Concentrations and analysis of health risks of ambient air metallic elements at Longjing site in central Taiwan

Environmental Geochemistry and Health - The concentrations of particulates and metallic elements that were bound to total suspended particulates in ambient air at Long Cyuan Elementary School...     

DEVELOPMENT OF A GIS‐BASED FLOOD INFORMATION SYSTEM FOR FLOODPLAIN MODELING AND DAMAGE CALCULATION1

ABSTRACT: This work presents a flexible system called GIS‐based Flood Information System (GFIS) for floodplain modeling, flood damages calculation, and flood information support. It includes two major components, namely floodplain modeling and custom designed modules. Model parameters and input data are gathered, reviewed, and compiled using custom designed modules. Through these modules, it is possible for GFIS to control the process of flood‐plain modeling, presentation of simulation results, and calculation of flood damages. Empirical stage‐damage curves are used to calculate the flood damages. These curves were generated from stage‐damage surveys of anthropogenic structures, crops, etc., in the coastal region of a frequently flooded area in Chia‐I County, Taiwan. The average annual flood damages are calculated with exceedance probability and flood damages for the designed rainfalls of 2, 5, 10, 25, 50, 100, and 200 year recurrence intervals with a duration of 24 hours. The average annual flood depth in this study area can also be calculated using the same method. The primary advantages of GFIS are its ability to accurately predict the locations of flood area, depth, and duration; calculate flood damages in the floodplain; and compare the reduction of flood damages for flood mitigation plans.     

Composting of vegetable waste.

The effects of the aeration, seeding, and agitation on the composting of vegetable waste were studied in a laboratory-scale reactor. Experimental results showed that the final product at the end of a 4-day composting period met multiple maturity indices suggested by many researchers. The evolution of carbon dioxide during the composting process could be modelled with a modified Gompertz equation that described the bacteria growth successfully. Multivariate regression analysis was used to study the effects of operating parameters on the carbon conversion. The response surface contour plots were constructed using the regression equation for the examination of the dependence of carbon conversion on operating parameters. The maximum carbon conversion of 14.54% was obtained when the percentage of seeding was set at 14.5%, the air suction rate was set at 2.6 L kg(-1) dry-solid min(-1), and the agitator operated half of the time, alternating on and off for every 5 min. Future work will focus on the application of the data and the experience gained in this work to composters of pilot and semi-commercial scales.     

Reproduction and population dynamics of the fissiparous brittle star Ophiactis savignyi (Echinodermata: Ophiuroidea)

Reproductive cycle, asexual reproduction, and population dynamics of the fissiparous brittle star, Ophiactis savignyi, which inhabits the exhalant passages of the sponge Haliclona sp. were examined monthly from February 1991 to January 1992 at Wanlitung, southern Taiwan (22°N; 120°E). Mature gametes were found from March to December, but release was mainly in May and June. Sexual recruits were found from May to December, with the highest frequency (14.1% of population) in June. Sexual recruits composed 2.4% of the 1-yr sample. Sex ratio of male to female was 24:1. Fission occurred throughout the year, although the frequency of recently split individuals was lower from January to June (6 to 31%), and higher from July to December (42 to 52%). The occurrence of fission was highest after spawning. Regenerating individuals composed 48.2% of the 1-yr sample. Population density fluctuated greatly during summer due to recruitment by fission and mortality or dispersal due to the stressful environmental conditions. Both sexual and asexual reproduction of O. savignyi were successful at this site.     

Inorganic Acid Emission Factors of Semiconductor Manufacturing Processes

Abstract

A huge amount of inorganic acids can be produced and emitted with waste gases from integrated circuit manufacturing processes such as cleaning and etching. Emission of inorganic acids from selected semiconductor factories was measured in this study. The sampling of the inorganic acids was based on the porous metal denuders, and samples were then analyzed by ion chromatography. The amount of chemical usage was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County according to the Taiwan Environmental Protection Agency regulation. The emission factor is defined as the emission rate (kg/month) divided by the amount of chemical usage (L/month). Emission factors of three inorganic acids (i.e., hydrofluoric acid [HF], hydrochloric acid [HQ], and sulfuric acid [H₂SO₄]) were estimated by the same method. The emission factors of HF and HCl were determined to be 0.0075 kg/L (coefficient of variation [CV] = 60.7%, n = 80) and 0.0096 kg/L (CV = 68.2%, n = 91), respectively. Linear regression equations are proposed to fit the data with correlation coefficient square (R²) = 0.82 and 0.9, respectively. The emission factor of H₂SO₄, which is in the droplet form, was determined to be 0.0016 kg/L (CV = 99.2%, n = 107), and its R² was 0.84. The emission profiles of gaseous inorganic acids show that HF is the dominant chemical in most of the fabricators.     

