Linking global drivers with local and regional change: a social-ecological system approach in Chilika Lagoon,Bay of Bengal

Global scale drivers such as international markets for shrimp can trigger large changes at local and regional scales. But there is also a poorly appreciated reverse process, operating from the bottom up, with potential for triggering changes at higher scales. Thus, effects of drivers can be seen as a two-way process in which global drivers and local and regional drivers can potentially impact each other. Here, we argue that not only can global drivers impact the sustainability of local and regional social-ecological systems, but sustainability at higher scales can also be impacted by changes at the scale of local and regional social-ecological systems. Using Chilika, a large lagoon on the Bay of Bengal, Odisha State in India as a case, we show that traditional small-scale capture fisheries supporting 150 fisher villages with some 400,000 people were marginalized by aquaculture development for tiger prawn and by state-driven hydrological interventions, with impacts on the ecology of the lagoon. These changes, in turn, contribute to global poverty and food insecurity, making it difficult for India to meet international targets such as millennium development goals. The marginalized fisherfolk become part of environmental justice and other social movements. With large parts of the lagoon converted into a virtual monoculture for the production of tiger prawn, changes in Chilika (a Ramsar site) contribute to wetland habitat loss at the global scale, and biodiversity losses, possibly including IUCN red-listed species.     

Experimental investigation of solar still with opaque north triangular face

Developing a compact, simple, and productive solar still is a main challenge. This paper describes a simple modification of the solar still that significantly enhances its productivity. A laboratory scale of modified single effect double slope glass solar still with the opaque triangular north wall has been developed and tested for enhancement of productivity in sunny days of the summer season in the month of April. The experiments on still have been carried out under three levels of water depths from 1 to 3 cm and compared it with the performance of conventional still of double slope single effect solar still of the same size. It is clear from the observations that opaque type still gave maximum distillate of 1793 ml at 1 cm depth of water while conventional still could produce only 1519 ml for the same depth of water. Also, for 2 and 3 cm depth of water, the opaque type still found to be more productive than conventional double slope solar still. As the former produced 1532 and 1464 ml while the latter produced 1328 and 1235 ml, for 2 and 3 cm depth of water, respectively.     

Biosynthesis and effects of copper nanoparticles on plants

Copper nanoparticles have improved properties compared to the bulk copper material. Copper nanoparticles indeed find applications in gas sensors, heat transfer fluids, catalysis, solar energy and batteries. Antibacterial and antifungal activities of copper nanoparticles find applications in the agriculture and healthcare sectors. Nonetheless, careless use of copper nanoparticles may cause environmental pollution and health effects. Here we review the biosynthesis of copper nanoparticles using plant materials, named phytosynthesis, and micro-organisms. We also discuss the effect of copper nanoparticles on crops and pathogenic micro-organisms. Copper nanoparticles varying in sizes from 5 to 295 nm have been synthesized using leaf extracts and latex from plants, and using bacteria and fungi. Biosynthesized copper nanoparticles show good antimicrobial activity inhibiting the growth of pathogenic bacteria and pathogenic fungi. Copper nanoparticles enhance the germination and growth of some plants at lower concentrations, whereas high concentrations result in retarded growth.     

Environment and productivities in developed and developing countries: The case of carbon dioxide and sulfur dioxide

We propose a productivity index for undesirable outputs such as carbon dioxide (CO₂) and sulfur dioxide (SO₂) emissions and measure it using data from 51 developed and developing countries over the period 1971–2000. About half of the countries exhibit the productivity growth. The changes in the productivity index are linked with their respective per capita income using a semi-parametric model. Our results show technological catch up of low-income countries. However, overall productivities both of SO₂ and CO₂ show somewhat different results.     

Cytogenetic studies of chromium (III) oxide nanoparticles on Allium cepa root tip cells

