Biodegradable Blends with Potential Use in Packaging: A Comparison of PLA/Chitosan and PLA/Cellulose Acetate Films

Poly(lactic acid) (PLA) is a biodegradable polymer that exhibits high elastic modulus, high mechanical strength, and feasible processability. However, high cost and fragility hinder the application of PLA in food packaging. Therefore, this study aimed to develop flexible PLA/acetate and PLA/chitosan films with improved thermal and mechanical properties without the addition of a plasticizer and additive to yield extruder compositions with melt temperatures above those of acetate and chitosan. PLA blends with 10, 20, and 30 wt% of chitosan or cellulose acetate were processed in a twin-screw extruder, and grain pellets were then pressed to form films. PLA/acetate films showed an increase of 30 °C in initial degradation temperature and an increase of 3.9 % in elongation at break. On the other hand, PLA/chitosan films showed improvements in mechanical properties as an increase of 4.7 % in elongation at break. PLA/chitosan film which presented the greatest increase in elongation at break proved to be the best candidate for application in packaging.     

ERD of Residual TCE DNAPL Achieving Nondetect from a Single Injection of Food‐Grade Waste

Residual dense nonaqueous phase liquid (DNAPL) composed of trichloroethene (TCE) was identified in a deeper interval of an overburden groundwater system at a manufacturing facility located in northern New England. Site hydrostratigraphy is characterized by two laterally continuous and transmissive zones consisting of fully‐saturated fine sand with silt and clay. The primary DNAPL source was identified as a former dry well with secondary contributions from a proximal aboveground TCE storage tank. A single additive‐injection mobilization in 2001 utilizing a food‐grade injectate formulated with waste dairy product and inactive yeast enhanced residual TCE DNAPL destruction in situ by stimulating biotic reductive dechlorination. The baseline TCE concentration was detected up to 97,400 μg/L in the deeper interval of the overburden groundwater system, and enhanced reductive dechlorination (ERD) achieved >99 percent reduction in TCE concentrations in groundwater over nine years with no evidence of sustained rebound. TCE concentrations have remained nondetect below 2.0 μg/L for the last five consecutive sampling rounds between 2013 and 2015. ERD utilizing a food‐grade injectate is a green remediation technology that has destroyed residual DNAPL at the site and achieved similar results at other residual DNAPL sites during both pilot‐ and full‐scale applications. ©2016 Wiley Periodicals, Inc.     

Use of isoperibolic calorimetry for the study of the effect of water concentration,temperature and reactor venting on the rate of hydroxylamine thermal decomposition

Hydroxylamine, NH₂OH, thermal decomposition has been responsible for two serious accidents. However, its reactive behavior and the synergy of factors affecting the rate of its decomposition are not understood. In this work, isoperibolic calorimetric measurements were performed in a metal reactor, in the temperature range 130–150 °C, employing 30–80 ml solutions containing 1.4–20 g of pure hydroxylamine (2.8–40 g of the supplied reagent). The calorimetric measurements were performed in order to assess the effects that NH₂OH concentration, temperature and reactor venting has on NH₂OH rate of decomposition. The measurements showed that increased concentration or temperature, results in faster reactions and probably higher pressure generation per mass of reactant, with concentration having a more pronounced effect. However, when both factors work synergistically the result is dramatically worse in terms of reaction rate. The pressure generation is also different, thus indicating that different reaction pathways predominate each time. Venting the produced gases in stages resulted in the highest mass loss of the solution.     