Three-dimensional modeling of air flow and pollutant dispersion in an urban street canyon with thermal effects

Effects of excess ground and building temperatures on airflow and dispersion of pollutants in an urban street canyon with an aspect ratio of 0.8 and a length-to-width ratio of 3 were investigated numerically. Three-dimensional governing equations of mass, momentum, energy, and species were modeled using the RNG k-epsilon turbulence model and Boussinesq approximation, which were solved using the finite volume method. Vehicle emissions were estimated from the measured traffic flow rates and modeled as banded line sources, with a street length and bandwidths equal to typical vehicle widths. Both measurements and simulations reveal that pollutant concentrations typically follow the traffic flow rate; they decline as the height increases and are higher on the leeward side than on the windward side. Three-dimensional simulations reveal that the vortex line, joining the centers of cross-sectional vortexes of the street canyon, meanders between street buildings and shifts toward the windward side when heating strength is increased. Thermal boundary layers are very thin. Entrainment of outside air increases, and pollutant concentration decreases with increasing heating condition. Also, traffic-produced turbulence enhances the turbulent kinetic energy and the mixing of temperature and admixtures in the canyon. Factors affecting the inaccuracy of the simulations are addressed.     

Mathematical model for carbon dioxide evolution from the thermophilic composting of synthetic food wastes made of dog food

The impacts of the aeration and the agitation on the composting process of synthetic food wastes made of dog food were studied in a laboratory-scale reactor. Two major peaks of CO(2) evolution rate were observed. Each peak represented an independent stage of composting associated with the activities of thermophilic bacteria. CO(2) evolutions known to correlate well with microbial activities and reactor temperatures were fitted successfully to a modified Gompertz equation, which incorporated three biokinetic parameters, namely, CO(2) evolution potential, specific CO(2) evolution rate, and lag phase time. No parameters that describe the impact of operating variables are involved. The model is only valid for the specified experimental conditions and may look different with others. The effects of operating parameters such as aeration and agitation were studied statistically with multivariate regression technique. Contour plots were constructed using regression equations for the examination of the dependence of CO(2) evolution potentials on aeration and agitation. In the first stage, a maximum CO(2) evolution potential was found when the aeration rate and the agitation parameter were set at 1.75 l/kg solids-min and 0.35, respectively. In the second stage, a maximum existed when the aeration rate and the agitation parameter were set at 1.8 l/kg solids-min and 0.5, respectively. The methods presented here can also be applied for the optimization of large-scale composting facilities that are operated differently and take longer time.     

An overview of environmental hazards and exposure risk of hydrofluorocarbons (HFCs)

Hydrofluorocarbons (HFCs) are being used as replacements for chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) that cause significantly stratospheric ozone depletion and global warming. HFCs under commercial uses as cleaning solvents in the electronic components, blowing agent in the foamed plastics, refrigerant in the air conditioning units and refrigerators, fire suppression agent in the fire protection, propellant in the metered dose inhalers (MDIs), and dry etching agent in the semiconductor manufacturing. Among these HFCs, 1,1,1,2-tetrafluoroethane (HFC-134a) is the most widely used one. From the environmental, ecological, and health points of view, it is urgent to mitigate and control the emissions of these HFCs from a diversity of commercial applications and industrial processes. This article aims to introduce these HFCs in commercial uses and environmental hazards (i.e., global warming, photochemical potential, flammability safety, environmental partition and ecotoxicity). Further, the updated data on the human toxicity, occupational exposure and health risk of these HFCs (esp., HFC-134a) are addressed in this review paper.     

Effects of the Ellagic acid on the N‐Acetyltransferase activity and Acetylation of 2‐aminofluorene in the rat

The effects of the ellagic acid on the in vitro and in vivo acetylation of 2‐aminofluorene were investigated in male Sprague‐Dawley rats. For in vitro examination, cytosols with or without ellagic acid co‐treatment showed different percentage of 2‐aminofluorene acetylation. For in vivo examination, pre‐treatment of male rats with ellagic acid (10 mg/kg) 24h prior to the administration of 2‐aminofluorene (50 mg/kg) resulted in a 26% and 29%, respectively, decrease in the urinary and fecal recovery of N‐acetyl‐2‐aminofluorene, and a 37% decrease in the metabolic clearance of 2‐aminofluorene to N‐acetyl‐2‐aminofluorene. This is the first demonstration that ellagic acid decrease the N‐acetylation of carcinogens in vitro and in vivo.     

Relationships Between Copper Species and Forms,Hydrographic and Biomass Parameters in the Taiwan Erhjin Chi Coastal Area

The first incident of green oysters (Crassostrea gigas) was reported in Taiwan in the Charting coastal area in January, 1986 and mortality was reported three months later. the cause of the greened oysters was identified as copper pollution. the copper content of the green oysters was extremely high - 2100 ppm, 2225 ppm, and 4400 ppm dry weight, in January, 1986, February 1987, and January 1989, respectively. in this paper we summarize the seasonal and regional distributions of copper species (complexed by inorganic and organic ligands, labile and non-labile, polar and non-polar) and forms (dissolved and particulate) and the hydrographic and biomass parameters (mainly particulate organic carbon, chloropyll -α, adenosine triphosphate and primary production) in sea water in the Erhjin Chi coastal area. in general, high concentrations of particulate material (0.24 to 724 ppb) and non-labile organic copper (0.03 to 21.5 ppb) were observed. Low values of polar organic copper (<0.02 to 16.5 ppb) indicated that non-polar organic complexes (0.3 to 20.4 ppb) from man-made organic pollutants were the major complexes in the area studied. On the basis of this data, the cause of greening and mortality in oysters is evaluated in relation to the bioavailable copper (sum of particulate and labile copper) and copper assimilative capacity (detoxicant). Finally, the correlations between the species and forms of copper, hydrographic and biomass parameters are also discussed.