Characterization of carbon fractions for atmospheric fine particles and nanoparticles in a highway tunnel

Fine particles (PM_2.5) and nanoparticles (PM_0.1) were sampled using Dichotomous sampler and MOUDI, respectively, in Xueshan Tunnel, Taiwan. Eight carbon fractions were analyzed using IMPROVE thermal-optical reflectance (TOR) method. The concentrations of different temperature carbon fractions (OC1–OC4, EC1–EC3) in both PM_2.5 and PM_0.1 were measured and the correlations between OC and EC were discussed. Results showed that the ratios of OC/EC were 1.26 and 0.67 for PM_2.5 and PM_0.1, respectively. The concentration of EC1 was found to be more abundant than other elemental carbon fractions in PM_2.5, while the most abundant EC fraction in PM_0.1 was found to be EC2. The variation of contributions for elemental carbon fractions was different among PM_2.5 and PM_0.1 samples, which was partly owing to the metal catalysts for soot oxidation. The correlations between char-EC and soot-EC showed that char-EC dominated EC in PM_2.5 while soot-EC dominated EC in PM_0.1. Using eight individual carbon fractions, the gasoline and diesel source profiles of PM_0.1 and PM_2.5 were extracted and analyzed with the positive matrix factorization (PMF) method.     

Biohydrogen production by Clostridium butyricum and Rhodopseudomonas palustris in Co-cultures

This study evaluated biohydrogen production by co-culture of Clostridium butyricum and Rhodopseudomonas palustris. C. butyricum and R. palustris were grown separately and together as batch cultures. Hydrogen production, growth, NH₄-N, total volatile fatty acid production, and sucrose degradation were monitored. The hydrogen production of the co-culture produced 562 ml, R. palustris 426 ml, and C. butyricum 333 ml. The co-culture produced 2.16 mol H₂/mol sucrose, C. butyricum and R. palustris produced 1.77 and 1.64 mol H₂/mol sucrose, respectively. The co-culture was more efficient in the hydrogen production. Therefore, the co-culture is a good method for biohydrogen fermentation.     

TiO2 nanotube-supported cu as the catalyst for selective NO reduction with NH3

Catalyst supports composed of titanate nanotubes were prepared from hydrothermal treatment on TiO2 nanoparticles in NaOH followed by HCl washing. The nanotubes exhibited well-defined TiO2 anatase phase after calcination at 400 degrees C. The nanotube aggregates and other commercially available TiO2 nanoparticles, all with surface areas >300 m(2)/g, were impregnated with Cu and examined in selective catalytic reduction of NO with NH3. In catalyst preparation, the nanotubes were found to be more thermally stable than nanoparticles, withstanding agglomeration at elevated temperatures. The Cu species supported on the nanotubes showed a higher catalytic activity than those supported on the nanoparticles. Analysis with temperature programmed reduction, X-ray photoelectron spectroscopy, and NO adsorption reflected that the layered-titanate feature of the tube wall was advantageous for even distribution of the Cu species, thus leading to the high-catalytic activity of the tubular Cu/TiO2 catalyst.     

Encapsulation behaviors of metals in slags containing various amorphous volume fractions

In this study, a melting process with addition of SiO2 was applied to treat incinerator fly ash. To describe the encapsulation behaviors of metals quantitatively, the amorphous volume fraction (AVF) of slags was initially determined. Vitrification appeared to reduce the mobility of Cr, Cu, Mn, and Ni instead of significantly immobilizing Cd, Pb, and Zn. It was verified that SiO2 enhanced the formation of an amorphous glassy structure. With the increase of SiO2, the crystalline phases would gradually diminish and transform into a higher silica-connected species. During the formation of slag matrix, Al, Ca, and Mg could modify the glass network, and consequently the encapsulation behaviors of these species would noticeably affect the chemical stability of slags. Significant immobilization of crust metals could be achieved only when a more compact and interconnected amorphous glass network was formed. Hence, it indicated that a higher AVF silica-based slag had a better potential to resist acid attack. In conclusion, for environmental protection, it is important to investigate the correlation between the encapsulation behaviors of metals and the crystalline characteristics of slag structure.     

Biodegradation of crystal violet by a Shewanella sp. NTOU1

A bacterial isolate, strain NTOU1, originally isolated from the cooling system in an oil refinery could decolorize and detoxify crystal violet under anaerobic conditions. The strain was characterized and identified as a member of Shewanella decolorationis based on Gram staining, morphology characters, biochemical tests, the 16S rRNA gene and the gyrase subunit beta gene (gyrB). The optimum pH value and temperature for decolorization of crystal violet by this strain under anaerobic conditions were pH 8-9 and 30-40 degrees C, respectively. Formate (20 mM) was the best electron donor. Addition of ferric citrate did not inhibit decolorization of crystal violet, the addition of thiosulfate, ferric oxide, or manganese oxide slightly decreased decolorization, while addition of nitrite (20 mM) inhibited the decolorization of crystal violet. By supplementing the medium with formate and ferric citrate and cultivating it under optimum pH and temperature, this strain could remove crystal violet, at a concentration of 1500 mg l(-1), at the rate of 298 mg l(-1) h(-1) (during decolorization the OD(600) of the cell culture increased from approximately 0.6 to approximately 1.2). GC/MS analysis of the degradation products of crystal violet detected the presence of N,N'-bis(dimethylamino) benzophenone (Michler's Ketone), [N,N-dimethylaminophenyl] [N-methylaminophenyl] benzophenone, N,N-dimethylaminobenzaldehyde, N,N-dimethylaminophenol, and 4-methylaminophenol. These results suggest that crystal violet was biotransformed into N,N-dimethylaminophenol and Michler's Ketone prior to further degradation of these intermediates. This paper proposes a probable pathway for the degradation of crystal violet by this Shewanella sp. Cytotoxicity and antimicrobial tests showed that the process of decolorization also detoxify crystal violet.     

