Encapsulation behaviors of metals in slags containing various amorphous volume fractions

In this study, a melting process with addition of SiO2 was applied to treat incinerator fly ash. To describe the encapsulation behaviors of metals quantitatively, the amorphous volume fraction (AVF) of slags was initially determined. Vitrification appeared to reduce the mobility of Cr, Cu, Mn, and Ni instead of significantly immobilizing Cd, Pb, and Zn. It was verified that SiO2 enhanced the formation of an amorphous glassy structure. With the increase of SiO2, the crystalline phases would gradually diminish and transform into a higher silica-connected species. During the formation of slag matrix, Al, Ca, and Mg could modify the glass network, and consequently the encapsulation behaviors of these species would noticeably affect the chemical stability of slags. Significant immobilization of crust metals could be achieved only when a more compact and interconnected amorphous glass network was formed. Hence, it indicated that a higher AVF silica-based slag had a better potential to resist acid attack. In conclusion, for environmental protection, it is important to investigate the correlation between the encapsulation behaviors of metals and the crystalline characteristics of slag structure.     

Biodegradation of crystal violet by a Shewanella sp. NTOU1

A bacterial isolate, strain NTOU1, originally isolated from the cooling system in an oil refinery could decolorize and detoxify crystal violet under anaerobic conditions. The strain was characterized and identified as a member of Shewanella decolorationis based on Gram staining, morphology characters, biochemical tests, the 16S rRNA gene and the gyrase subunit beta gene (gyrB). The optimum pH value and temperature for decolorization of crystal violet by this strain under anaerobic conditions were pH 8-9 and 30-40 degrees C, respectively. Formate (20 mM) was the best electron donor. Addition of ferric citrate did not inhibit decolorization of crystal violet, the addition of thiosulfate, ferric oxide, or manganese oxide slightly decreased decolorization, while addition of nitrite (20 mM) inhibited the decolorization of crystal violet. By supplementing the medium with formate and ferric citrate and cultivating it under optimum pH and temperature, this strain could remove crystal violet, at a concentration of 1500 mg l(-1), at the rate of 298 mg l(-1) h(-1) (during decolorization the OD(600) of the cell culture increased from approximately 0.6 to approximately 1.2). GC/MS analysis of the degradation products of crystal violet detected the presence of N,N'-bis(dimethylamino) benzophenone (Michler's Ketone), [N,N-dimethylaminophenyl] [N-methylaminophenyl] benzophenone, N,N-dimethylaminobenzaldehyde, N,N-dimethylaminophenol, and 4-methylaminophenol. These results suggest that crystal violet was biotransformed into N,N-dimethylaminophenol and Michler's Ketone prior to further degradation of these intermediates. This paper proposes a probable pathway for the degradation of crystal violet by this Shewanella sp. Cytotoxicity and antimicrobial tests showed that the process of decolorization also detoxify crystal violet.     

An integrated approach for identification of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) pollutant sources based on human blood contents

Background, aim, and scope  

This study developed an integrated approach to identify pollutant sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) of workers based on their blood contents.     

The effects of FeCl3 on the distribution of the heavy metals Cd, Cu, Cr, and Zn in a simulated multimetal incineration system

Recognizing that waste-derived chlorine can enhance heavy metal emissions by forming volatile metallic chlorides during municipal solid waste (MSW) combustion, and that in Taiwan, FeCl3-containing sewage sludge may either be landfilled or coincinerated with other MSW, this study thus investigated the effects of FeCl3 on the speciation and partitioning of heavy metals in a multimetal incineration system by using a tubular furnace and FeCl3-spiked simulated wastes. The molar ratio of chlorine content to heavy metal content (referred to as the Cl/ M ratio), ranging from 3 to 200, was used as a parameter to evaluate the effects of chlorine on the movement of heavy metals between the incinerator discharges. Results indicate that speciation and partitioning were related to the affinity between the chlorine and the heavy metals and between chlorine and hydrogen in the combustion system. The effectiveness of increasing the Cl/M ratio to the formation potential of metallic chlorides and on the shift of heavy metals from the bottom ash to the fly ash and/or the flue gases was found to have in increasing order as follows: Zn>Cu>Cr, a phenomenon basically reflecting the volatility of the heavy metals and their chlorides formed during combustion.     

A review on environmental distributions and risk management of phenols pertaining to the endocrine disrupting chemicals in Taiwan

Some phenols, including pentachlorophenol, dichlorophenol, alkylphenols (nonylphenol & octylphenol) and bisphenol-A, have been identified as endocrine disrupting chemicals (EDCs). These phenolic EDCs are extensively used in a wide range of household products, thus posing potential health risks for humans exposed to them. From the viewpoints of ecotoxicology, human health and regulations, it is urgent to restrict the emissions and releases of these estrogenic chemicals from the industrial processes and commercial products. This review article first focused on the physicochemical properties of phenolic EDCs and their industrial/commercial uses. Furthermore, their environmental distributions and regulatory frameworks for integrated risk management of these chemicals in Taiwan were conducted as a case study. Emphasis was thus put on the cross-ministerial joint venture (i.e., environment, health, agriculture, labor, and industry authorities), and the government policy on the risk management of EDCs. Finally, some recommendations for pollution prevention and toxicity reduction of phenolic EDCs were also addressed and analyzed to progress towards a sustainable society in Taiwan.     