Fugitive emissions in chemical processes: The assessment and prevention based on inherent and add-on approaches

Fugitive emissions are among the major concerns of industrial process releases. The emissions cause problem to various aspects including the environment, health, and economic. Early evaluation of process hazards is beneficial because process can be made inherently benign at lower cost. This paper discusses two important aspects of fugitive emissions assessment during process design – the quantification and the prevention strategies.For the quantification part, three methods are presented for fugitive emissions estimation during the process design. They are tailored to data available in simple process flow diagram (PFD), detailed PFD, and piping & instrumentation diagram (PID). Such methods are needed as early emissions estimation allows production routes and process designs with lower emissions to be selected. The fugitive emissions estimation and methods to abatement are demonstrated on a benzene process case study. Valves are found to be the major emission source with 50% of fugitive emissions of process area in a base case of petrochemical process, in which no fugitive emission reductions are yet made. Pumps without mechanical seals come second with 30% and flanges with 8% of emissions. Inherently safer design keywords can be applied to prevent fugitive emissions in the process plants. Substitution is the most applicable keyword in fugitive emission reduction of existing plants.The emission rate calculations together with estimation of health risk give a sound background for the decision making on elimination of emissions at source through equipment and piping changes. The case study presented reveals that by substituting emission prone components by inherently low-leaking ones, the plant emissions can be reduced over 90% in practice. This is created mainly by replacing rising stem valves with ball valves, installing double mechanical pump seals or hermetic pumps and making changes in sampling and relief systems. Ideally by also changing flanges to welded connections, which is not viable for various reasons, the emissions could be reduced nearly to zero.     

Control of rumen methanogenesis

During the last decades, considerable research on methane production in the rumen and its inhibition has been carried out. Initially, as methane production represents a significant loss of gross energy in the feed (2–15%), the ultimate goal of such intervention in rumen fermentation was an increase in feed efficiency. A second reason favouring research on methane inhibition is its role in the global warming phenomenon and in the destruction of the ozone layer. In this review, the authors describe briefly several interventions for reducing methane emission by ruminants. The objective can be reached by intervention at the dietary level by ration manipulation (composition, feeding level) or by the use of additives or supplements. Examples of additives are polyhalogenated compounds, ionophores and other antibiotics. Supplementation of the ration with lipids also lowered methanogenesis. More biotechnological interventions, e.g., defaunation, probiotics and introduction of reductive acetogenesis in the rumen, are also mentioned. It can be concluded that drastic inhibition of methane production is not unequivocally successful as a result of several factors, such as: instantaneous inhibition often followed by restoration of methanogenesis due to adaptation of the microbes or degradation of the additive, toxicity for the host animal, negative effects on overall digestion and productive performance. Therefore, methanogenesis and its inhibition cannot be considered as a separate part of rumen fermentation and its consequences on the animal should be taken into account.     

Characterisation and identification of carbofuran-utilising bacteria isolated from agricultural soil

A total of 96 bacterial cultures were isolated from soil. Seventeen bacterial isolates were selected following their cultivation on solid media containing 100 mg · L^?1 carbofuran as the sole source of carbon and nitrogen. Of the 17 isolates, 10F, 11M, 17N, 23B and 26M were specifically chosen because of their relatively higher growth efficiency and genetic diversity based on Box-polymerase chain reaction analysis. These bacterial cultures had 16S rRNA gene sequences that were most similar to Acinetobacter baumannii (10F), Agrobacterium tumefaciens (11M), Ochrobactrum anthropi (17N), Escherichia coli (23B) and Agrobacterium tumefaciens (26M) with 97, 95, 93, 95 and 94% similarity in their 16S rDNA gene sequence, respectively. Degradation rates of carbofuran in soil inoculated with these isolates were 1.9, 1.5, 1.6, 1.7 and 1.6 times, respectively, faster in comparison with uninoculated soil after 10 days of incubation. The maximum degradation rates of carbofuran (45 and 91%) were detected in soil inoculated with A. baumannii (10F) after 10 and 20 days’ incubation, respectively. These data indicate that these isolates may have the potential for use in bioremediation of pesticide contaminated soil.     

