Comparison between urban Toronto PM and selected materials: aerosol characterization using laser ablation/ionization mass spectrometry (LAMS)

Laser ablation/ionization mass spectrometry (LAMS) of particulate matter (PM) was undertaken on-line in order to extend and contrast PM characterization. Qualitative on-line LAMS results for certified materials and Toronto source materials demonstrated the versatility and limitations of the technique. The observation of organic and inorganic components of certified materials verified the proper working condition of the in-house on-line LAMS. Organic and inorganic components of Toronto source materials were also observed with the on-line LAMS. Common components identified from both types of materials were Na, Al, Ca, Fe, and K. Other recognized components were compared with marker elements reported for some common PM emission sources. An in-house off-line LAMS was used to analyze urban Toronto PM deposited on glass substrates, while the on-line LAMS analyzed individual urban Toronto PM particles that were introduced directly into the instrument. Scanning electron microscopy (SEM), X-ray spectrometry and inductively coupled plasma atomic emission spectrometry (ICP-AES) were used for confirmatory purposes. Organic and inorganic components of urban Toronto PM at their typical ng/m3 concentrations were successfully observed in mass spectra using both off-line LAMS and on-line LAMS. Identified ions unique to each analyzed material were compared to identified ions of urban Toronto PM. The ability of LAMS to analyze individual respirable PM particles (viz. < 2 microns), both for inorganic trace elements and for organic components, greatly extended our capability to characterize PM and also to achieve estimates of concentration contributions of each material.     

Decomposition of SF6 in an RF plasma environment

Sulfur hexafluoride (SFd)-contained gas is a common pollutant emitted during the etching process used in the semiconductor industry. This study demonstrated the application of radio-frequency (RF) plasma in the decomposition of SF6. The decomposition fraction of SF6 [etaSF6 (C(in)-C(out))/C(in) x 100%] and the mole fraction profile of the products were investigated as functions of input power and feed O2/SF6 ratio in an SiO2 reactor. The species detected in both SF6/Ar and SF6/O2/ Ar RF plasmas were SiF4, SO2, Fe2, SO2F2, SOF2, SOF4, S2F10, S2OF10, S2O2F10, and SF4. The results revealed that at 40 W, etaSF6 exceeded 99%, and the reaction products were almost all converted into stable compounds such as SiF4, SO2, and F2 with or without the addition of oxygen. Sulfur oxyfluorides such as SO2F2, SOF2, SOF4, S2OF10, and S2O2F10 were produced only below 40 W. The results of this work can be used to design a plasma/chemical system for online use in a series of a manufacturing process to treat SF6-containing exhaust gases.     

Evaluation on subcellular partitioning and biodynamics of pulse copper toxicity in tilapia reveals impacts of a major environmental disturbance

Fluctuation exposure of trace metal copper (Cu) is ubiquitous in aquatic environments. The purpose of this study was to investigate the impacts of chronically pulsed exposure on biodynamics and subcellular partitioning of Cu in freshwater tilapia (Oreochromis mossambicus). Long-term 28-day pulsed Cu exposure experiments were performed to explore subcellular partitioning and toxicokinetics/toxicodynamics of Cu in tilapia. Subcellular partitioning linking with a metal influx scheme was used to estimate detoxification and elimination rates. A biotic ligand model-based damage assessment model was used to take into account environmental effects and biological mechanisms of Cu toxicity. We demonstrated that the probability causing 50% of susceptibility risk in response to pulse Cu exposure in generic Taiwan aquaculture ponds was ~33% of Cu in adverse physiologically associated, metabolically active pool, implicating no significant susceptibility risk for tilapia. We suggest that our integrated ecotoxicological models linking chronic exposure measurements with subcellular partitioning can facilitate a risk assessment framework that provides a predictive tool for preventive susceptibility reduction strategies for freshwater fish exposed to pulse metal stressors.     

