Comparison of the expectations of residents and rescue providers of community emergency medical response after mudslide disasters

The integration of community resources is critical for emergency response. A thorough understanding of a community's requirements in advance is essential. This study examines communities that suffered mudslide disasters, and discusses expectations of the emergency medical response provided to the community from the perspectives of residents and rescue groups. The questionnaire used in the study was designed to adopt the Likert Scale for quantification purposes. Its content was divided into six categories based on emergency response. Both residents and rescue providers acknowledged that finance and reimbursement were the highest priority. Public information was regarded as the least important by both groups. Significant differences existed between the groups on patient care activities and supportive activities (P = 0.02 and 0.03, respectively), which were more appreciated by residents. We conclude that residents had higher expectations of evacuation, temporary relocation, lodging, food, and sanitary management than the rescue groups.     

Using multiple-criteria decision-making techniques for eco-environmental vulnerability assessment: a case study on the Chi-Jia-Wan Stream watershed, Taiwan

The Chi-Jia-Wan Stream watershed, located in the area of the upstream Da-Chia River in central Taiwan, is famous for slopeland agriculture and the land-locked salmon. Improper agricultural activities have caused apparent ecosystem vulnerability and sensitivity. In this study, a system that combined three watershed-based environmental indicators with multiple-criteria decision-making techniques, the Analytical Hierarchy Process, and the Preference Ranking Organization METHod for Enrichment Evaluations was developed to assess eco-environmental vulnerability. The composite evaluation index system was set up including sediment, runoff, and nutrient factors. Supported by geographic information system and K-means clustering and taking the subwatershed as the evaluation unit, the vulnerability is classified into four levels: potential, low, moderate, and high. The evaluated results show that 8.82% of subwatersheds (six subwatersheds) are in the moderately and highly vulnerable zones. These subwatersheds represent vertical-belt distribution, mainly concentrated in the right side of the studied area and near the riparian zone along the Chi-Jia-Wan Stream. The exploited farmland in the moderately and highly vulnerable zones is about 142.21 ha, occupying 75.38% of the total farmland in the studied watershed. These seriously vulnerable zones that have caused degradation in the quality of the eco-environment should be treated with more best management practices for eco-environmental rehabilitation. Additionally, the proposed model can effectively evaluate the eco-environmental vulnerability grade for reference in policy planning and ecological restoration in this area.     

Detoxification and bioregulation are critical for long-term waterborne arsenic exposure risk assessment for tilapia

Long-term metal exposure risk assessment for aquatic organism is a challenge because the chronic toxicity of chemical is not only determined by the amount of accumulated chemical but also affected by the ability of biological regulation or detoxification of biota. We quantified the arsenic (As) detoxification ability of tilapia and developed a biologically based growth toxicity modeling algorithm by integrating the process of detoxification and active regulations (i.e., the balance between accumulated dose, tissue damage and recovery, and the extent of induced toxic effect) for a life span ecological risk prediction. Results showed that detoxification rate (k _dex) increased with increasing of waterborne As when the accumulated metal exceeded the internal threshold level of 19.1 μg g^− 1. The k _dex values were comparable to or even higher than the rates of physiological loss and growth dilution in higher exposure conditions. Model predictions obtained from the proposed growth toxicity model were consistent with the measured growth data. The growth toxicity model was also used to illustrate the health condition and growth trajectories of tilapia from birth to natural death under different exposure scenarios. Results showed that temporal trends of health rates and growth trajectories of exposed fish in different treatments decreased with increasing time and waterborne As, revealing concentration-specific patterns. We suggested that the detoxification rate is critical and should be involved in the risk assessments framework. Our proposed modeling algorithm well characterizes the internal regulation activities and biological response of tilapia under long-term metal stresses.     

