Polychlorinated biphenyls in marine sediments from the southern North Sea and Scheldt estuary: a ten-year study of concentrations, patterns and trends

The paper reports the concentrations and patterns of CBs in sediments of the Belgian part of the southern North Sea and the Scheldt estuary for the period 1991-2001. The long-term analytical performance was well within the quality assurance boundaries set at the outset of the study and is consistent with the state of the art for this type of analysis. The CB concentrations (given as the median of the sum of IUPAC Nos 28, 52, 101, 118, 138, 153 and 180) vary between 0.1 microg kg(-1) and 50 microg kg(-1) dry weight in the total sediment and it could be demonstrated that CB patterns in the fine fraction of the sediment were closely similar throughout the investigated area. Isolation of the fine fraction (<63 microm) by sieving can be regarded as a physical normalisation to reduce the differences in sediment granulometric composition. It allows for a better understanding of CB distribution and patterns and improves the trend analysis. A significant downward trend could not be found at any of the stations, which suggests that CB levels have not been changing in the area of interest in the past decade.     

Mathematische Modelle zur Effektabschätzung

The extrapolation from single-species toxicity data to ecosystem thresholds is one of the principal problems in ecological risk assessment. The common statistical methods are briefly presented prior to a brief trial application of simulation models. A method for calculating ecosystem thresholds for different end points using Monte-Carlo simulations is applied to a data set of eight substances and subsequently compared with statistical approaches. Finally, a comparison of the pros and cons of such simulation models for extrapolation is presented.     

环境中的药物——LC-MS/MS分析地表水和地下水

成百上千的活性物质正被用于人药和兽药处方中.由于药物的广泛应用,它们的残留物可通过多种途径进入环境.虽然主要通过尿和粪便的排泄,但是药品生产中的排放也应被考虑.当抗生素用于水产业,就会产生更直接的影响.污水处理设备不能完全除去药物,因此药物会出现在地表和地下水样品中.近年来,人们对环境中药物的兴趣正在增加,需要建立一种快速、灵敏、有选择性的方法来分析水样.     

Testing biodegradability with standardized methods

Laboratory test methods are used by industry laboratories to determine biodegradability, an important parameter for the evaluation of the ecological behaviour of substances. Biodegradability has a key role due to the simple fact that a degradable substance will cause no long term risk in the environment. The great variety of biodegradation processes in the natural environment and in technical plants for treating waste water and solid wastes gave rise to a rather large number of test methods based on different test principles. To guarantee the acceptance of the test results by authorities and customers internationally standardized methods (ISO, OECD) and established quality criteria (GLP, EN 45000, ISO 9000) are used.     

Characterization of bacterial contaminants in the air of a duck hatchery by cultivation based and molecular methods

Today's large-scale poultry production is often accompanied by high concentrations of airborne microorganisms at working places. However, the microbial communities in those bioaerosols are rarely characterised. In this study, we investigated the bacterial population in bioaerosols from a duck hatchery by both cultivation based and molecular methods and compared the results. Depending on used media, concentrations of airborne culturable bacteria varied between 6 × 10(1) and 7 × 10(6) CFU per m(3) air. The corresponding total cell count of DAPI stained cells was 2 × 10(7) cells per m(3) air. 16S rRNA gene analyses of bacterial isolates and clone libraries revealed a low species richness in hatcheries air, respectively. More than 50% of bacterial isolates were phylogenetically most closely related to bacterial species of the risk group 2 (German TRBA). The sequence composition in clone libraries supported the result of cultivation based approaches, whereby sequences assigned to Staphylococcus, Acinetobacter and Enterococcus are the most common. The high concentration of airborne bacteria which are most closely related to species of potential health risk requires further detailed investigations for these bacterial species.     