Simulation modeling for nitrogen removal and experimental estimation of mass fractions of microbial groups in single-sludge system

Nitrification-denitrification in a single-sludge nitrogen removal system (SSNRS; with a sufficient carbon source for denitrification) was performed. With an increase in the mixed liquor recycle ratio (R(m)) from 1 to 2, the total nitrogen (TN) removal efficiency at a lower volumetric loading rate (VLR=0.21 NH(4)(+)-N m(-3) d(-1)) increased, but the TN removal efficiency at a higher VLR (0.35 kg NH(4)(+)-N m(-3) d(-1)) decreased. A kinetic model that accounts for the mass fractions of Nitrosomonas, Nitrobacter, nitrate reducer and nitrite reducer (f(n1), f(n2), f(dn1), and f(dn2)) in the SSNRS and an experimental approach for the estimation of the mass fractions of nitrogen-related microbial groups are also proposed. The estimated f(dn1) plus f(dn2) (0.65-0.83) was significantly larger than the f(n1) plus f(n2) (0.28-0.32); the f(n1) (0.21-0.26) was larger than the f(n2) (0.05-0.07); and the f(dn1) (0.32-0.45) varied slightly with the f(dn2) (0.33-0.38). At the lower VLR, the f(dn1) plus f(dn2) increased with increasing R(m); however at the higher VLR, the f(dn1) plus f(dn2) did not increase with increasing R(m). By using the kinetic model, the calculated residual NH(4)(+)-N and NO(2)(-)-N in the anoxic reactor and NO(2)(-)-N and NO(3)(-)-N in the aerobic reactor were in fairly good agreement with the experimental data; the calculated NO(3)(-)-N in the anoxic reactor was over-estimated and the calculated NH(4)(+)-N in the aerobic reactor was under-estimated.     

Degradation of Polylactic Acid by Irradiation

Polylactic acid (PLA) waste has various treatment methods, such as natural decomposition, composting, incineration, and hydrolysis. Degradation of PLA waste by gamma ray and pulsed light irradiation is an efficient, safe and innovative method that also protects the environment. The focus of this study was on the development of an alternative, green technology for solving the PLA waste disposal problem of PLA, rather than using incineration or the landfill method. We used a novel approach to identify the thermal decomposition and heat properties of crystalline poly lactic acid, non-crystalline polylactic acid, and blend polylactic acid. The approach involved the degradation of the materials with gamma ray and pulsed light irradiation followed by thermogravimetric analysis (TGA). We also developed a novel approach to the heat effect, including heat reactivity properties by TGA tests and thermal mass loss simulation for proper application, processing, and waste treatment conditions. The data from this study can be used to improve the design of operation and waste treatment protocols for PLA, which will benefit the environment.     

Handling leachate from glass cullet stockpiles

Mixed glass cullet (crushed recycled glass containers) is stockpiled uncovered before use as roadway construction aggregate or daily cover in landfills. Rainwater that leaches through the stockpiles dissolves and suspends contaminants such as those from food residuals and paper labels. The objective of this study was to determine leachate quantity and quality from cullet stockpiles as a basis for development of Best Management Practices (BMPs). Four 35-tonne field stockpiles were set up for leachate analysis and to determine the effects of mechanical turning treatment on the leachate. Field-collected leachate and laboratory-generated washwater of cullet (water:cullet = 3:1 by weight) were both analyzed for basic wastewater parameters, which showed pollutant levels comparable to or higher than those of untreated domestic wastewater or urban stormwater. While organic contamination decreased substantially (e.g., washwater BOD > 95% reduction), TKN and total-phosphorus levels in leachate ranged between 11.6–154 mg L^?1 and 1.6–12.0 mg L^?1, respectively, and remained comparable to levels found in untreated domestic wastewater after four months. Turning enhanced the degradation of the organic constituents inside the stockpiles, which was confirmed by elevated temperatures. Based on this study, leachate from glass cullet stockpiles should not be released to surface water. For leachate from long-term cullet stockpiles, release to groundwater should be only done after treatment to reduce nitrogen levels.     

Decision Tree-Based Classifier Combined with Neural-Based Predictor for Water-Stage Forecasts in a River Basin During Typhoons: A Case Study in Taiwan

To solve the complicated problem of water-stage predictions under the interaction of upstream flows and tidal effects during typhoon attacks, this article presents a novel approach to river-stage predictions. The proposed CART-ANN model combines both the decision trees (classification and regression trees [CART]) and the artificial neural network (ANN) techniques, which comprise the multilayer perceptron (MLP) and radial basis function (RBFNN). The combined CART-ANN model involves a two-step predicting process. First, the CART stage-level classifier can classify the river stages into higher, middle, and lower levels. Then, the ANN-based water-stage predictors are employed to predict the water stages. The proposed model was applied to the Tanshui River Basin in Taiwan. The Taipei Bridge, which is close to the estuary and affected by tidal effects, was taken as the study gauge. The mean square error and the mean absolute error were used for evaluating the variance and bias performances of the models. This study makes two contributions. First, the CART-MLP and CART-RBF were modeled to predict river stages under tidal effects during typhoons, and they were compared with three benchmark models, CART, back-propagation neural network, and RBFNN. Second, the CART-RBF successfully demonstrated that it achieved more accurate prediction than CART-MLP and three benchmark models.