Release of uranium from rock matrix--a record of glacial meltwater intrusions?

Uranium release observed in a rock matrix around water-carrying fractures was studied using U-series disequilibrium (USD) modelling and mass balance calculations. Several release scenarios were tested, with specific attention to the glacial aspects. The release appears to have occurred in two or three violent episodes during the last 300 ky. A release after the last glaciation can be excluded on mass flow grounds. Continuous release for more than 300 ky can be excluded on radioactive disequilibrium grounds. Repeated inflows of oxic glacial meltwater seem to have triggered the release episodes.     

Lead and zinc bioavailability to Eisenia fetida after phosphorus amendment to repository soils

Four phosphorus forms were investigated as potential soil amendments to decrease the bioavailability of Pb and Zn in two repository soils to the earthworm, Eisenia fetida. Treatments were evaluated by examining differences in bioaccumulation factors between amended and non-amended soils. Triple super phosphate at 5000 mg P/kg decreased both Pb and Zn bioavailability in both soils. Rock phosphate at 5000 mg P/kg decreased Zn bioavailability, but not Pb bioavailability in both repository soils. Monocalcium phosphate and tricalcium phosphate at 5000 mg P/kg did not significantly decrease Pb or Zn bioavailability to earthworms in either repository soil. In order to optimize phosphorus amendments, additional phosphorus (up to 15,000 mg P/kg) and lowered pH were used in a series of tests. The combination of lowering the pH below 6.0 and increasing phosphorus concentrations caused complete mortality in all triple super phosphate amended soils and partial mortality in the highest rock phosphate amended soils. Results indicate that triple super phosphate and rock phosphate are viable soil amendments, but care should be taken when optimizing amendment quantity and pH so that adverse environmental effects are not a by-product.     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-boreal zone: case Finland

The majority of untouched natural boreal forests have been regenerated through large catastrophes, occurring by intervals between 50 and 100 years. Storm and fire will open the landscape, result in a huge amount of dead or dying trees and let the pioneer tree species germinate. These processes are the guideline for Finnish forest management today.The main focus by maintaining the biodiversity in Finnish boreal forest zone is directed to managed forests. Nature-orientated silviculture on stand level is practised. The site type classification, a reflection of the modern concept of biodiversity and developed by Cajander early in 1900s, on the basis of natural vegetation composition of the site, has the central role by choosing tree species, regeneration methods and thinning procedure, and reflects also on the site productivity. The small size of stands, the abundance of natural seedlings in planted stands and the popularity of mixed stands have a positive impact on biodiversity of forests. The protection of small-sized valuable habitats in commercially managed stands, the leaving of retention trees standing and lying in the forest in all phases of the rotation, are activities made for biodiversity. Many insects and fungi are adapted to catastrophes and so they can survive in single stems left on regeneration areas. Maintaining the biodiversity in multifunctional forests is also supported by the new forest legislation and by the criteria of Finnish Forest Certification System.     

The Use of a Simple Air Quality Index in the Helsinki Area, Finland

2 (1 and 24 h), SO₂ (1 and 24 h), O₃ (1 h) and PM₁₀ (24 h). The AQI is linked to the new air quality guidelines in Finland. The AQI is based on acute health effects, but long-term effects on nature and materials are also taken into consideration. Subindices are calculated hourly for all pollutants and for a given hour the highest subindex becomes the AQI. AQI values are currently calculated for the center of Helsinki and for typical suburban areas.     

Ensemble Modeling of the Baltic Sea Ecosystem to Provide Scenarios for Management

We present a multi-model ensemble study for the Baltic Sea, and investigate the combined impact of changing climate, external nutrient supply, and fisheries on the marine ecosystem. The applied regional climate system model contains state-of-the-art component models for the atmosphere, sea ice, ocean, land surface, terrestrial and marine biogeochemistry, and marine food-web. Time-dependent scenario simulations for the period 1960–2100 are performed and uncertainties of future projections are estimated. In addition, reconstructions since 1850 are carried out to evaluate the models sensitivity to external stressors on long time scales. Information from scenario simulations are used to support decision-makers and stakeholders and to raise awareness of climate change, environmental problems, and possible abatement strategies among the general public using geovisualization. It is concluded that the study results are relevant for the Baltic Sea Action Plan of the Helsinki Commission.     

