荧光法研究DNA与蒽相互作用机理

利用荧光猝灭光谱和紫外-可见吸收光谱研究了体外DNA对蒽的荧光猝灭机理.结果表明,DNA的紫外-可见光谱没有发生红移现象,通过计算分析不同温度下的荧光猝灭常数和热力学参数,结合两种光谱分析可知DNA对蒽的荧光猝灭属于动态猝灭机理.     

ClO2三相催化氧化处理硝基苯生产废水的试验

硝基苯(NB)生产废水中含有大量NB及其衍生物,对生物具有毒性,属难生物降解物质.采用ClO2三相催化氧化工艺对NB废水进行处理.结果表明,每升废水投加280、350 mg ClO2,废水在活性炭加载含铜复合金属氧化物的催化剂床层停留56min,NB和色度的去除率均达到95%以上,COD去除率达到90%以上.吨废水处理成本约为10.5元.     

混合重金属对硝化颗粒污泥毒性作用的析因实验研究

分别测定了Cu2 、Zn2 和Cd2 对硝化颗粒污泥的单一毒性,采用析因实验研究了二元和三元重金属混合体系对硝化颗粒污泥的联合毒性.结果表明,Cu2 、Zn2 和Cd2 的2 h半抑制浓度EC50分别为95.23、62.11和12.48 mg/L,由析因实验所得的响应曲面模型具有较好的优度(其R2＞0.95),能够对混合体系的联合毒性很好地进行预测,析因实验可以用于环境领域混合体系联合毒性的研究.     

遥感技术在现代环境监测与环境保护中的应用

现代环境监测已经发展到环境质量监测为主的整体预防性监测,全球环境保护的国际性、跨学科及综合性性质,使得包括遥感在内的“3S”技术在区域环境质量监测和全球性的重大环境问题研究方面广泛应用。本文介绍了遥感技术在全球气候监测、水环境监测和大气污染监测等方面的应用实例,指出遥感技术应与地面监测紧密结合,进一步加强对环境资源的动态监测。     

北京市铁路站场大气颗粒物的特征与来源分析

利用扫描电镜-X射线能谱(SEM-EDX)技术对北京市铁路站场采集的颗粒物的形貌和化学组分进行分析,并利用富集因子法及元素相关性对颗粒物中的各元素来源进行判别。研究结果表明,铁路站场所采集的主要是2μm以下的球形或椭球形富含S、Br、Zn元素的颗粒,富集因子及元素相关性分析显示,该颗粒物主要来源于铁路机车燃油排放。因此,确定颗粒物的排放源并以此进行控制,对于改善北京铁路站场周围的大气环境具有重要意义。     

城市污水雌激素活性研究进展——毒性评估、致毒物解析及毒性削减

城市污水成分复杂,含有多种有毒有害物质,使其能对生物体产生各种不良生物效应,其中,内分泌干扰物,尤其是雌激素类物质以及具有雌激素活性的污染物,因能影响生物的生殖系统并造成受纳水体鱼类性别转变等危害而备受关注,城市污水的雌激素活性也一直是污水处理领域的研究热点.当前,城市污水回用是缓解全球水资源危机的重要途径之一,在此背...     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

VOCs在线监测远程质量控制可行性研究

地表水水质自动监测要求对主要监测指标具备远程质量控制功能,而对挥发性有机物（VOCs）在线监测没有明确要求。采用自行设计的标准溶液储存装置和一套吹扫捕集-气相色谱-氢火焰离子化检测器/电子捕获检测器（P＆C-GC-FID/ECD）在线监测系统对水中19种VOCs组分开展了远程标准溶液测试。结果表明,19种VOCs组分在线加标回收率为88.8%～103.8%,在线多点线性测试相关系数为0.995 9～0.999 7,连续16 d标准溶液测试的示值误差范围为-18.91%～21.91%;VOCs在线监测系统远程质量控制是可行的,可实时监控仪器性能,有效预警预报水质状况。     

Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Experimental oxidative dissolution of sphalerite in the Aznalcollar sludge and other pyritic matrices

After the collapse on 25 Apr. 1998 of the Aznalcóllar mine tailings dike in southwestern Spain, 45 km2 of the Guadiamar valley were covered by a pyritic sludge containing up to 2% sphalerite (ZnS). Later, the sludge was mechanically removed and calcium carbonate was plowed into the soil to immobilize heavy metals. By June 2001 more than 60% of the sulfides in the residual sludge had oxidized and soil Zn contents reached locally phytotoxic levels. Therefore, the oxidative dissolution of sphalerite in the sludge and other pyritic samples was examined. Flow-through oxidation experiments showed that: (i) about 5 and 17% of the sludge Fe and Zn were in soluble form, respectively, because the sludge sample had been partly oxidized in the field; (ii) the oxidation rates of the residual pyrite and sphalerite were similar; (iii) the overall sulfide oxidation rate was relatively unaffected by the addition of calcite; and (iv) poorly crystalline Fe (hydr)oxides containing Zn in occluded form and Zn (hydroxi)carbonates were formed in the presence of calcite. The rate of oxidation of reference sphalerite greatly increased when it was incorporated in the sludge or in a reference pyrite matrix. This enhancement was due to galvanic interaction because pyrite oxidation was depressed in the presence of sphalerite. Oxidation by Fe3+ ions was less important because the oxidation rates of native sphalerite were not greater at low than at high pH. The fast oxidation rate of sphalerite in the Aznalcóllar sludge indicates a need for quick adoption of remediation measures in similar accidents elsewhere. The use of calcite amendments has little influence on the oxidation rate but does result in the accumulation of Zn in relatively insoluble forms.