Comparison of leaching characteristics of heavy metals in APC residue from an MSW incinerator using various extraction methods

This study investigates four extraction methods (water extraction, toxicity characteristics leaching procedure (TCLP), modified TCLP with pH control, and sequential chemical extraction (SCE)), each representing different liquid-to-solid (L/S) ratios, pH controls, and types of leachant, and their effects on the leaching concentration of heavy metals in municipal solid waste (MSW) incinerator air pollution control (APC) residue. The results indicated that for extraction with distilled water, the heavy metal leaching concentration (mg/l) decreased with L/S ratio, but the amount of heavy metal released (AHMR), defined as the leached amount of heavy metals to the weight of the tested sample (mg/kg), increased with an increase in L/S ratio, in the range of 2-100. The results also showed that both the leaching concentration and the amount of released metals were strongly pH-dependent in the TCLP and modified TCLP tests. In the case of pHs lower than 6.5, the leaching concentrations of Cd, Pb, Cu, Zn, and Cr decreased with an increase in pH. As pH increased higher than 6.5, Cr and Zn were almost insoluble. Meanwhile, Cd and Cu also showed a similar trend but at pHs of 8.5 and 7.5, respectively. Due to the nature of amphoteric elements, in the case of pHs higher than 7, the Pb leaching concentration increased with increasing pH. In modified TCLP tests with the pH value controlled at the same level as in the SCE test, the heavy metal speciation approached the extractable carbonate bound fraction by the SCE. Both amounts of targeted metals leached from the SCE and modified TCLP tests were much higher than those for the regular TCLP and water extraction tests.     

Interactions between two introduced species: Zostera japonica (dwarf eelgrass) facilitates itself and reduces condition of Ruditapes philippinarum (Manila clam) on intertidal flats

Dwarf eelgrass (duckgrass; Zostera japonica) and Manila clams (Ruditapes philippinarum) are two introduced species that co-occur on intertidal flats of the northeast Pacific. Through factorial manipulation of clam (0, 62.5, 125 clams m⁻²) and eelgrass density (present, removed by hand, harrowed), we examined intra- and interspecific effects on performance, as well as modification of the physical environment. The presence of eelgrass reduced water flow by up to 40% and was also observed to retain water at low tide, which may ameliorate desiccation and explain why eelgrass grew faster in the presence of conspecifics (positive feedback). Although shell growth of small (20–50 mm) clams was not consistently affected by either treatment in this 2-month experiment, clam condition improved when eelgrass was removed. Reciprocally, clams at aquaculture densities had no effect on eelgrass growth, clam growth and condition, or porewater nutrients. Overall, only Z. japonica demonstrated strong population-level interactions. Interspecific results support an emerging paradigm that invasive marine ecosystem engineers often negatively affect infauna. Positive feedbacks for Z. japonica may characterize its intraspecific effects particularly at the stressful intertidal elevation of this study (+1 m above mean lower low water).     

Will unit‐pricing enhance recycling?

Unit pricing is a program in solid waste management that integrates market instruments to encourage households to reduce waste generation and increase recycling. Many studies have shown that unit pricing is effective, especially when the evaluation is based on comparing outcomes before and after implementation. In this paper, we use the so-called difference-in-differences approach to evaluate unit pricing. This approach can provide a less-biased estimation, and can help to examine whether a unit pricing program generates less waste and higher recycling or results in illegal dumping in neighboring regions. Using the fee-per-bag program implemented in Taipei City, Taiwan, as a case study, we found that unit pricing does reduce the amount of garbage but its impact on recycling is not as significant as the current literature suggests. Moreover, the program causes a serious negative externality: more than 60%?of the garbage reduction in the city is due to increased dumping of waste in neighboring regions. As the impact of unit‐pricing on recycling is limited, policy-makers cannot rely solely on this program to enhance recycling in the management of municipal solid waste.     

Effects of emulsified asphalt on the mechanical properties of granulation of calcium fluoride sludge

Journal of Material Cycles and Waste Management - To reduce the landfill volume of waste CaF2 sludge, artificial fluorite bulk (AFB) is granulated by blending CaF2 sludge and emulsified asphalt...     

Environmental design implementation in Taiwan's industries

This study investigated Taiwan's industries to identify the characteristics of companies most advanced in environmental design. Thirty design principles in five categories were used to define advanced environmental design. The five categories are: use of raw materials, use of energy, design for recyclability, product life cycle assessment, and packaging optimization. We found that of the 30 design principles only eight were applied consistently by Taiwanese manufacturers. Most effort was given to the “use of energy” category. The most advanced environmental design was found at large companies—those with over 2000 employees, 3 billion in capital, and/or 3 billion in annual sales.     