Dioxin contents in fly ash from large-scale MSW incinerators in Taiwan

In this study, fly ash samples were collected from three municipal waste incinerators (MWI) in Taiwan. These MWIs investigated are equipped with different air pollution control devices (APCDs). Preliminary results indicated that 2,3,7,8-PCDD/Fs homologue patterns of various types of fly ash were quite similar for all three MWIs. Concentrations of higher-chlorinated congeners of PCDDs and PCDFs were remarkably higher than those of lower-chlorinated congeners. In the case of MSW-A, the PCDD/PCDF ratios of ashes were found in the decreasing order for cyclone, boiler and baghouse. The PCDD/PCDF ratios in various types of fly ash of MWI-B was boiler-A < boiler-B < ESP < boiler-C. As for MSW-C, no obvious trend has been observed for PCDD/PCDF ratio. However, the ratio in boiler ash was higher than that in baghouse ash of MWI-A. The dioxin contents in fly ash would increase as the fly ash passed through APCD zones. In other words, the environmental conditions of APCD may actually cause the increase of the dioxin contents in fly ash. The trend for dioxin contents in fly ash collected from three MSW incinerators investigated was MSW-C < MSW-A < MSW-B.     

Partition and tempospatial variation of gaseous and particulate mercury at a unique mercury-contaminated remediation site

This study investigated the seasonal variation and spatial distribution of gaseous and particulate mercury at a unique mercury-contaminated remediation site located at the near-coastal region of Tainan City, Taiwan. Gaseous elemental mercury (GEM), particulate mercury (PTM), and dustfall mercury (DFM) were measured at six nearby sites from November 2009 to September 2010. A newly issued Method for Sampling and Analyzing Mercury in Air (National Institute of Environmental Analysis [NIEA] Method A304.10C) translated from U.S. Environmental Protection Agency (EPA) Method 10-5, was applied for the measurement of atmospheric mercury in this particular study. One-year field measurements showed that the seasonal averaged concentrations of GEM and PTM were in the range of 5.56-12.60 and 0.06-0.22 ng/m3, respectively, whereas the seasonal averaged deposition fluxes of DFM were in the range of 27.0-56.8 g/km2-month. The maximum concentrations of GEM and PTM were 38.95 and 0.58 ng/m3, respectively. The atmospheric mercury apportioned as 97.42-99.87% GEM and 0.13-2.58% PTM. As a whole, the concentrations of mercury species were higher in the springtime and summertime than those in the wintertime and fall. The southern winds generally brought higher mercury concentrations, whereas the northern winds brought relatively lower mercury concentrations, to the nearby fishing villages. This study revealed that the mercury-contaminated remediation site, an abandoned chlor-alkali manufacturing plant, was the major mercury emission source that caused severe atmospheric mercury contamination over the investigation region. The hot spot of mercury emissions was allocated at the southern tip of the abandoned chlor-alkali manufacturing plant. On-site continuous monitoring of GEM at the mercury-contaminated remediation site observed that GEM concentrations during the open excavation period were 2-3 times higher than those during the nonexcavation period.     

Applying Zonation Methods and Tabu Search to Improve the Ground‐Water Modeling1

Abstract: An optimization procedure combining zonation methods with the Tabu Search method is proposed to identify the spatial distribution of hydraulic conductivity field. Three zonation methods, Voronoi diagram (VD), multiplicatively weighted Voronoi diagram (MWVD), and pattern zonation are adopted for the parameterization purposes. With the consideration of the homogeneity and the heterogeneity, there are four spatial distributions of hydraulic conductivity designed to test whether the parameter structure can be successfully identified. The fitting residual error is first considered to determine an adequate number of zones without over parameterization. Then, the parameter uncertainty is evaluated the decision of the number of zones. The results indicate that the MWVD performs better than other two methods because the MWVD has better flexibility in describing the zonal boundaries with small number of decision variables.     

