Climate change effects on pesticide usage reduction efforts: a case study in China

China has announced plans to stabilize its pesticide use by 2020. Yet, future climate change will possibly increase the difficulty of meeting this goal. This study uses econometric estimation to explore how climate impacts Chinese pesticide usage and subsequently to project the future implications of climate change on pesticide use. The results indicate that both atmospheric temperature and precipitation increase pesticide usage. Under current climate change projections, pesticide usage will rise by +1.1 to 2.5% by 2040, +2.4 to 9.1% by 2070, and +2.6 to 18.3% by 2100. Linearly extrapolating the results to 2020 yields an approximately 0.5 to 1.2% increase. Thus, to achieve stabilization, more severe actions are needed to address this increase. Possible actions to achieve the reductions needed include using better monitoring and early warning networks so as to permit early responses to climate change-stimulated increases, enhancing information dissemination, altering crop mix, and promoting nonchemical control means. Additionally, given that increased pesticide usage generally increases health and environmental damage, there may be a need to more widely disseminate safe application procedure information while also strengthening compliance with food safety regulations. Furthermore, pest control strategies will need to be capable of evolving as climate change proceeds. Globally, efforts could be made to (1) scale up agrometeorological services, especially in developing countries; (2) use international frameworks to better align the environmental and health standards in developing countries with those in developed countries; and (3) adapt integrated pest management practices to climate change, especially for fruits and vegetables.     

Evaluation of the forest growth simulator SILVA on dominant trees in mature mixed Silver fir–Norway spruce stands in South-West Germany

Forest growth simulators go beyond a mere tabulation of empirical measurements by employing biometric models that functionally describe the dependence of forest growth of the initial forest structure, growth conditions and management regime. This makes them very flexible and allows predicting growth reactions for unknown and/or complex forest growth scenarios. When simulation outcomes are to be used in silvicultural strategic planning, the results are of direct and delicate importance, and the correct simulator performance must be ascertained. This is especially so when the considered forest situation differs from the forest data used to parameterise the model (e.g. different geographical region).In this article, the forest growth simulator SILVA (version 2.2) was validated for 55 long-term experimental plots of mature mixed Silver fir–Norway spruce stands in southwest Germany (Picea abies, Abies alba). The evaluation was restricted to the upper canopy trees during the survey period 1989–2004. Following the general evaluation criteria for ecological models from [Vanclay, J.K., Skovsgaard, J.P., 1997. Evaluating forest growth models. Ecol. Mod. 98, 1–12], a specific methodology was developed to evaluate the simulated height and diameter growth on the basis of forest growth principles.The qualitative analysis proved the SILVA growth algorithms to be in accordance with physiologically based standard growth equations. The quantitative evaluation was limited by incomplete knowledge of the site conditions. To overcome this problem, the experimental plots were regarded as a “heterogeneous growth series” which allows analysing the growth behaviour in a more general way. It could be shown that for the given data set, the SILVA simulations produced an overestimation of height growth (median: +61% spruce, +12% fir), and an underestimation of diameter growth and competition sensitivity (median: ?16% spruce, ?70% fir). The errors partially compensated in the volume growth resulting in an overall over-/underestimation of +9% for spruce and ?58% for fir (median).The unbalanced height and diameter growth cannot be compensated by a change in the site conditions because this affects both height and diameter growth either positive or negative. Hence, an adjustment of selected parameterisation values appears to offer the best solution to adapt SILVA to the considered forest situation. This approach of adaptive parameterisation is discussed against a more general background of deductive vs. inductive forest growth modelling.     

Pulsed gas injection: A minimum effort approach for enhanced natural attenuation of chlorobenzene in contaminated groundwater

Chlorobenzene-contaminated groundwater was used to assess pulsed gas sparging as a minimum effort aeration strategy to enhance intrinsic natural attenuation. In contrast to existing biosparging operations, oxygen was supplied at minimum rate by reducing the gas injection frequency to 0.33 day^?1. Field tests in a model aquifer were conducted in a 12 m long reactor, filled with indigenous aquifer material and continuously recharged with polluted groundwater over 3 years. The closed arrangement allowed yield balances, cost accounting as well as the investigation of spatial distributions of parameters which are sensitive to the biodegradation process. Depending on the injection frequency and on the gas chosen for injection (pure oxygen or air) oxygen-deficient conditions prevailed in the aquifer. Despite the limiting availability of dissolved oxygen in the groundwater, chlorobenzene degradation under oxygen-deficient conditions proved to be more effective than under conditions with dissolved oxygen being available in high concentrations.     

