Management of sustainability transitions through planning in shrinking resource city contexts: an evaluation of Yubari City,Japan

This paper evaluates the planning competences required to enact a managed transition to sustainability at the municipal level for cities facing population, economic and employment decline. Drawing on the ‘shrinking cities’ literature, we argue consolidation of the built environment can become a focal point for sustaining citizen welfare when transitioning cities that are facing decline, especially those previously reliant on resource industries. We evaluate the former coal mining city of Yubari, Japan, which is developing a consolidated urban form with the aim of creating a ‘sustainable’ future city. Findings from interviews and content analysis of Yubari’s planning policy indicate, however, that to translate ‘shrinking’ a city into a managed transition, spatial planning must be accompanied by a wider range of social policy measures and strong cross-sectoral engagement. We also caution that the unique geographical and political context of Yubari mean its model may not be directly replicable in other contexts.     

Nitrate controls methyl mercury production in a streambed bioreactor

Organic carbon bioreactors provide low-cost, passive treatment of a variety of environmental contaminants but can have undesirable side effects in some cases. This study examines the production of methyl mercury (MeHg) in a streambed bioreactor consisting of 40 m3 of wood chips and designed to treat nitrate (NO?) in an agricultural drainage ditch in southern Ontario (Avon site). The reactor provides 30 to 100% removal of NO?-N concentrations of 0.6 to 4.4 mg L(-1), but sulfate (SO?(2-)) reducing conditions develop when NO? removal is complete. Sulfate reducing conditions are known to stimulation the production of MeHg in natural wetlands. Over one seasonal cycle, effluent MeHg ranged from 0.01 to 0.76 ng L(-1) and total Hg ranged from 1.3 to 3.4 ng L(-1). During all sampling events when reducing conditions were only sufficient to promote NO?(-) reduction (or denitrification) ( = 5, late fall 2009, winter 2010), MeHg concentrations decreased in the reactor and it was a net sink for MeHg (mean flux of -5.1 μg m(-2) yr(-1)). During all sampling events when SO?(2-) reducing conditions were present ( = 6, early fall 2009, spring 2010), MeHg concentrations increased in the reactor and it was a strong source of MeHg to the stream (mean flux of 15.2 μg m(-2) yr(-1)). Total Hg was consistently removed in the reactor (10 of 11 sampling events) and was correlated to the total suspended sediment load ( r2 = 0.69), which was removed in the reactor by physical filtration. This study shows that organic carbon bioreactors can be a strong source of MeHg production when SO?(2-) reducing conditions develop; however, maintaining NO?-N concentrations > 0.5 mg L suppresses the production of MeHg.     

Predicting the contents of BTEX and MTBE for the three types of tollbooth at a highway toll station via the direct and indirect approaches

This study was set out to assess the contents of five volatile organic compounds (VOCs), including BTEX (the acronym for benzene, toluene, ethylbenzene, and xylene) and methyl tertiary-butyl ether (MTBE), in three types of tollbooth (including the car lane/ticket-collecting, car lane/cash-collecting, and bus/truck lane tollbooths) at a highway toll station via the direct and indirect approaches. For the direct approach, VOC samples were collected from the breathing zone of booth attendants at all selected tollbooths during the three workshifts. For samples collected during the dayshift, we found VOC contents of BTEX and MTBE in both the car lane/ticket-collecting (=6.23, 21.93, 3.24, 8.56, and 5.63 ppb, respectively) and car lane/cash-collecting tollbooths (=5.98, 21.71, 3.25, 8.59, and 6.04 ppb, respectively) were quite comparable, but both were significantly higher than that in the bus/truck lane tollbooth (=3.13, 13.91, 2.05, 4.52, and 2.70 ppb, respectively). The same pattern can also be found for the other two workshifts. For the indirect approach, we conducted multivariate regression analyses to predict VOC contents for any given type of tollbooth by using the four independent variables of the vehicle flowrate, wind speed, relative humidity, and air temperature. We found that, except the vehicle flowrate, the other three factors did not have a significant effect on VOC contents in the three types of tollbooth. In addition, the magnitudes of the effect of the vehicle flowrate on VOC contents for the three types of tollbooth were: car lane/cash-collecting>bus/truck lane>car lane/ticket-collecting. All regression results yielded R²-values in the range of 0.41−0.74 indicating that the developed indirect approach was able to predict VOC contents for three types of tollbooth.     

