Photocatalytic degradation of methyl orange by a multi-layer rotating disk reactor

Introduction

Solar wastewater treatment based on photocatalytic reactions is a green process that utilizes renewable energy resources and minimizes secondary pollution. Reactor design plays an important role in promoting treatment efficiency and throughput density (based on unit volume of the reactor).

Experimental

A rotating disk reactor that significantly increases the process efficiency has been designed and evaluated for application to photocatalytic decomposition of dye pollutants in aqueous solutions. In this process, a novel multi-layer rotating disk reactor (MLRDR) was presented. Photocatalyst (TiO₂) particles are immobilized on the surfaces of disks. Within each layer of the reactor, methyl orange aqueous solution is allowed to flow from the center of the disk in a radial direction along the surface of the disk, which is rotating at high speed and is irradiated with UV lamps. The effluent is then directed to the center of another layer that lies underneath. Up to four stacked layers have been tested in this study, and the effects due to the number of the layers and volumetric flow rate on reaction conversion are investigated.

Results and discussion

The efficiency of this photocatalytic reactor exhibits complex dependence on these parameters. With selected operating conditions, conversions greater than 95% can be achieved within seconds of residence time. Design equations of the reactor have been derived based on fluid dynamics and kinetic models, and the simulation results show promising scale-up potential of the reactor.     

Combining bioaccumulation and coping mechanism to enhance long-term site-specific risk assessment for zinc susceptibility of bivalves

The purpose of this study is to conduct a long-term site-specific risk assessment for zinc (Zn) susceptibility of bivalves, green mussel Perna viridis and hard clam Ruditapes philippinarum, based on published experimental data by linking the biologically-based damage assessment model with the subcellular partitioning concept. A comprehensive risk modeling framework was developed to predict susceptibility probability of two bivalve species exposed to waterborne Zn. The results indicated that P. viridis accumulates more Zn toxicity, whereas both toxic potency and the recovery rate of Zn are higher for R. philippinarum. We found that negative linear correlations exist in elimination-recovery and elimination-detoxification relationships, whereas a positive linear correlation was observed in recovery-detoxification relationships for bivalves exposed to waterborne Zn. Simulation results showed that the spatial differences of susceptibility primarily resulted from the variation of waterborne Zn concentration under field conditions. We found that R. philippinarum is more susceptible of Zn than P. viridis under the same exposure condition. Results also suggested that Zn posed no significant susceptibility risk to two bivalve species in Taiwan. We suggested that these two species can be used to biomonitor the water quality on Taiwan coastal areas.     

Surface ozonation of polyvinyl chloride for its separation from waste plastic mixture by froth floatation

Selective surface modification of polyvinyl chloride (PVC) by ozonation was evaluated to facilitate the separation of PVC from other heavy plastics with almost the same density as PVC, especially polyethylene terephthalate (PET), by the froth flotation process. The optimum froth flotation conditions were investigated, and it was found that at 40°C, 90% of PVC and PET plastics floated. The bubble size became larger and the area covered with bubbles on the plastic surface was reduced with increasing temperature. Optimum PVC separation was achieved with the flotation solution at 40°C and mixing at 180–200 rpm, even for sheet samples 10 mm in size. Combined treatment by ozonation and froth flotation is a simple, effective, and inexpensive method for PVC separation from waste plastics.     

