Review of total suspended particles (TSP) and PM<Subscript>2.5</Subscript> concentration variations in Asia during the years of 1998–2015

In Asian countries such as China, Malaysia, Pakistan, India, Taiwan, Korea, Japan and Hong Kong, ambient air total suspended particulates and PM_2.5 concentration data were collected and discussed during the years of 1998–2015 in this study. The aim of the present study was to (1) investigate and collect ambient air total suspended particulates (TSP) and PM_2.5 concentrations for Asian countries during the past two decades. (2) Discuss, analyze and compare those particulates (TSP and PM_2.5) annual concentration distribution trends among those Asian countries during the past two decades. (3) Test the mean concentration differences in TSP and PM_2.5 among the Asian countries during the past decades. The results indicated that the mean TSP concentration order was shown as China > Malaysia > Pakistan > India > Taiwan > Korea > Japan. In addition, the mean PM_2.5 concentration order was shown as Vietnam > India > China > Hong Kong > Mongolia > Korea > Taiwan > Japan and the average percentages of PM_2.5 concentrations for Taiwan, China, Japan, Korea, Hong Kong, Mongolia and Other (India and Vietnam) were 8, 21, 6, 8, 14, 13 and 30%, respectively, during the past two decades. Moreover, t test results revealed that there were significant mean TSP and PM_2.5 concentration differences for either China or India to any of the countries such as Taiwan, Korea and Japan in Asia during the past two decades for this study. Noteworthy, China and India are both occupied more than 60% of the TSP and PM_2.5 particulates concentrations out of all the Asia countries. As for Taiwan, the average PM_2.5 concentration displayed increasing trend in the years of 1998–1999. However, it showed decreasing trend in the years of 2000–2010. As for Korea, the average PM_2.5 concentrations showed decreasing trend during the years of 2001–2013. Finally, the average PM_2.5 concentrations for Mongolia displayed increasing trend in the years of 2004–2013.     

Comparison between urban Toronto PM and selected materials: aerosol characterization using laser ablation/ionization mass spectrometry (LAMS)

Laser ablation/ionization mass spectrometry (LAMS) of particulate matter (PM) was undertaken on-line in order to extend and contrast PM characterization. Qualitative on-line LAMS results for certified materials and Toronto source materials demonstrated the versatility and limitations of the technique. The observation of organic and inorganic components of certified materials verified the proper working condition of the in-house on-line LAMS. Organic and inorganic components of Toronto source materials were also observed with the on-line LAMS. Common components identified from both types of materials were Na, Al, Ca, Fe, and K. Other recognized components were compared with marker elements reported for some common PM emission sources. An in-house off-line LAMS was used to analyze urban Toronto PM deposited on glass substrates, while the on-line LAMS analyzed individual urban Toronto PM particles that were introduced directly into the instrument. Scanning electron microscopy (SEM), X-ray spectrometry and inductively coupled plasma atomic emission spectrometry (ICP-AES) were used for confirmatory purposes. Organic and inorganic components of urban Toronto PM at their typical ng/m3 concentrations were successfully observed in mass spectra using both off-line LAMS and on-line LAMS. Identified ions unique to each analyzed material were compared to identified ions of urban Toronto PM. The ability of LAMS to analyze individual respirable PM particles (viz. < 2 microns), both for inorganic trace elements and for organic components, greatly extended our capability to characterize PM and also to achieve estimates of concentration contributions of each material.     

Characteristics and clinical outcomes of head-injured cyclists with and without helmets in urban and rural areas of Taiwan: A 15-year study

Objective: Bicycle riding is increasingly popular in Taiwan, but the number of cyclists injured and cyclists' death rates are both increasing. The aim of this study was to investigate the different characteristics and clinical outcomes of traffic accident–related head injuries among cyclists in urban and rural areas.

Methods: Records of 812 patients (533 urban and 279 rural) admitted to 27 hospitals in Taipei City and Hualien County as the result of a traumatic head injury while bicycling between 1998 and 2013 were retrieved for study. Demographics, details about the accident, protective helmet use, and clinical outcomes were then subjected to analysis.

Results: Urban victims were more likely to be injured during morning and early evening rush hours and rural victims during the day; most urban victims were between 19 and 34 years of age and injured in the slow lane; rural victims tended to be younger or older and were injured in the fast lane (all P ≤.001). Riders who wore a helmet were less likely to suffer loss of consciousness (odds ratio [OR] = 0.31), amnesia (OR = 0.069), neurological disorders (OR = 0.205), or facial fractures (OR = 0.369). Older age, more severe head injuries, and bicycle–motor vehicle collisions influenced the severity of symptoms on admission and the residual effects at discharge.