The current study evaluates the cytogenetic effects of chromium (III) oxide nanoparticles on the root cells of Allium cepa. The root tip cells of A. cepa were treated with the aqueous dispersions of Cr₂O₃ nanoparticles (NPs) at five different concentrations (0.01, 0.1, 1, 10, and 100 μg/mL) for 4 hr. The colloidal stability of the nanoparticle suspensions during the exposure period were ascertained by particle size analyses. After 4 hr exposure to Cr₂O₃ NPs, a significant decrease in mitotic index (MI) from 35.56% (Control) to 35.26% (0.01 μg/mL), 34.64% (0.1 μg/mL), 32.73% (1 μg/mL), 29.6% (10 μg/mL) and 20.92% (100 μg/mL) was noted. The optical, fluorescence and confocal laser scanning microscopic analyses demonstrated specific chromosomal aberrations such as—chromosome stickiness, chromosome breaks, laggard chromosome, clumped chromosome, multipolar phases, nuclear notch, and nuclear bud at different exposure concentrations. The concentration-dependent internalization/bio-uptake of Cr₂O₃ NPs may have contributed to the enhanced production of anti oxidant enzyme, superoxide dismutase to counteract the oxidative stress, which in turn resulted in observed chromosomal aberrations and cytogenetic effects. These results suggest that A. cepa root tip assay can be successfully applied for evaluating environmental risk of Cr₂O₃ NPs over a wide range of concentrations.     

Impact of Ni(II), Zn(II) and Cd(II) on biogassification of potato waste

A study was conducted on anaerobic digestion of potato waste and cattle manure mixture, inoculated with 12% inoculum and diluted to 1:1 substrate water ratio at 37 +/- 1 degrees C. Initially pH of substrate was found to be 4.5 to 5.0. Lime and sodium bicarbonate solutions were employed to adjust the pH to 7.5. Biogas production continued up to 10 and 7 days, when lime and sodium bicarbonate solutions were used to adjust the pH, respectively. Biogassification potential was studied in response to different ratio of waste and cattle manure. Biogas production rate was higher when potato waste and cattle manure were used in 50:50 ratio. Effect of two different concentrations (2.5 and 5.0 ppm) of three heavy metals viz. (Ni (II), Zn (II) and Cd (II)) on anaerobic digestion of substrate (potato waste--cattle manure, 50:50) was studied. At 2.5 ppm, all the three heavy metals increased biogas production rate over the control value. The percentage increase in biogas production over the control was highest by Cd, followed by Ni and Zn. In all the treatments, methane content of biogas increased with increase in time after feeding. Various physico-chemical parameters viz. total solids, total volatile solids, total organic carbon and chemical oxygen demand considerably declined after 7 days of digestion and decline was greater in presence of heavy metals as compared to control. The physico-chemical parameters revealed maximum decrease in the presence of 2.5-ppm concentrations of heavy metals with the substrate. Among all the three heavy metals employed in the study, Cd++ at 2.5 ppm was found to produce maximum biogas production rate. The use of three heavy metals to enhance biogas production from potato and other horticultural waste is discussed.     

Microbial biomass, P-nutrition, and enzymatic activities of wheat soil in response to phosphorus enriched organic and inorganic manures

Compost was prepared from wheat straw enriched with Rajasthan rock phosphate and Aspergillus awamori. The resulting phospho-compost along with phosphorus enriched FYM, mineral fertilizer (rock phosphate) and super phosphate were evaluated for their individual contribution in improving organic matter status, P availability, and enzymatic activities of soil under wheat crop grown in a micro plot. The results showed that total organic carbon, nitrogen, microbial biomass, and humus content (an index of organic matter status of soil) of soil was highest when farm yard manure (FYM) after its enrichment with 12.5% rock phosphate was applied. Microbial enriched phospho-compost was the product yielding highest soil available phosphorus, phosphorus uptake, urease, and cellulase activities. However, FYM amended with 25% rock phosphate resulted in the greatest enhancement of beta- glucosidase. Measured parameters indicated a sure improvement of chemical and biological activities of soil after the application of phosphorus enriched organic amendments compared to the commercial fertilizer commonly used by the Indian farmers.     

Phototransformation of alphacypermethrin as thin film on glass and soil surface

Photodegradation of alphacypermethrin ((RS)-alpha cyano-3-phenoxy benzyl (1RS) cis-3-(2,2,dichlorovinyl)-2,2-dimethyl cyclopropane carboxylate) was studied as a thin film on glass surface and on black and red soil surfaces. A number of photoproducts from glass surfaces have been isolated, characterized and identified by gas chromatography-mass spectroscopy (GC-MS). However, only two of them viz. 3-phenoxy benzyl alcohol and [2,2-dichlorovinyl-3(2,2,dimethyl) cyclopropane carboxylate] could be identified from both the soil. Rate of photodegradation on glass and soil surface under UV and sunlight followed first order kinetics with significant correlation coefficients. The rate of photodegradation was greater on black than on red soil.     

Options for broadening and deepening the LCA approaches

Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.