Ultrafine particles at three different sampling locations in Taiwan

Atmospheric ultrafine particles (UPs or PM_0.1) were investigated at the roadside of Syuefu road in Hsinchu city, in the Syueshan highway tunnel in Taipei and in the NTU Experimental Forest in Nantou, Taiwan. A SMPS (TSI 3936) and three MOUDIs (MSP 110) were collocated to determine the number and mass concentrations of the PM_0.1 simultaneously. The filter samples were further analyzed for organic carbon (OC), element carbon (EC), water-soluble ions and trace elements. Taking into account the OC artifact of PM_0.1, good chemical mass closure (ratio of the reconstructed chemical mass to the gravimetrical mass of PMs) was obtained with an unknown percentage of 10.6, 26.2 and 37.2% at the roadside, tunnel and forest, respectively. The unexplained mass was attributed to aerosol water in this study. The artifact at the roadside, tunnel and the forest PM_0.1 mass was found to be as high as 51.6 ± 10.7%, 20.0 ± 5.4% and 85.6 ± 18.4%, respectively. Finally, the effective density of the roadside, tunnel and forest PM_0.1 was calculated based on the results of chemical speciation and found to be 1.45, 1.29 and 1.22 g cm^?3, respectively, which was in good agreement with that obtained by using the method of Spencer et al. (2007). Based on these results, it is foreseeable that the number concentration of the SMPS can be converted using the effective density determined by Spencer et al. (2007) for the real time measurement of the PM_0.1 concentration.     

Association between fetal nuchal translucency thickness in first trimester and subsequent gestational hypertension and preeclampsia

Increased fetal nuchal translucency (NT) in the first trimester is associated with adverse pregnancy outcomes. Whether the increased NT is also associated with an increased frequency of pregnancy-associated hypertension (PAH) is not known. Seven hundred and seventy-nine pregnant women who received NT-based Down syndrome screening and delivered their babies at our hospital by September 2000 were enrolled into this study. Among these women, there are 46 cases of preeclampsia, 68 cases of gestational hypertension (GH); 665 women without any adverse pregnancy outcomes served as controls. Correlation analysis demonstrated that NT MoM (multiples of median) level had a positive association with maternal diastolic blood pressure at the time of admission for delivery (r = 0.104; p < 0.01). The severity of PAH was concordant with the stepwise increase of mean NT MoM level, which was 0.88 in control, 1.07 in gestational hypertension, and 1.13 in preeclampsia (p < 0.001). Using the 95th (1.52 MoM) and 90th (1.31 MoM) percentiles of NT thickness as cut-offs, the sensitivities and odds ratios of the women at risk for developing GH after 20 weeks of gestation were 8.8%, 19.1% and 1.98, 2.15 respectively, while for preeclampsia were 10.9%, 28.3% and 2.49, 3.58 respectively. It is concluded that the pathological changes in the placenta responsible for the development of PAH may also influence the physiological decrease of NT thickness in late first trimester. However, the sensitivity of fetal NT measurement in first trimester is not sufficient as a single marker for predicting the pregnant women at risk for subsequent PAH. Copyright © 2002 John Wiley & Sons, Ltd.     

Relationship between air pollution and daily mortality in a subtropical city: Taipei, Taiwan

Air pollution has been associated with daily mortality in numerous studies over the past decade. However most of these studies were conducted in the United States and Europe with relatively few done in Asia. In the current study, the association between ambient air pollution and daily mortality in Taipei, Taiwan's largest city which has a subtropical climate was undertaken, for the period 1994-1998 using a case-crossover analysis. This design is an alternative to Poisson time series regression for studying the short-term adverse health effects of air pollution. The air pollutants examined included particulate matter (PM(10)), sulfur dioxide (SO(2)), ozone (O(3)), nitrogen dioxide (NO(2)), and carbon monoxide (CO). The largest observed effect, which was without statistical significance, was seen for NO(2) and CO levels on deaths due to respiratory diseases (ORs=1.013 and 1.014, respectively). The well established link between air pollution levels and daily mortality may not be as strong in cities in subtropical areas, although other factors such as differences in pollutant mix or the underlying health of the population may explain the lack of a strong association in this study. Further studies of this type in cities with varying climates and cultures are needed.     