Conclusions: Differences in the characteristics of injuries in urban and rural areas and the utilization of protective helmets may help government authorities adopt appropriate policies to promote safer and more enjoyable cycling.     

Characterization and Properties of Reactive Poly (Lactic Acid)/Ethylene–Vinyl Alcohol Copolymer Blends with Chain-Extender

A hydrophilic copolymer, ethylene–vinyl alcohol (EVOH), was incorporated into the poly(lactic acid) (PLA) matrix to improve the barrier property of PLA through twin-screw extrusion rather than the typical coextrusion process. A chain extender, poly[(ethylene)-co-(methyl acrylate)-co-(glycidyl methacrylate)] (PEMG), was used to reduce the probability of the thermal degradation of PLA during melt compounding. Biaxial stretching was used to enhance the microstructure and barrier property of PLA-PEMG/EVOH films. Experimentally, PEMG considerably reduced the probability of the thermal degradation of the PLA-PEMG sample. Biaxial stretching increased the tensile strength and decreased the value of elongation at break of the PLA-PEMG/EVOH80 (PLA/EVOH 100/80) film. Because of the efficient blending of PLA/EVOH in the twin-screw extruder, the dispersion of EVOH in the PLA matrix revealed homogeneous dispersion with a domain size of 1–5 μm. EVOH effectively improved the water vapour transmission rate (WVTR) of PLA through melt blending. Blending PLA-PEMG with EVOH substantially decreased the WVTR from 250 cc—20 μm/m²-day-atm for neat PLA to approximately 65 cc—20 μm/m²-day-atm for the PLA-PEMG/EVOH80 film, a decrease of approximately 74 % compared with neat PLA. Moreover, the WVTR decreased further from 65 cc—20 μm/m²-day-atm for the unstretched PLA-PEMG/EVOH80 film to 6.3 cc—20 μm/m²-day-atm for the film stretched at a stretch ratio of 3.5 × 3.5 and at 100 %/s, a decrease of approximately 90 % compared with neat PLA.     

Exposure and health-risk assessment of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) for sinter plant workers

This study was set out to assess polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) exposures and health-risk impact posed on sinter plant workers. One sinter plant located in southern Taiwan was selected and their workers were divided into four exposure groups based on their work tasks, including raw material charging workers, sintering grate workers, shredding workers, and others. Results show that their mean total PCDD/F and the corresponding total I-TEQ exposure levels shared the same trend as: shredding workers>others>sintering grate workers>raw material charging workers. For all selected exposure groups, their PCDD/F exposures were dominated by the particle phase contents. Congener profiles of the gaseous+particle phase PCDD/Fs were found with more fractions of high chlorinated congeners than low chlorinated congeners. The lifetime average daily doses (LADDs) and their resultant excess cancer risks (ECRs) found for sinter plant workers were higher than those residents living at the residential area and rural area, but were lower than those living at the nearby of the selected sinter plant, urban area, industrial area. Considering ECRs of the sinter plant workers were still higher than 10(-6) suggesting the need for adopting proper control measurements for reducing workers' PCDD/F exposures, particularly for those sinter zone workers.     

Assessing inhalatory and dermal exposures and their resultant health-risks for workers exposed to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists in a fastener manufacturing industry

This study first assessed workers' inhalatory and dermal exposures to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists. Then, their resultant lung cancer and skin cancer risks were estimated. Finally, control strategies were initiated from the health-risk management aspect. All threading workers in a fastener manufacturing plant were included. 16 inhalatory and 88 dermal PAH exposure samples were collected. Results show that the inhalatory gas phase total PAH exposure level (8.60x10(4) ng/m(3)) was much higher than that of particle phase (2.30x10(3) ng/m(3)). Workers' mean inhalatory exposure level (8.83x10(4) ng/m(3)) was lower, but its corresponding 1-sided upper 95% confidence level (UCL(1,95%)=1.02x10(5) ng/m(3)) was higher than the time-weighted average permissible exposure level (PEL-TWA) regulated in Taiwan for PAHs (1.00x10(5) ng/m(3)). The mean whole body total PAHs dermal exposure levels was 5.44x10(6) ng/day and the top five exposed surface areas were lower arm, hand, upper arm, neck, and head/front. The estimated lifetime skin cancer risk (9.72x10(-3)) was lower than that of lung cancer risk (1.64x10(-2)), but both were higher than the significant risk level (10(-3)) defined by the US Supreme Court in 1980. The installation of a local exhaust ventilation system at the threading machine should be considered as the first priority measurement because both lung and skin cancer risks can be reduced simultaneously. If the personal protection equipment would be adopted in the future, both respiratory protection equipment and protective clothing should be used simultaneously.     