An integrated approach for identification of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) pollutant sources based on human blood contents

Background, aim, and scope  

This study developed an integrated approach to identify pollutant sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) of workers based on their blood contents.     

The effects of FeCl3 on the distribution of the heavy metals Cd, Cu, Cr, and Zn in a simulated multimetal incineration system

Recognizing that waste-derived chlorine can enhance heavy metal emissions by forming volatile metallic chlorides during municipal solid waste (MSW) combustion, and that in Taiwan, FeCl3-containing sewage sludge may either be landfilled or coincinerated with other MSW, this study thus investigated the effects of FeCl3 on the speciation and partitioning of heavy metals in a multimetal incineration system by using a tubular furnace and FeCl3-spiked simulated wastes. The molar ratio of chlorine content to heavy metal content (referred to as the Cl/ M ratio), ranging from 3 to 200, was used as a parameter to evaluate the effects of chlorine on the movement of heavy metals between the incinerator discharges. Results indicate that speciation and partitioning were related to the affinity between the chlorine and the heavy metals and between chlorine and hydrogen in the combustion system. The effectiveness of increasing the Cl/M ratio to the formation potential of metallic chlorides and on the shift of heavy metals from the bottom ash to the fly ash and/or the flue gases was found to have in increasing order as follows: Zn>Cu>Cr, a phenomenon basically reflecting the volatility of the heavy metals and their chlorides formed during combustion.     

Simulation modeling for nitrogen removal and experimental estimation of mass fractions of microbial groups in single-sludge system

Nitrification-denitrification in a single-sludge nitrogen removal system (SSNRS; with a sufficient carbon source for denitrification) was performed. With an increase in the mixed liquor recycle ratio (R(m)) from 1 to 2, the total nitrogen (TN) removal efficiency at a lower volumetric loading rate (VLR=0.21 NH(4)(+)-N m(-3) d(-1)) increased, but the TN removal efficiency at a higher VLR (0.35 kg NH(4)(+)-N m(-3) d(-1)) decreased. A kinetic model that accounts for the mass fractions of Nitrosomonas, Nitrobacter, nitrate reducer and nitrite reducer (f(n1), f(n2), f(dn1), and f(dn2)) in the SSNRS and an experimental approach for the estimation of the mass fractions of nitrogen-related microbial groups are also proposed. The estimated f(dn1) plus f(dn2) (0.65-0.83) was significantly larger than the f(n1) plus f(n2) (0.28-0.32); the f(n1) (0.21-0.26) was larger than the f(n2) (0.05-0.07); and the f(dn1) (0.32-0.45) varied slightly with the f(dn2) (0.33-0.38). At the lower VLR, the f(dn1) plus f(dn2) increased with increasing R(m); however at the higher VLR, the f(dn1) plus f(dn2) did not increase with increasing R(m). By using the kinetic model, the calculated residual NH(4)(+)-N and NO(2)(-)-N in the anoxic reactor and NO(2)(-)-N and NO(3)(-)-N in the aerobic reactor were in fairly good agreement with the experimental data; the calculated NO(3)(-)-N in the anoxic reactor was over-estimated and the calculated NH(4)(+)-N in the aerobic reactor was under-estimated.     

A review on environmental distributions and risk management of phenols pertaining to the endocrine disrupting chemicals in Taiwan

Some phenols, including pentachlorophenol, dichlorophenol, alkylphenols (nonylphenol & octylphenol) and bisphenol-A, have been identified as endocrine disrupting chemicals (EDCs). These phenolic EDCs are extensively used in a wide range of household products, thus posing potential health risks for humans exposed to them. From the viewpoints of ecotoxicology, human health and regulations, it is urgent to restrict the emissions and releases of these estrogenic chemicals from the industrial processes and commercial products. This review article first focused on the physicochemical properties of phenolic EDCs and their industrial/commercial uses. Furthermore, their environmental distributions and regulatory frameworks for integrated risk management of these chemicals in Taiwan were conducted as a case study. Emphasis was thus put on the cross-ministerial joint venture (i.e., environment, health, agriculture, labor, and industry authorities), and the government policy on the risk management of EDCs. Finally, some recommendations for pollution prevention and toxicity reduction of phenolic EDCs were also addressed and analyzed to progress towards a sustainable society in Taiwan.