Do changes in risk-taking affect habitat shifts of sticklebacks?

The distribution of individuals is often the outcome of conflicting demands, such as between predator avoidance and reproduction. A factor that has seldom been considered in studies on habitat choice is time-dependent changes in risk-taking. We investigated the distribution of threespine sticklebacks, Gasterosteus aculeatus, over two breeding seasons and found it to change with time towards shallower areas with a more open habitat structure. Shallow and structurally less complex habitats were probably favorable due to a higher reproductive rate, but costly due to an increased risk of predation. Contrary to expectation, changing predation pressure was not a predictor of the shift in habitat use and, thus, not the proximate cue. Instead date was the main predictor. This suggests that increased risk-taking in relation to predation contributed to the habitat shift. The possibility was supported by a laboratory experiment that showed sticklebacks to take larger risks and prefer more predator-exposed areas at the end of the season than at the start of the season. These results demonstrate that temporal changes in risk-taking occur and can influence habitat choice, which points to the importance of considering risk-taking, in addition to predation pressure, when studying the effect of predators on distribution.Communicated by J. Krause     

Photolytic clean-up of biological samples for gas chromatographic analysis of chlorinated paraffins

A method based on gas chromatography electron capture detection (GC-ECD) for the analysis of chlorinated paraffins (CPs) in biological samples has been investigated. The method includes photolytic destruction of halogenated aromatic compounds, such as PCBs, to eliminate some of the interferences in the analysis of CPs in environmental samples. Gel permeation chromatography was used to isolate CPs from the interfering components of Toxaphene and chlordane after the photolysis. GC-ECD gave a detection limit of 20 ng CPs/g fresh muscle tissue. The recovery of CPs from a spiked moose liver sample was estimated to 94%.     

Predation risk affects courtship and attractiveness of competing threespine stickleback males

The effect of predation risk and male-male competition on male courtship behaviour and attractiveness to females was studied in the threespine stickleback (Gasterosteus aculeatus) by presenting dummy or live females to solitary and competing males under different predation risks. In the presence of a predator, males decreased courtship activity. Different courtship components were, however, adjusted to different extents and in opposing directions to predation risk, probably because the single components may have varied in riskiness. The presence of a competing male decreased overall courtship activity, but increased the frequency of zigzags, suggesting zigzagging to be a competitive strategy against other males. In the presence of a predator male courtship activity was not affected by a competitor. Female mate choice correlated with the males' previous frequency of zigzags towards a dummy female. However, when a live female paid attention to a male, the male decreased zigzagging and instead increased leading and fanning behaviours, probably trying to attract the female to the nest to mate. Predation risk affected the attractiveness of males as females reduced their attention to a male when he faced a predator and reduced his courtship activity. As females instead increased their attention to a competing male that had increased his courtship activity, due to decreased competition, males clearly are balancing mating opportunities against predator avoidance. When males vary in their susceptibility to predators, predation risk may thus affect mating success of competing males. Received: 31 January 1997 / Accepted after revision: 15 April 1997     

Photochemical transformations of tetrabromobisphenol A and related phenols in water

A method was developed for studies of the phototransformation at UV irradiation of aqueous solutions of tetrabromobisphenol A (TBBPA), tribromobisphenol A (TriBBPA), tetrachlorobisphenol A (TCBPA), 2,4-dichlorophenol at various pHs as well as 2-chlorophenol, 2-bromophenol, 3,4-dichlorophenol and bisphenol A at pH 11. The absorbance spectra of the compounds and the emission spectra of the light-source were determined and used to calculate disappearance quantum yields of the photochemical reactions that were taking place. No major differences between the disappearance quantum yields of TBBPA and TCBPA were observed at pH 10, while the disappearance quantum yield of TriBBPA was approximately two times higher. The rate of decomposition of TBBPA was six times higher at pH 8 than at pH 6. Identification of the degradation products of TBBPA and TriBBPA, by GC-MS analysis and by comparison to synthesised reference compounds, indicated that TBBPA and TriBBPA decompose via different mechanisms. Three isopropylphenol derivatives; 4-isopropyl-2,6-dibromophenol, 4-isopropylene-2,6-dibromophenol and 4-(2-hydroxyisopropyl)-2,6-dibromophenol, were identified as major degradation products of TBBPA while the major degradation product of TriBBPA was tentatively identified as 2-(2,4-cyclopentadienyl)-2-(3,5-dibromo-4-hydroxyphenyl)propane.     

Multiple system modelling of waste management

Due to increased environmental awareness, planning and performance of waste management has become more and more complex. Therefore waste management has early been subject to different types of modelling. Another field with long experience of modelling and systems perspective is energy systems. The two modelling traditions have developed side by side, but so far there are very few attempts to combine them. Waste management systems can be linked together with energy systems through incineration plants. The models for waste management can be modelled on a quite detailed level whereas surrounding systems are modelled in a more simplistic way. This is a problem, as previous studies have shown that assumptions on the surrounding system often tend to be important for the conclusions. In this paper it is shown how two models, one for the district heating system (MARTES) and another one for the waste management system (ORWARE), can be linked together. The strengths and weaknesses with model linking are discussed when compared to simplistic assumptions on effects in the energy and waste management systems. It is concluded that the linking of models will provide a more complete, correct and credible picture of the consequences of different simultaneous changes in the systems. The linking procedure is easy to perform and also leads to activation of project partners. However, the simulation procedure is a bit more complicated and calls for the ability to run both models.     