Determinations and residual characteristics of triclosan in household food detergents of Taiwan

Triclosan (2,4,4'-trichloro-2'-hydroxydiphenyl ether) is a widely used antibacterial agent. However, it was concerned recently that triclosan might act as an antibiotic and will cause resistant bacterial strains. Furthermore, possible formation of toxic chloroform was also reported when the triclosan contained in household dishwashing soaps reacted with the chlorinated water. To assess the associate risks from possible exposures, concentrations of triclosan in household food detergents of Taiwan were determined in this study. High performance liquid chromatography (HPLC) with UV detector at 280 nm was used to analyze the triclosan in samples. Factors that might affect the residual characteristics of triclosan from detergents on dishware and fruits, including the concentrations of detergents used, the temperature and immersion time for water before the cleaning processes, the temperatures of water used for the cleaning processes, and the materials of dishware made of, were evaluated under the orthogonal experiment design by the Taguchi method. By the analysis of variance, the orders of importance of different parameters were determined. The concentrations of triclosan detected in household food detergents were found to be 1.7 x 10(-2) -5.6 x 10(-1) (triclosan/detergent, mg g(-1)). For residual characteristics, the concentration of detergents used as well as the materials of dishware were found to be the significant factors that will affect the triclosan left on the dishware. On the other hand, the concentration of triclosan in the detergents was found to be the only factor that will affect the triclosan left on fruits. The maximum dose of triclosan exposures from the use of household food detergents in Taiwan was also estimated in the study.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Cytotoxicity of municipal solid waste incinerator ash wastes toward mammalian kidney cell lines

In this study, three municipal solid waste incinerator (MSWI) ash wastes-bottom ash, scrubber residue, and baghouse ash-were extracted using a toxicity characteristic leaching procedure (TCLP) extractant. These so-called final TCLP extracts were applied to African green monkey kidney cells (Vero), baby hamster kidney cells (BHK-21), and pig kidney cells (PK-15), multi-well absorption reader analysis was performed to test how the cytotoxicity of the incineration ashes would affect the digestive systems of animals. Ion-coupled plasma analyses indicated that the baghouse ash extract possessed the highest pH and heavy metal concentration, its cytotoxicity was also the highest. In contrast, the bottom ash and the scrubber residue exhibited very low cytotoxicities. The cytotoxicities of mixtures of baghouse ash and scrubber residue toward the three tested cell lines increased as the relative ratio of the baghouse ash increased, especially for the Vero cells. The slight cytotoxicity of the scrubber residue arose mainly from the presence of Cr species, whereas the high cytotoxicity of the baghouse ash resulted from its high content of heavy metals and alkali ions. In addition, it appears that the dissolved total organic carbon content of these ash wastes can reduce the cytotoxicity of ash wastes that collect in animal cells.     

Deodorization of Dimethyl Sulfide Using a Discharge Approach at Room Temperature

Abstract

The traditional technologies for odor removal of thiol usually create either secondary pollution for scrubbing, adsorption, and absorption processes, or sulfur (S) poisoning for catalytic incineration. This study applied a laboratory-scale radio-frequency plasma reactor to destructive percentage-grade concentrations of odorous dimethyl sulfide (CH₃SCH₃, or DMS). Odor was diminished effectively via reforming DMS into mainly carbon disulfide (CS₂) or sulfur dioxide (SO₂). The removal efficiencies of DMS elevated significantly with a lower feeding concentration of DMS or a higher applied rf power. A greater inlet oxygen (O₂)/DMS molar ratio slightly improved the removal efficiency. In an O₂-free environment, DMS was converted primarily to CS₂, methane (CH₄), acetylene (C₂H₂), ethylene (C₂H₄), and hydrogen (H₂), with traces of hydrogen sulfide (H₂S), methyl mercaptan (CH₃SH), and dimethyl disulfide. In an O₂-containing environment, the species detected were SO₂, CS₂, carbonyl sulfide, carbon dioxide (CO₂), CH₄, C₂H₄, C₂H₂, H₂, formal-dehyde, and methanol. Differences in yield of products were functions of the amounts of added O₂ and the applied power. This study provided useful information for gaining insight into the reaction pathways for the DMS dissociation and the formation of products in the plasmolysis and conversion processes.