SPECTRAL ANALYSIS OF TIDAL FLUCTUATIONS IN GROUND WATER LEVEL1

ABSTRACT: Water level data at 16 ground water wells and two sea water gauging stations, coupled with barometric measurements in an alluvial plain in the central‐west region of Taiwan, are analyzed using spectral analysis in the time and frequency domains. The semi‐diurnal component from water level station is observed to be the most noticeable signal while the diurnal component is the less distinct signal recorded at the water level stations. Both semidiurnal and diurnal components are coupled with atmospheric pressure measurements. From the atmospheric pressure data, spectral analysis indicates that both the raw and the pressure adjusted water levels are almost in phase and retain the same amplitude in this area. It implies that the effect of pressure variations is not significant for the sea water and ground water level nearby; the astronomical tidal components, as expected, are the main factor causing fluctuation of ocean water and ground water levels in the Choshuihsi alluvial plain.     

Decomposition of SF6 in an RF Plasma Environment

Abstract

Sulfur hexafluoride (SF₆)-contained gas is a common pollutant emitted during the etching process used in the semiconductor industry. This study demonstrated the application of radio-frequency (RF) plasma in the decomposition of SF₆. The decomposition fraction of SF₆ [η_SF6 (C_in–C_out)/C_in x 100%] and the mole fraction profile of the products were investigated as functions of input power and feed O₂/SF₆ ratio in an SiO₂ reactor. The species detected in both SF₆/Ar and SF₆/O₂/Ar RF plasmas were SiF₄, SO₂, F₂, SO₂F₂, SOF₂, SOF₄, S₂F₁₀, S₂OF₁₀, S₂O₂F₁₀, and SF₄. The results revealed that at 40 W, η_SF6 exceeded 99%, and the reaction products were almost all converted into stable compounds such as SiF₄, SO₂, and F₂ with or without the addition of oxygen. Sulfur oxyfluorides such as SO₂F₂, SOF₂, SOF₄, S₂OF₁₀, and S₂O₂F₁₀ were produced only below 40 W. The results of this work can be used to design a plasma/chemical system for online use in a series of a manufacturing process to treat SF₆-containing exhaust gases.     

Simultaneous Sampling of Gas- and Aerosol-Phase TDI with a Triple Filter System

Abstract

A new triple filter system sampler/model is proposed for the precise and accurate simultaneous sampling and determination of gas- and aerosol-phase 2,4-toluene diisocyanate (TDI). The system consists of two front Teflon filters for sampling aerosol-phase TDI and a final coated glass fiber filter to collect gas-phase TDI. The aerosol-phase TDI is collected on the first Teflon filter, while the second Teflon filter is used to estimate gaseous TDI adsorbed by the first. According to the gas adsorption test of two Teflon filters in series, the TDI gas adsorption fraction of the two filters is almost the same. Results of the evaporation test using pure TDI aerosols collected on the Teflon filter show that significant evaporation of the compound does not occur during sampling. These two findings allow the use of a model to estimate accurate gasand aerosol-phase TDI concentrations. The comparison test with an annular denuder shows that the triple filter system can minimize the TDI sampling bias between the dual filter and the annular denuder systems.     

