Effects of vehicle impact velocity, vehicle front-end shapes on pedestrian injury risk

Objective: This study aimed at investigating the effects of vehicle impact velocity, vehicle front-end shape, and pedestrian size on injury risk to pedestrians in collisions with passenger vehicles with various frontal shapes. Method: A series of parametric studies was carried out using 2 total human model for safety (THUMS) pedestrian models (177 and 165?cm) and 4 vehicle finite element (FE) models with different front-end shapes (medium-size sedan, minicar, one-box vehicle, and sport utility vehicle [SUV]). The effects of the impact velocity on pedestrian injury risk were analyzed at velocities of 20, 30, 40, and 50?km/h. The dynamic response of the pedestrian was investigated, and the injury risk to the head, chest, pelvis, and lower extremities was compared in terms of the injury parameters head injury criteria (HIC), chest deflection, and von Mises stress distribution of the rib cage, pelvis force, and bending moment diagram of the lower extremities. Result: Vehicle impact velocity has the most significant influence on injury severity for adult pedestrians. All injury parameters can be reduced in severity by decreasing vehicle impact velocities. The head and lower extremities are at greater risk of injury in medium-size sedan and SUV collisions. The chest injury risk was particularly high in one-box vehicle impacts. The fracture risk of the pelvis was also high in one-box vehicle and SUV collisions. In minicar collisions, the injury risk was the smallest if the head did not make contact with the A-pillar. Conclusion: The vehicle impact velocity and vehicle front-end shape are 2 dominant factors that influence the pedestrian kinematics and injury severity. A significant reduction of all injuries can be achieved for all vehicle types when the vehicle impact velocity is less than 30?km/h. Vehicle designs consisting of a short front-end and a wide windshield area can protect pedestrians from fatalities. The results also could be valuable in the design of a pedestrian-friendly vehicle front-end shape. [Supplementary materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention for the following free supplemental resource: Head impact conditions and injury parameters in four-type vehicle collisions and validation result of the finite element model of one-box vehicle and minicar. ].     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.     

Effects of light quality on initiation and development of meroplanktonic diatom blooms in a eutrophic shallow sea

We investigated the effects of light quality on resting stage cell germination and vegetative cell growth of meroplanktonic diatoms in a small port in Hakata Bay, Japan and in the laboratory. During the investigation over the year of 2006, the meroplanktonic diatom bloom first occurred in the end of May and then repeated wane and wax until October in the small port. From late April to middle May, light penetrating the water column was often strong and attenuations of all spectral lights were low. During this period, Skeletonema costatum, Thalassiosira minima, and Chaetoceros sp. appeared frequently, followed by the blooms of S. costatum and Chaetoceros sp. in late May. Thereafter, S. costatum and Chaetoceros sp. bloomed in late June but not in middle June, when pigmented flagellates bloom appeared. The attenuation of short-wavelength light such as violet and blue lights was markedly high during these diatom and flagellate blooms; all blooms disappeared within several days. Vegetative cell strains of the three diatoms under light emitting diodes (LEDs) with six different spectra (violet, blue, green, orange, red, and near-infrared) grew at a higher rate under short-wavelength light, violet and blue. On the other hand, when suspensions of bottom sediments from Hakata Bay were cultured under the same LEDs and in the dark, vegetative cells of S. costatum appeared under all LEDs except for orange and near-infrared, vegetative cells of T. minima appeared under all LEDs but not in the dark, and vegetative cells of Chaetoceros sp. appeared under violet and blue LEDs. However, vegetative cell densities of the three diatoms increased much more under violet light than under other LEDs within a short period (6 days). Our study indicates that underwater penetration by short-wavelength light, such as violet and blue, may be an important factor in the initiation and development of meroplanktonic diatom blooms.     

Quantification of free and esterified long-chain fatty acids without extraction by high-performance liquid chromatography in anaerobic digestion sludge

Journal of Material Cycles and Waste Management - During anaerobic digestion, the concentrations of long-chain fatty acids (LCFAs) need to be monitored to achieve good performance due to their...     

Greenhouse gas reduction potential by household waste prevention

Journal of Material Cycles and Waste Management - We used a life-cycle assessment (LCA) approach to estimate the greenhouse gas (GHG) reduction effects of preventing 50% of all avoidable household...     