Analysis of polychlorinated dibenzo-p-dioxins and furans in various aqueous samples in Taiwan

Twenty-one fresh water samples were taken from reservoirs, wells and drinking water treatment plants in Taiwan for measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) concentrations. Due to low concentration of PCDD/Fs, water samples (400-1000 L) were collected by using the on-site large volume pre-concentration system and analyzed by high resolution gas chromatography (HRGC)/high resolution mass spectrometer (HRMS). Different characteristics of dioxin profiles in surface water and groundwater are observed. The PCDD/F concentrations in fresh water samples varied from 0.001 to 0.265 pg WHO₉₈-TEQ/L which are lower than the standard (12 pg WHO₉₈-TEQ/L) set by the Taiwan Environmental Protection Administration (TEPA) for drinking water. Only a small fraction (<5%) of the total PCDD/F concentration in fresh water samples was water-soluble. As a result of their hydrophobicity, PCDD/Fs are effectively removed along with suspended solid via the water treatment process (average 98% removal efficiency).     

Influence of sea-land breezes on the tempospatial distribution of atmospheric aerosols over coastal region

The influence of sea-land breezes (SLBs) on the spatial distribution and temporal variation of particulate matter (PM) in the atmosphere was investigated over coastal Taiwan. PM was simultaneously sampled at inland and offshore locations during three intensive sampling periods. The intensive PM sampling protocol was continuously conducted over a 48-hr period. During this time, PM2.5 and PM(2.5-10) (PM with aerodynamic diameters < 2.5 microm and between 2.5 and 10 microm, respectively) were simultaneously measured with dichotomous samplers at four sites (two inland and two offshore sites) and PM10 (PM with aerodynamic diameters < or =10 microm) was measured with beta-ray monitors at these same 4 sites and at 10 sites of the Taiwan Air Quality Monitoring Network. PM sampling on a mobile air quality monitoring boat was further conducted along the coastline to collect offshore PM using a beta-ray monitor and a dichotomous sampler. Data obtained from the inland sites (n=12) and offshore sites (n=2) were applied to plot the PM10 concentration contour using Surfer software. This study also used a three-dimensional meteorological model (Pennsylvania State University/National Center for Atmospheric Research Meteorological Model 5) and the Comprehensive Air Quality Model with Extensions to simulate surface wind fields and spatial distribution of PM10 over the coastal region during the intensive sampling periods. Spatial distribution of PM10 concentration was further used in investigating the influence of SLBs on the transport of PM10 over the coastal region. Field measurement and model simulation results showed that PM10 was transported back and forth across the coastline. In particular, a high PM10 concentration was observed at the inland sites during the day because of sea breezes, whereas a high PM10 concentration was detected offshore at night because of land breezes. This study revealed that the accumulation of PM in the near-ocean region because of SLBs influenced the tempospatial distribution of PM10 over the coastal region.     

Characterization and Properties of Reactive Poly (Lactic Acid)/Ethylene–Vinyl Alcohol Copolymer Blends with Chain-Extender

A hydrophilic copolymer, ethylene–vinyl alcohol (EVOH), was incorporated into the poly(lactic acid) (PLA) matrix to improve the barrier property of PLA through twin-screw extrusion rather than the typical coextrusion process. A chain extender, poly[(ethylene)-co-(methyl acrylate)-co-(glycidyl methacrylate)] (PEMG), was used to reduce the probability of the thermal degradation of PLA during melt compounding. Biaxial stretching was used to enhance the microstructure and barrier property of PLA-PEMG/EVOH films. Experimentally, PEMG considerably reduced the probability of the thermal degradation of the PLA-PEMG sample. Biaxial stretching increased the tensile strength and decreased the value of elongation at break of the PLA-PEMG/EVOH80 (PLA/EVOH 100/80) film. Because of the efficient blending of PLA/EVOH in the twin-screw extruder, the dispersion of EVOH in the PLA matrix revealed homogeneous dispersion with a domain size of 1–5 μm. EVOH effectively improved the water vapour transmission rate (WVTR) of PLA through melt blending. Blending PLA-PEMG with EVOH substantially decreased the WVTR from 250 cc—20 μm/m²-day-atm for neat PLA to approximately 65 cc—20 μm/m²-day-atm for the PLA-PEMG/EVOH80 film, a decrease of approximately 74 % compared with neat PLA. Moreover, the WVTR decreased further from 65 cc—20 μm/m²-day-atm for the unstretched PLA-PEMG/EVOH80 film to 6.3 cc—20 μm/m²-day-atm for the film stretched at a stretch ratio of 3.5 × 3.5 and at 100 %/s, a decrease of approximately 90 % compared with neat PLA.     