The research on extracting the information of human errors in the main control room of nuclear power plants by using Performance Evaluation Matrix

Digitalized nuclear instruments and control systems have been the main stream design for the main control room (MCR) of advanced nuclear power plants (NPPs) nowadays. Digitalization of human–system interface (HSI) could improve human performance and, on the other hand, could reduce operators’ situation awareness as well. It might cause that humans make wrong decision during an emergency unintentionally. Besides, digital HSI relies on computers to integrate system information automatically instead of human operation. It has changed the operator’s role from mainly relating operational activity to mainly relating monitoring. However, if the operators omit or misjudge the information on the video display units and wide display panel, the error of omission and error of commission may occur. This study applies Content Category Analysis (CCA) and Performance Evaluation Matrix (PEM) methods to explore the potential problems in the MCR of advanced NPPs which are caused by human errors. The results show that the potential problems that would probably contribute to the human performance of MCR in the advanced NPPs are multiple accidents, pressure level, number of operators, and other factors such as working environmental. The conclusions of this research may be considered to avoid and prevent human errors in the human factor related researches especially in the nuclear safety field.     

Assessing nitrate contamination and its potential health risk to Kinmen residents

Kinmen is located in the southwest of Mainland China. Groundwater supplies 50% of the domestic water use on the island. Residents of Kinmen drink groundwater over the long term because surface water resources are limited. Nitrate–N pollution is found and distributed primarily in the western part of groundwater aquifer whereas saline groundwater is distributed to the northeastern Kinmen. This work applied the DRASTIC model to construct the vulnerability map of Kinmen groundwater. MT3D was then used to evaluate the contamination potential of nitrate–N. The health risk associated with the ingestion of nitrate–N contaminated groundwater is also assessed. The results from DRASTIC model showed that the upland crop and grass land have high contamination potential, whereas the forest, reservoir and housing land have low contamination potential. The calibrated MT3D model inversely determined the high strength sources (0.09–2.74 kg/m²/year) of nitrate contaminant located in the west to the north west area and required 2–5 years travel time to reach the monitoring wells. Simulated results of MT3D also showed that both the continuous and instantaneous contaminant sources of nitrate–N release may cause serious to moderate nitrate contamination in the western Kinmen and jeopardize the domestic use of groundwater. The chronic health hazard quotient (HQ) associated with the potential non-carcinogenic risk of drinking nitrate–N contaminated groundwater showed that the assessed 95th percentile of HQ is 2.74, indicating that exposure to waterborne nitrate poses a potential non-cancer risk to the residents of the island. Corrective measures, including protecting groundwater recharge zones and reducing the number of agricultural and non-agricultural nitrogen sources that enters the aquifer, should be implemented especially in the western part of Kinmen to assure a sustainable use of groundwater resources.     

First detection of enteric adenoviruses genotype 41 in recreation spring areas of Taiwan

Environmental Science and Pollution Research - Human adenoviruses (HAdVs) are DNA viruses found in recreational water, such as water parks and swimming pools. Human adenovirus 41 (HAdV-41) is the...     

Tank-connected food waste disposer systems – Current status and potential improvements

An unconventional system for separate collection of food waste was investigated through evaluation of three full-scale systems in the city of Malmö, Sweden. Ground food waste is led to a separate settling tank where food waste sludge is collected regularly with a tank-vehicle. These tank-connected systems can be seen as a promising method for separate collection of food waste from both households and restaurants. Ground food waste collected from these systems is rich in fat and has a high methane potential when compared to food waste collected in conventional bag systems. The content of heavy metals is low. The concentrations of N-tot and P-tot in sludge collected from sedimentation tanks were on average 46.2 and 3.9 g/kg TS, equalling an estimated 0.48 and 0.05 kg N-tot and P-tot respectively per year and household connected to the food waste disposer system. Detergents in low concentrations can result in increased degradation rates and biogas production, while higher concentrations can result in temporary inhibition of methane production. Concentrations of COD and fat in effluent from full-scale tanks reached an average of 1068 mg/l and 149 mg/l respectively over the five month long evaluation period. Hydrolysis of the ground material is initiated between sludge collection occasions (30 days). Older food waste sludge increases the degradation rate and the risks of fugitive emissions of methane from tanks between collection occasions. Increased particle size decreases hydrolysis rate and could thus decrease losses of carbon and nutrients in the sewerage system, but further studies in full-scale systems are needed to confirm this.