Long-term environmental monitoring for assessment of change: measurement inconsistencies over time and potential solutions

The importance of long-term environmental monitoring and research for detecting and understanding changes in ecosystems and human impacts on natural systems is widely acknowledged. Over the last decades, a number of critical components for successful long-term monitoring have been identified. One basic component is quality assurance/quality control protocols to ensure consistency and comparability of data. In Norway, the authorities require environmental monitoring of the impacts of the offshore petroleum industry on the Norwegian continental shelf, and in 1996, a large-scale regional environmental monitoring program was established. As a case study, we used a sub-set of data from this monitoring to explore concepts regarding best practices for long-term environmental monitoring. Specifically, we examined data from physical and chemical sediment samples and benthic macroinvertebrate assemblages from 11 stations from six sampling occasions during the period 1996–2011. Despite the established quality assessment and quality control protocols for this monitoring program, we identified several data challenges, such as missing values and outliers, discrepancies in variable and station names, changes in procedures without calibration, and different taxonomic resolution. Furthermore, we show that the use of different laboratories over time makes it difficult to draw conclusions with regard to some of the observed changes. We offer recommendations to facilitate comparison of data over time. We also present a new procedure to handle different taxonomic resolution, so valuable historical data is not discarded. These topics have a broader relevance and application than for our case study.     

Urea as a PCDD/F Inhibitor in Municipal Waste Incineration

ABSTRACT

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from municipal waste incineration have been widely studied because of their extensive toxicity, and many efforts have been made to restrict their emissions. Although a number of chemical compounds have been shown in laboratory-scale tests to inhibit the formation of PCDD/Fs, few have been tested in pilot- or full-scale plants. This work evaluates the effect of urea as a PCDD/F inhibitor in a pilot-scale incinerator that uses refuse-derived fuel (RDF). The decomposition of urea under the test conditions was also studied using detailed kinetic modeling. An aqueous solution of urea was injected into the flue gas stream after the furnace at ~730 °C, with varied urea concentrations and flue gas residence times used between the furnace and the sampling point. The results demonstrate that urea can successfully inhibit PCDD/F formation in waste incineration if concentrations and injection points are properly adjusted. The kinetic model showed that urea can be rapidly decomposed under appropriate flue gas conditions, indicating that in addition to the urea molecule itself, decomposition products of urea can also be responsible for the reduction of PCDD/F production during incineration.     

Effects of iron(III)chelates on the solubility of heavy metals in calcareous soils

In this study I evaluated the effects of complexing agents on the solubility of heavy metals in an incubation experiment up to 56 days when complexing agents were applied as Fe-chelates (Fe-EDDS(S,S), Fe-EDDS(mix), Fe-EDTA and Fe-EDDHA) on calcareous soils at a level sufficient to correct Fe chlorosis (0.1 mmol kg⁻¹). Of these ligands, EDDHA was the most efficient in keeping Fe in water-soluble form, and EDDS increased the solubility of Cu and Zn most, and only EDTA increased the solubility of Cd and Pb. EDTA increased the solubility of Ni steadily during the incubation period, equalling about 5-8% of the added EDTA concentration. [S,S]-EDDS was biodegraded within 56 days, whereas EDDS(mix) was less biodegradable. Ni-chelates were the most recalcitrant against biodegradation. The study shows that even a moderate input of chelates to soil increases the solubility of toxic heavy metals and their risk of leaching.     

Landsat ETM+ Images in the Estimation of Seasonal Lake Water Quality in Boreal River Basins

We investigated the use of Landsat ETM+ images in the monitoring of turbidity, colored dissolved organic matter (CDOM), and Secchi disk transparency (Z(SD)) in lakes of two river basins located in southern Finland. The ETM+ images were acquired in May, June, and September 2002 and were corrected for atmospheric disturbance using the simplified method of atmospheric correction (SMAC) model. The in situ measurements consisted of water sampling in the largest lake of the region, routine monitoring results for the whole study area, and Z(SD) observations made by volunteers. The ranges of the water quality variables in the dataset were as follows: turbidity, 0.6-25 FNU; absorption coefficient of CDOM at 400 nm, 1.0-12.2 m(-1); Z(SD), 0.5-5.5 m; and chlorophyll a concentration, 2.4-80 mug L(-1). The estimation accuracies of the image-specific empirical algorithms expressed as relative errors were 23.0% for turbidity, 17.4% for CDOM, and 21.1% for Z(SD). If concurrent in situ measurements had not been used for algorithm training, the average error would have been about 37%. The atmospheric correction improved the estimation accuracy only slightly compared with the use of top-of-atmospheric reflectances. The accuracy of the water quality estimates without concurrent in situ measurements could have been improved if in-image atmospheric parameters had been available. The underwater reflectance simulations of the ETM+ channel wavelengths using water quality typical for Finnish lakes (data from 1113 lakes) indicated that region-specific algorithms may be needed in other parts of the country, particularly in the case of Z(SD). Despite the limitations in the spectral and radiometric resolutions, ETM+ imagery can be an effective aid, particularly in the monitoring and management of small lakes (<1 km(2)), which are often not included in routine monitoring programs.