Determination of potential sources of PCBs and PBDEs in sediments of the Niagara River

Sediments from Niagara River, an important waterway connecting two of the Great Lakes (Lake Erie to Lake Ontario), were analyzed for 14 congeners of polychlorinated biphenyls (PCBs) and 9 congeners of polybrominated diphenyl ethers (PBDEs) using accelerated solvent extraction and gas chromatography/mass spectrometry. Total concentrations of PCBs ranged from 1.7 to 124.6 ng/g were PCBs 138 and 153 were found in all samples. All sites but one showed PBDE in sediments with total concentrations as high as 148 ng/g, suggesting that PBDE is becoming an important class of POP. A land-use and coverage map was used to trace potential localized sources of PCB and PBDE contamination. Results indicate that the highest levels of PCBs and PBDEs were found in sediments collected from areas closest to the discharge locations of municipal wastewater treatment plants (WWTP) and local industries. This is the first study that suggests the importance of WWTP discharges as a potential source of PBDE contamination in the Great Lakes.     

Enhancing performance and durability of slag made from incinerator bottom ash and fly ash

This work presents a method capable of melting the incinerator bottom ash and fly ash in a plasma furnace. The performance of slag and the strategies for recycling of bottom ash and fly ash are improved by adjusting chemical components of bottom ash and fly ash. Ashes are separated by a magnetic process to improve the performance of slag. Analytical results indicate that the air-cooled slag (ACS) and magnetic-separated slag (MSS) have hardness levels below 590 MPa, indicating fragility. Additionally, the hardness of crystallized slag (RTS) is between 655 and 686 MPa, indicating toughness. The leached concentrations of heavy metals for these three slags are all below the regulatory limits. ACS appears to have better chemical stability than MSS, and is not significantly different from RTS. In the potential alkali-silica reactivity of slag, MSS falls on the border between the harmless zone and the potentially harmful zone. ACS and RTS fall in the harmless zone. Hence, the magnetic separation procedure of ashes does not significantly improve the quality of slag. However, RTS appears to improve its quality.     

Occurrence of perfluorinated compounds in the aquatic environment as found in science park effluent,river water,rainwater, sediments,and biotissues

The current article maps perfluoroalkyl acids (PFAAs) contamination in the largest Science Park of Taiwan. The occurrence of ten target PFAAs in the effluent of an industrial wastewater treatment plant (IWWTP), its receiving rivers, rainwater, sediment, and the muscles and livers of fish was investigated. All target PFAAs were found in effluent of IWWTP, in which perfluorooctane sulfonate (PFOS) (6,930 ng/L), perfluorohexyl sulfonate (PFHxS) (2,662 ng/L) and perfluorooctanoic acid (PFOA) (3,298 ng/L) were the major constituents. Concentrations of PFBS and PFOS in the IWWTP downstream areas have exceeded safe concentration levels of avian and aquatic life, indicating a potential risk to wildlife in those areas. In sediment samples, predominant contaminants were PFOS (1.5–78 ng/g), PFOA (0.5–5.6 ng/g), and perfluorododecanoic acid (PFDoA) (nd–5.4 ng/g). In biological tissue samples, concentrations as high as 28,933 ng/g of PFOS were detected in tilapia and catfish liver samples. A positive correlation for log (C _sediment/C _water) and log (C _tissue/C _water) was found. The concentration and proportion (percentage of all PFAAs) of PFOS found in biotissue samples from the Keya River (which receives industrial wastewater) were found to be much greater (200 times) than those of samples from the Keelung River (which receives mainly domestic wastewater). These findings suggest that the receiving aquatic environments and, in turn, the human food chain can be significantly influenced by industrial discharges.     

The implementation of a human factors engineering checklist for human–system interfaces upgrade in nuclear power plants

The primary purpose of this paper is to provide a human factors engineering (HFE) checklist for human–system interfaces (HSIs) upgrades in nuclear power plants (NPPs). The HFE checklist is used to review the HSIs design submittals prepared by licensees or applicants for a license or design certification of a HSI upgrade. NUREG-series regulation documents are used to develop the main frame of the initial HFE checklist. The contents of the HFE checklist are constructed by the theories and principles governing human factors. Then, verification and validation (V&V) of the HFE checklist is accomplished by validity and reliability evaluation. The results show that the HFE checklist has sufficient validity and reliability for the review of HSI upgrades in NPPs.     

A fuzzy risk assessment approach for occupational hazards in the construction industry

The techniques in the construction industry have been improved due to the rapid development of science and technology. However, the constructional hazards are not decreased as expected. To reduce or prevent occupational hazards in the construction industry, a fuzzy risk assessment method was proposed to provide a prevention and improvement technique against occupational hazards. This method used two-stage quality function deployment (QFD) tables to represent the relationships among construction items, hazard types and hazard causes. A fuzzy analytic network process (ANP) method was developed to identify important hazard types and hazard causes. Failure modes and effect analysis (FMEA) was performed to assess the risk value of hazard causes based on the fuzzy inference approach. The proposed method was applied to a telecom engineering company in southern Taiwan. The performance evaluation result indicated that this method can provide satisfactory risk assessment values of hazard causes and relevant improvement strategies.