Exposure to benzene,toluene, xylenes and total hydrocarbons among snowmobile drivers in Sweden

The exposure to benzene, toluene, xylenes and total hydrocarbons among 25 individuals exposed to exhaust from a snowmobile equipped with a two-stroke engine has been evaluated. Sampling was performed by pumped and diffusive sampling in parallel. There was a relatively bad agreement between the two air-sampling methods. The bad agreement can in part be explained by back diffusion of the substances from the samplers, a high face velocity, and deposition of droplets of unburned gasoline onto or in the vicinity of the samplers.

The levels of benzene ranged from not detectable (0.01 mg m⁻³) to 2.5 mg m⁻³. For toluene, xylenes and total hydrocarbons the exposure was 0.10–12.0, 0.05–13.0 and 0.90–273 mg m⁻³ respectively. The result from two measurements on individuals travelling on an open sleigh at the rear of the vehicle indicated higher levels of benzene, 0.7–0.8 mg m⁻³. Children are often riding as a passenger on a sledge and may thus have a higher exposure than their parents. This study indicates that spare time driving a snowmobile may cause a considerable exposure to benzene. Using a four-stroke engine equipped with a catalyst could reduce the exposure. To reduce the exposure for the passenger on a sleigh an extension of the exhaust pipe may be effective.     

Influence of seat geometry and seating posture on NIC(max) long-term AIS 1 neck injury predictability

OBJECTIVE: Validated injury criteria are essential when developing restraints for AIS 1 neck injuries, which should protect occupants in a variety of crash situations. Such criteria have been proposed and attempts have been made to validate or disprove these. However, no criterion has yet been fully validated. The objective of this study is to evaluate the influence of seat geometry and seating posture on the NIC(max) long-term AIS 1 neck injury predictability by making parameter analyses on reconstructed real-life rear-end crashes with known injury outcomes. METHODS: Mathematical models of the BioRID II and three car seats were used to reconstruct 79 rear-end crashes involving 110 occupants with known injury outcomes. Correlations between the NIC(max) values and the duration of AIS 1 neck injuries were evaluated for variations in seat geometry and seating posture. Sensitivities, specificities, positive predictive values, and negative predictive values were also calculated to evaluate the NIC(max) predictability. RESULTS: Correlations between the NIC(max) values and the duration of AIS 1 neck injuries were found and these relations were used to establish injury risk curves for variations in seat geometry and seating posture. Sensitivities, specificities, positive predictive values, and negative predictive values showed that the NIC(max) predicts long-term AIS 1 neck injuries also for variations in seat geometry and seating postures. CONCLUSION: The NIC(max) can be used to predict long-term AIS 1 neck injuries.     

Evaluation of a tape-stripping technique for measuring dermal exposure to pyrene and benzo(a)pyrene

Epidemiological studies have shown an increased incidence of cancer among workers occupationally exposed to polycyclic aromatic hydrocarbons (PAHs). As the dermal route is considered important for exposure to PAHs in the workplace, the aim of this study was to develop and evaluate a tape-stripping technique for monitoring dermal exposure to pyrene and benzo(a)pyrene. The tape-stripping method was evaluated by applying different concentrations of pyrene and benzo(a)pyrene directly onto tape strips (spiked tapes), clean glass plates, and on the skin of five volunteers. The glass plates were stripped using a single strip of tape and the skin of the volunteers was stripped with five consecutive strips of tape after 0 and 30 minutes. The method was also tested on five chimney sweeps at three exposure sites. High-performance liquid chromatography with fluorescence detection was employed for the quantification of pyrene and benzo(a)pyrene. The mean recovery from the spiked tapes was 97% for pyrene and 93% for benzo(a)pyrene. The mean overall recovery from the glass plates was 88% and 76% for pyrene and 88 and 85% for benzo(a)pyrene. The recovery from human skin was 70% and 63% for pyrene and 60 and 54% for benzo(a)pyrene, after 0 and 30 minutes, respectively. A concentration gradient was clearly detected between the five consecutive strips. Detectable amounts of pyrene and benzo(a)pyrene were found on all chimney sweeps at all exposure sites. This method can thus be used to detect and quantify dermal exposure to pyrene and benzo(a)pyrene. The results also show that pyrene and benzo(a)pyrene may be taken up by the skin.     

A source classification framework supporting pollutant source mapping,pollutant release prediction,transport and load forecasting,and source control planning for urban environments

Purpose

Implementation of current European environmental legislation such as the Water Framework Directive requires access to comprehensive, well-structured pollutant source and release inventories. The aim of this work was to develop a Source Classification Framework (SCF) ideally suited for this purpose.

Methods

Existing source classification systems were examined by a multidisciplinary research team, and an optimised SCF was developed. The performance and usability of the SCF were tested using a selection of 25 chemicals listed as priority pollutants in Europe.

Results

The SCF is structured in the form of a relational database and incorporates both qualitative and quantitative source classification and release data. The system supports a wide range of pollution monitoring and management applications. The SCF functioned well in the performance test, which also revealed important gaps in priority pollutant release data.

Conclusions

The SCF provides a well-structured approach for European pollutant source and release classification and management. With further optimisation and demonstration testing, the SCF has the potential to be fully implemented throughout Europe.

     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.