Prüfung der Auswirkungen von Pflanzenschutzmitteln auf Laufkäfer

The testing procedure for the effects of pesticides on carabid beetles is described and examples are given for important factors, e.g. temperature, type of soil, testing method and physiology of the test animal, which can influence the results of such tests. Risk assessment for pesticides, therefore, has to be carried out by experts. Additionally, a monitoring of effects should be carried out after the registration process in certain cases.     

Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other organic micropollutants were determined in dated sediment/soil cores collected from the flood-plain of the river Elbe near Pevestorf (PT), approximately 125 km upstream of Hamburg, and Heuckenlock (HL) in southeast of Hamburg. Concentrations of PCDD/Fs peaked sharply at PT in the 1950s and at HL at the end of the 1940s. Cluster analyses provide evidence that the region of Bitterfeld-Wolfen (about 350-400 km upstream of Hamburg) could be the source of the PCDD/F contamination existing in the cores PT and HL since the 1940s. Obviously it is caused by sediments of the river Elbe of a similar composition. Whereas the PCDD/Fs, HCHs (hexacyclohexane isomers), DDX (DDT, DDD, DDE), and tetrachlorinated ethers in PT and HL presumably originated predominantly from the Bitterfeld-Wolfen region, organotin compounds in HL and dichlorinated haloethers in HL during the 1940s and 1950s can probably largely be attributed to emissions from the Hamburg region. Although they are separated by a large distance, in both sediment cores PT and HL concentrations and composition patterns of most organic micropollutants analyzed widely match. Inductively it can be concluded that similar contaminations will be found in many of the river bank soils between the Bitterfeld-Wolfen region and Hamburg. Excavation of top soils may uncover highly contaminated materials. Since the dated sediment cores show the variation in contaminants in the Elbe sediments over a defined time period, it is possible to make an approximate assessment of the actual degree of contamination to be expected in areas where in previous decades contaminated dredged sediments from the Elbe and from the Port of Hamburg have been deposited on land and used for building plots or for agricultural purposes.     

Biodegradability and compostability of polymers—test methods and criteria for evaluation

The treatment of solid waste in controlled composting facilities is an important possibility for reducing garbage. Natural and synthetic polymeric materials can be used for many purposes, for example, as packaging materials, where compostability is required. A prerequisite for official regulations and the decision as to which materials may be composted is investigations on their biodegradability and the quality of the compost produced. Several standardization groups at the ISO, CEN, and DIN are developing definitions, test methods, and classification systems for differentiating compostable from noncompostable materials. The concept which will be standardized and used in Germany is described in detail. It includes characterization of the test material, determination of the biodegradability using laboratory tests such as simple aquatic batch tests and a controlled aerobic composting test, investigation of the disintegration of the test material in industrial or bench-scale composting facilities, and finally, chemical and ecotoxicological analysis of the compost produced.     

Quecksilbergasfeinreinigung mittels metall- und salzpartikelbelegter Trägermaterialien (G/S-Reaktor) Ökotoxizität von Quecksilber und seiner Verbindungen

Waste and process gases from thermal power and metallurgical plants or such products from alkali-chloride industries contain metallic, inorganic and organic mercury. Widespread processes applied to remove the greatest amount of mercury are absorption and adsorption. Caused by the lowering of the emission limit from 200 to 50 μg/m³ [STP] by national and European legislators, considerable efforts have been made to enhance the efficiency of the main separation units of flue gas cleaning plants by applying the appropriate technological measures. This article is focused on the removal of mercury from waste gases. The state of engineering is described, especially with regard to enhancing the efficiency of separation in the raw gas, in wet, dry and quasi-dry processes as well as in tail-end process units. Specially impregnated ceramic carriers can be used for the selective separation of metallic, inorganic and organic mercury. Amalgamation has been investigated as a possible separation mechanism both experimentally and in theory. Using the ceramic reactor, removal rates for gaseous mercury and its compounds can be achieved which are even lower than 50 μg/m³ [STP]. The technology, the separation mechanisms and the ecological advantages through the use of ceramic reactors are presented in the article as well.