Development of regenerative dye impregnated mesoporous silica materials for assessing exposure to ammonia

The mesostructured materials MCM-41 and SBA-15 were studied as possible supports of bromocresol green (BG) dye impregnation for the ammonia gas detection because of their large surface area, high regenerative property, and high thermal stability. X-ray diffraction, transmission electron microscopy, scanning electron microscope, and N2 adsorption analysis were used to characterize the prepared materials. These materials could sense ammonia via visible color change from yellowish-orange to blue color. The color change process of the nanostructured materials was fully reversible during 10 cyclic tests. The results indicated that the ammonia absorption responses of the two nanostructured materials were both very sensitive, and high linear correlation and high precision were achieved. As the gaseous ammonia concentrations were 50 and 5 ppmv, the response times for the SBA-15/BG were only 1 and 5 min, respectively. Moreover the BG dye-impregnated SBA-15 was less affected by the variation in the relative humidity. It also had faster response for the detection of NH3, as well as lower manufacturing price as compared to that of the dye-impregnated MCM-41. Such feature enables SBA-15/BG to be a very promising material for the detection of ammonia gas.     

Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization

Heavy metals in the surface soils from lands of six different use types in one of the world’s most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma–mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2?×?10⁴ km²) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas?>?waste disposal/treatment sites?～?industrial areas?>?agricultural lands?～?forest lands?>?water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.     

Occurrence of diarrheagenic Escherichia coli genes in raw water of water treatment plants

Purpose

The high incidences of waterborne diseases are frequently associated with diarrheagenic Escherichia coli (DEC). DEC may pose a health risk to people who contact surface water for recreation or domestic use. However, there is no published report on the monitoring of DEC in drinking water sources in Taiwan. In this study, the occurrence of DEC genes in raw water for water treatment plants in Taiwan was investigated.

Method

Raw water samples were taken from water treatment plants adjacent to the Kaoping River in southern Taiwan. Each water sample was treated with membrane filtration followed by DNA extraction from the concentrate and concentrate enrichment, respectively. The target genes for various DEC strains of genes were identified, including enteroaggregative E. coli (EAEC), enterohemorrhagic E. coli (EHEC), enteroinvasive E. coli (EIEC), enteropathogenic E. coli (EPEC), and enterotoxigenic E. coli (ETEC).

Results

Among 55 water samples analyzed, DEC genes were detected in 16 (29.1%) samples. Strain-specific genes for EAEC, EHEC, EIEC, and EPEC were found in the percentages of 3.6%, 10.9%, 9.1%, and 9.1%, respectively. The specific gene for ETEC is not detected in the study. By looking at the presence/absence of specific genes and water sample characteristics, water temperature was found to differ significantly between samples with and without EHEC gene. In addition, pH levels differed significantly for EHEC and EPEC presence/absence genes, and turbidity was significantly different for water with and without EPEC genes.

Conclusion

DEC genes were detected in 29.1% of the raw water samples in the study location. The potential health threat may be increased if the treatment efficiencies are not properly maintained. Routine monitoring of DEC in drinking water sources should be considered.     

Disinfection by-product formation and mutagenic assay caused by preozonation of groundwater containing bromide

Brominated organic and inorganic by-products are generated during ozonation of groundwater containing high bromide concentrations. This study measured concentrations of bromate, bromoform, bromoacetic acids, bromoacetonitriles, bromoacetone, 2,4-dibromophenol and aldehyde generated by ozonation. The potential mutagenicity of ozonated waters was assessed using the Ames and Microtox tests. Test results for the 18 ozonated groundwater samples demonstrate that bromate formation is associated with high pH, bromide and alkalinity content, low levels of dissolved organic carbon (DOC) and ammonia, and low alkalinity. Brominated organic by-products were correlated with high bromide ion and natural organic matter content, and low ammonia concentrations. The Ames test results demonstrate that all extracts from ozonated water have mutagenic activity; however, the 18 raw groundwater samples had no mutagenicity. The Microtox test results also show that the ozonated water samples were highly toxic. Generally, both bromide and DOC content promoted the formation of ozonation by-products and mutagenicity. Controlling of bromide and DOC concentrations is an effective method of reducing potential by-product formation and eliminating mutagenicity problems associated with groundwater ozonation.