Erprobung und Erfolgskontrolle eines Phytoremediationsverfahrens zur Sanierung Sprengstoff-kontaminierter Böden

The final article of a series of three evaluates the in situ-remediation of TNT(trinitrotoluene)-contaminated soil from ‘Werk Tanne’. The multidisciplinary approach allows a differentiated assessment. Grading with large-scale machinery leads to a depletion of TNT for almost 90% within the first 6 months, while ADNT(amino-dinitrotoluene)-content decreases more or less steadily over 1,5 years. Grading reduces the heterogenous distribution of the contamination only slightly. Results from field-monitoring and biotest-battery indicate residual toxicities of ecotoxicological relevance and a reduced capacity for biological regeneration, in comparison with the uncontamined site. Mycorrhized plants safe-guard the site and improve the soilecological conditions. Their role in reducing lower level residual toxicity requires further investigation. There is need for future research (1) on the dynamics and mechanisms of the initial decrease of TNT followed by stagnation, (2) on the fate of the primary metabolites, (3) on long-term effects of the phytoremediation, and (4) on the establishment of the complex monitoring for routine work.     

Metal mobility during in situ chemical oxidation of TCE by KMnO4

The potential for trace-metal contamination of aquifers as a side effect of In Situ Chemical Oxidation (ISCO) of chlorinated solvent contamination by KMnO(4) is investigated with column experiments. The experiments investigate metal mobility during in situ chemical oxidation of TCE by KMnO(4) under conditions where pH, flow rate, KMnO(4), TCE, and trace-metal concentrations were controlled. During ISCO, the injection of MnO(4) creates oxidizing conditions, and acidity released by the reactions causes a tendency toward low pH in aquifers. In order to evaluate the role of pH buffering on metal mobility, duplicate columns were constructed, one packed with pure silica sand, and one with a mixture of silica sand and calcite. Aqueous solutions of TCE and KMnO(4) (with 1 mg/L Cu, Pb, Zn, Mo, Ni, and Cr(VI)) were allowed to mix at the inlet to the columns. After the completion of the experiments, samples of Mn oxide were removed from the columns and analyzed by analytical scanning and transmission electron microscopy. In order to relate the results of the laboratory experiments to field settings, the analyses of Mn-oxide samples from the lab experiments were compared to samples of Mn oxide collected from a field-scale chemical-oxidation experiment that were also analyzed by analytical electron microscopy as well as time-of-flight secondary-ion mass spectroscopy. The pH ranged from 2.40 in the silica sand column to 6.25 in the calcite-containing column. The data indicate that aqueous Mo, Pb, Cu and Ni concentrations are attenuated almost completely within the columns. In contrast, Zn concentrations are not significantly attenuated and Cr(VI) is transported conservatively. The results indicate that within the range 2.40 to 6.25, metal mobility is not affected by pH. Comparison of analyses of Mn-oxide from the lab and field demonstrate that a variety of metals are sequestered from solution by Mn oxide.     

Assessment of chemical process hazards in early design stages

A new method called SREST-layer-assessment method with automated software tool is presented that in a hierarchical approach reveals the degree of non-ideality of chemical processes with regard to SHE (safety, health and environment) aspects at different layers: the properties of the chemical substances involved (substance assessment layer (SAL)), possible interactions between the substances (reactivity assessment layer (RAL)), possible hazard scenarios resulting from the combination of substances and operating conditions in the various equipments involved (equipment assessment layer (EAL)), and the safety technologies that are required to run a process safely and in accordance with legal regulations (safety-technology assessment layer (STAL)). In RAL, EAL and STAL the main focus is put on process safety. A case study is used to show the principles of the method. It is demonstrated how the method can be used as a systematic tool to support chemical engineers and chemists in evaluating chemical process safety in early process development stages.