Physicochemical properties of non-living water hyacinth (Eichhornia crassipes) and lesser duckweed (Lemna minor) and their influence on the As(V) adsorption processes

Eichhornia crassipes (Ec) and Lemna minor (Lm) are aquatic plants. They are considered as weeds of the water and approach being a scourge in many parts of the world, choking waterways and hindering transport upon them. At the same time they are known to readily remove heavy metal ions from water. This paper considers the use of non-living plants as novel and inexpensive biosorbent for the removal of As(V) from watersheds. In the first place they were conditioned and characterised to determine their physicochemical and surface properties and in the second place their adsorption properties for As(V) from aqueous solution were evaluated considering the toxicity of this metalloid in the environment. It describes the methodology to prepare the non-living biomasses; the physicochemical characterisation by SEM, XRD, FTIR, TGA analyses and surface characterisation of Ec and Lm by specific surface, hydration kinetic, point of zero charge determination by mass titration, active site density and XPS analysis are described. Both studied biomasses were found to be potential bio-sorbents for arsenic ions from aqueous solution. According to their efficiency to remove arsenic, they can be used in a very low cost metalloid ions removal system.     

Some aspects of heavy metals contamination remediation and role of biosurfactants

Contamination by heavy metals is the result of different industrial activities. The presence of heavy metals in soil and water causes serious problems, as these materials are not biodegradable and do contaminate both biological systems and the subsoil. Biological surface-active compounds otherwise known as biosurfactants in general and rhamnolipids biosurfactants in particular have been successfully employed in the remediation of environments contaminated with heavy metal ions. The aim of the present review is to highlight potential applications of these tensioactive compounds for use in environmental heavy metals removal and bioremediation and processes involved.     

Mesoscale circulation in the surface layer off the southern and western Sardinia Island in 2000–2002

Five oceanographic cruises were organized in the Sardinian Sea and Channel in May 2000, March 2001, September 2001, May 2002, and November 2002 to study the characterization of the water masses, Atlantic Water (AW) and Winter Intermediate Water (WIW), and their mesoscale variability. In the Sardinian Channel, an Algerian anticyclonic Eddy (AE) was observed in May 2000, along the Tunisian coast. This induced a greater minimum salinity in a wider and deeper layer than in November 2002, when no AE was observed. Some WIW was observed below it; nevertheless, no link could be established between AEs and WIW occurrences. In the Sardinian Sea, two AEs were observed during spring 2000, and a further two during spring 2002. One AE strongly influenced shelf circulation, in contrast to the other three that were off the continental slope. In the same area, during the end of September 2001, a vertical salinity inversion occurred in the first 30–50 m of depth over the whole sampling field, and a W–NW wind induced a coastal upwelling over the western Sardinian coast (south of 41° N). This upwelling increased the salinity from ～20 to 30 m below the surface to the surface and, thereby led to a lower salinity close to the coast than offshore. This was in contrast to a classical upwelling. Consequently, in the Sardinian Sea, the general circulation, mainly driven by AEs, can meet the coastal wind-driven circulation.     

Sea-water seasonal changes at a heavy tourism investment site on the Jordanian northern coast of the Gulf of Aqaba,Red Sea

The Gulf of Aqaba exhibits a strong seasonality due to convective mixing during winter and stratification during summer. The present study provides a detailed appraisal of summer and winter sea-water characteristics at the northern coast of the Gulf of Aqaba, that is witnessing rapid development and increasing changes in its geomorphological characteristics. Sea-water temperature, salinity, nutrients, and chlorophyll a concentrations were measured biweekly at five coastal and four cross-sectional stations during the periods February to April and July to September 2004. Meteorological conditions were continuously recorded at the Marine Science Station. The coastal study sites included four open coastal stations and a marina with one-way exchange with the open water. The effect of convective mixing was clearly apparent on the sea-water characteristics. Natural seasonal characteristics of higher nutrients and chlorophyll a concentrations were recorded during winter at most of the open coastal stations. In the cross-sectional stations, the concentrations of nutrients and chlorophyll a were not different between the surface and the bottom during winter, but the bottom waters had generally higher concentrations during summer. Some deviations from the natural seasonal cycle were recorded at the marina and other coastal stations. Here, higher nutrient and chlorophyll a concentrations were recorded in summer than in winter. These deviations that are most likely due to anthropogenic effects are discussed.