Environmental implications of perfluorotributylamine—a potent greenhouse gas

Perfluorotributylamine (PFTBA), a newly discovered greenhouse gas with the highest radiative efficiency, may have been released into the environment from a variety of industrial and medical uses in small amounts, leading to the potential contribution to the global warming addressed in the United Nations Framework Convention on Climate Change Kyoto Protocol. The aims of this article are to review the physicochemical properties and commercial/potential uses of PFTBA reported in the current available literature and also discuss its environmental implications based on its molecular structure. Results showed that PFTBA had extremely low solubility in water and relatively high vaporization from the water bodies, suggesting that this long-lived greenhouse gas will sink into the atmosphere. This paper also addressed the possible loss pathways through reactions with highly reactive ions in the upper atmosphere and toxic decomposition products (e.g., hydrogen fluoride, fluorine, and carbonyl fluoride) emitted when heated at high temperature. In this regard, there is a need for PFTBA emission reduction strategies due to its increasing usage in many professional applications and its potential contribution to anthropogenic climate forcing in the near future.     

Cardiotoxin III suppresses the invasiveness of MDA-MB-231 cells by targeting proto-oncogene tyrosine-protein kinase Src and reversing mesenchymal-to-epithelial transition

The epithelial-to-mesenchymal transition is the first step required for breast cancer to initiate metastasis. The aberrant activation of proto-oncogene tyrosine-protein kinase Src regulates multiple functions during tumor progression. Cardiotoxin III, a basic polypeptide isolated from Naja naja atra venom, has been shown to exhibit anticancer activity; however, the effect of cardiotoxin III on the epithelial-to-mesenchymal transition of cancer cells remains elusive. Exposure of MDA-MB-231 cells to cardiotoxin III resulted in morphological changes and upregulation of E-cadherin with a concomitant decrease in N-cadherin and vimentin protein levels, resulting in the inhibition of cell migration and invasion. Cardiotoxin III induced downregulation of snail and slug expression. Simultaneously, cardiotoxin III suppressed Src phosphorylation and downstream activation of focal adhesion kinase, of the docking protein p130^cas, and of paxillin. In addition, cardiotoxin III inhibited the phosphorylation of extracellular signal-regulated kinase and phosphatidylinositol 3-kinase. The Src specific inhibitor 4-amino-5-(4-chlorophenyl)-7-(dimethylethyl)pyrazolo[3,4-d]pyrimidine decreased in the phosphorylation and the expression changes of epithelial-to-mesenchymal transition markers in a similar way. Thus, cardiotoxin III has a novel anticancer effect by suppressing proto-oncogene tyrosine-protein kinase activity, reversing epithelial-to-mesenchymal transition.     

Prediction of individual Freundlich isotherms from binary and ternary phenolic compounds mixtures

Method for simultaneous determination of individual component's adsorption equilibrium parameters for binary and ternary phenolic compounds mixtures was investigated in this research. The Freundlich equilibrium parameters of binary and ternary component of phenolic compounds were determined from one fixed composition of phenolic wastewater. The simulation results obtained from both binary and ternary systems on the basis of ideal adsorbed solution theory were consistent with single component equilibrium data.