Decomposition of SF6 in an RF plasma environment

Sulfur hexafluoride (SFd)-contained gas is a common pollutant emitted during the etching process used in the semiconductor industry. This study demonstrated the application of radio-frequency (RF) plasma in the decomposition of SF6. The decomposition fraction of SF6 [etaSF6 (C(in)-C(out))/C(in) x 100%] and the mole fraction profile of the products were investigated as functions of input power and feed O2/SF6 ratio in an SiO2 reactor. The species detected in both SF6/Ar and SF6/O2/ Ar RF plasmas were SiF4, SO2, Fe2, SO2F2, SOF2, SOF4, S2F10, S2OF10, S2O2F10, and SF4. The results revealed that at 40 W, etaSF6 exceeded 99%, and the reaction products were almost all converted into stable compounds such as SiF4, SO2, and F2 with or without the addition of oxygen. Sulfur oxyfluorides such as SO2F2, SOF2, SOF4, S2OF10, and S2O2F10 were produced only below 40 W. The results of this work can be used to design a plasma/chemical system for online use in a series of a manufacturing process to treat SF6-containing exhaust gases.     

Impact of polycyclic aromatic hydrocarbon emissions from medical waste incinerators on the urban atmosphere

In this study, polycyclic aromatic hydrocarbon (PAH) emissions from two batch-type medical waste incinerators (MWIs), one with a mechanical grate and the other with a fixed grate, both operated by a medical center, were assessed. Both MWIs shared the same air-pollution control devices (APCDs), with an electrostatic precipitator and a wet scrubber installed in series. Results show that when APCDs were used, total PAHs and total benzo[a]pyrene equivalent (total BaP(eq)) emission concentrations of both MWIs were reduced from 2220 to 1870 microg/m3 and 50 to 12.4 microg/m3, respectively. We used the Industrial Source Complex Short Term model (ISCST) to estimate the ground-level concentrations of the residential area and the traffic intersection located at the downwind side of the two MWIs. For the traffic intersection, we found both total PAHs and total BaP(eq) transported from MWIs to both studied areas were not significant. For the residential area, similar results were found when APCDs were used in MWIs. When APCDs were not included, we found that total PAHs transported from MWIs accounted for < 12%, but total BaP(eq) accounted for > 90%, of the on-site measured concentrations. These results suggest that the use of proper APCDs during incineration would significantly reduce the carcinogenic potencies associated with PAH emissions from MWIs to the residential area.     

Volatile organic profiles and photochemical potentials from motorcycle engine exhaust

This study surveyed emissions from 2- and 4-stroke new and in-use motorcycles. Emission tests were carried out on a dynamometer following the designated test procedure of the Economic Commission for Europe (ECE). Samples were derived during various driving stages, which included idle, acceleration, 30 km/hr cruise, 50 km/hr cruise, and deceleration. All test motorcycles (10 new and 15 in-use) complied with Taiwan Environmental Protection Administration's Phase III Motorcycle Emission Standards. The dominant volatile organic carbon (VOC) species were isopentane (53 and 295 mg/km, 2- and 4-stroke, respectively), 2-methylpentane (75 and 83 mg/km), 3-methylpentane (34 and 66 mg/km), and toluene (30 and 100 mg/km). The VOC emission factors for the 2-/4-stroke motorcycles were 311/344 (new) and 1479/433 (in-use) mg/km, respectively. In addition, the dominant carbonyl species for the new and in-use motorcycles were formaldehyde (0.4 and 0.7 mg/km, respectively), acetaldehyde (0.6 and 1.2 mg/km), and acetone (0.5 and 0.7 mg/km). The carbonyl compound emission factors for the 2- and 4-stroke motorcycles were 3.2/3.1 (new) and 5.3/4.6 (in-use) mg/km, respectively. The ozone formation potentials, based on an ECE test cycle, show that the values from the in-use motorcycles were higher than those from the new motorcycles. The dominant VOC species for the ozone formation potential were propylene (65 and 502 mg-O3/km, respectively), isopentane (98 and 501 mg-O3/km), 2-methylpentane (152 and 167 mg-O3/ km), 3-methylpentane (79 and 253 mg-O3/km), and toluene (127 and 398 mg-O3/km). Further, the dominant carbonyl species were formaldehyde (4.1 and 6.2 mg-O3/ km, new and in-use, respectively) and acetaldehyde (4.8 and 9 mg-O3/km).