     

The research on extracting the information of human errors in the main control room of nuclear power plants by using Performance Evaluation Matrix

Digitalized nuclear instruments and control systems have been the main stream design for the main control room (MCR) of advanced nuclear power plants (NPPs) nowadays. Digitalization of human–system interface (HSI) could improve human performance and, on the other hand, could reduce operators’ situation awareness as well. It might cause that humans make wrong decision during an emergency unintentionally. Besides, digital HSI relies on computers to integrate system information automatically instead of human operation. It has changed the operator’s role from mainly relating operational activity to mainly relating monitoring. However, if the operators omit or misjudge the information on the video display units and wide display panel, the error of omission and error of commission may occur. This study applies Content Category Analysis (CCA) and Performance Evaluation Matrix (PEM) methods to explore the potential problems in the MCR of advanced NPPs which are caused by human errors. The results show that the potential problems that would probably contribute to the human performance of MCR in the advanced NPPs are multiple accidents, pressure level, number of operators, and other factors such as working environmental. The conclusions of this research may be considered to avoid and prevent human errors in the human factor related researches especially in the nuclear safety field.     

Interactions between two introduced species: Zostera japonica (dwarf eelgrass) facilitates itself and reduces condition of Ruditapes philippinarum (Manila clam) on intertidal flats

Dwarf eelgrass (duckgrass; Zostera japonica) and Manila clams (Ruditapes philippinarum) are two introduced species that co-occur on intertidal flats of the northeast Pacific. Through factorial manipulation of clam (0, 62.5, 125 clams m⁻²) and eelgrass density (present, removed by hand, harrowed), we examined intra- and interspecific effects on performance, as well as modification of the physical environment. The presence of eelgrass reduced water flow by up to 40% and was also observed to retain water at low tide, which may ameliorate desiccation and explain why eelgrass grew faster in the presence of conspecifics (positive feedback). Although shell growth of small (20–50 mm) clams was not consistently affected by either treatment in this 2-month experiment, clam condition improved when eelgrass was removed. Reciprocally, clams at aquaculture densities had no effect on eelgrass growth, clam growth and condition, or porewater nutrients. Overall, only Z. japonica demonstrated strong population-level interactions. Interspecific results support an emerging paradigm that invasive marine ecosystem engineers often negatively affect infauna. Positive feedbacks for Z. japonica may characterize its intraspecific effects particularly at the stressful intertidal elevation of this study (+1 m above mean lower low water).     

Protected‐Area Boundaries as Filters of Plant Invasions

Abstract: Human land uses surrounding protected areas provide propagules for colonization of these areas by non‐native species, and corridors between protected‐area networks and drainage systems of rivers provide pathways for long‐distance dispersal of non‐native species. Nevertheless, the influence of protected‐area boundaries on colonization of protected areas by invasive non‐native species is unknown. We drew on a spatially explicit data set of more than 27,000 non‐native plant presence records for South Africa's Kruger National Park to examine the role of boundaries in preventing colonization of protected areas by non‐native species. The number of records of non‐native invasive plants declined rapidly beyond 1500 m inside the park; thus, we believe that the park boundary limited the spread of non‐native plants. The number of non‐native invasive plants inside the park was a function of the amount of water runoff, density of major roads, and the presence of natural vegetation outside the park. Of the types of human‐induced disturbance, only the density of major roads outside the protected area significantly increased the number of non‐native plant records. Our findings suggest that the probability of incursion of invasive plants into protected areas can be quantified reliably.