Development of a dynamic transfer model of (14)C from the atmosphere to rice plants

A dynamic compartment model was investigated to describe ¹⁴C accumulation in rice plants exposed to atmospheric ¹⁴C with temporally changing concentrations. In the model, rice plants were regarded to consist of three compartments: the ear and the mobile and immobile carbon pools of the shoot. Photosynthetically fixed carbon moves into the ear and the mobile carbon pool, and these two compartments release a part of this carbon into the atmosphere by respiration. Carbon accumulated in the mobile carbon pool is redistributed to the ear, while carbon transferred into the immobile carbon pool from the mobile one is accumulated there until harvest. The model was examined by cultivation experiments using the stable isotope, ¹³C, in which the ratios of carbon photosynthetically fixed at nine times during plant growth to the total carbon at the time of harvest were determined. The model estimates of the ratios were in relatively good agreement with the experimental observations, which implies that the newly developed compartment model is applicable to estimate properly the radiation dose to the neighboring population due to an accidental release of ¹⁴C from nuclear facilities.     

Flame retardants in indoor dust and air of a hotel in Japan

Occurrence of flame retardants (FRs) in the indoor environment of highly flame-retarded public facilities is an important concern from the viewpoint of exposure because it is likely that FRs are used to a greater degree in these facilities than in homes. For this study, brominated flame-retardants (BFRs) and organophosphate flame-retardants and plasticizers (OPs), and brominated dibenzo-p-dioxins/furans (PBDD/DFs) were measured in eight floor dust samples taken from a Japanese commercial hotel that was assumed to have many flame-retardant materials. Concentrations of polybrominated diphenylethers (PBDEs) and hexabromocyclododecanes (HBCDs) varied by about two orders of magnitude, from 9.8–1700 ng/g (median of 1200 ng/g) and from 72–1300 ng/g (median of 740 ng/g), respectively. Concentrations of the two types of BFRs described above were most dominant among the investigated BFRs in the dust samples. It is inferred that BFR and PBDD/DF concentrations are on the same level as those in house and office dust samples reported based on past studies. Regarding concentrations of 11 OPs, 7 OPs were detected on the order of micrograms per gram, which are equivalent to or exceed the BFR concentrations such as PBDEs and HBCDs. Concentrations of the investigated compounds were not uniform among dust samples collected throughout the hotel: concentrations differed among floors, suggesting that localization of source products is associated with FR concentrations in dust. Passive air sampling was also conducted to monitor BFRs in the indoor air of hotel rooms: the performance of an air cleaner placed in the room was evaluated in terms of reducing airborne BFR concentrations. Monitoring results suggest that operation of an appropriate air cleaner can reduce both gaseous and particulate BFRs in indoor air.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Transfer of brominated flame retardants from components into dust inside television cabinets

Television (TV) set components are highly flame resistant, with their added brominated compounds such as polybrominated diphenyl ethers (PBDEs). These compounds might be released indoors via dust, which presents a potential exposure pathway for humans in the home environment. In this study, we collected dust from inside TV sets and TV set component samples (parts of housing front cabinets, rear cabinets and circuit boards) of five sets used in Japan. We measured BFRs (i.e., PBDEs, tetrabromobisphenol A (TBBPA) and hexabromocyclododecanes (HBCDs)) and polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/DFs). Analytical results of the TV components showed that the concentrations of PBDEs, TBBPA and PBDFs (48,000mug/g, 19,000mug/g and 9600ng/g as mean values, respectively) were all highest in the rear cabinets. The SigmaPBDD concentrations (460ng/g as a mean value) detected were highest in the circuit board samples. The respective SigmaPBDE and SigmaPBDF concentrations in the dust samples were 67-500mug/g (mean 300mug/g) and 180-650ng/g (mean 410ng/g). Such concentrations were 2-3 orders of magnitude higher than those previously reported for house dust samples, which suggests that the brominated compounds are transferred from TV components into dust. Comparison of congener patterns of the brominated compounds in the dust identified the components as the source of these BFRs.     

Transport and transformation of sulfur compounds over East Asia during the TRACE-P and ACE-Asia campaigns

On the basis of the recently estimated emission inventory for East Asia with a resolution of 1×1°, the transport and chemical transformation of sulfur compounds over East Asia during the period of 22 February through 4 May 2001 was investigated by using the Models-3 Community Multi-scale Air Quality (CMAQ) modeling system with meteorological fields calculated by the regional atmospheric modeling system (RAMS). For evaluating the model performance simulated concentrations of sulfur dioxide (SO₂) and aerosol sulfate (SO₄²⁻) were compared with the observations on the ground level at four remote sites in Japan and on board aircraft and vessel during the transport and chemical evolution over the Pacific and Asian Pacific regional aerosol characterization experiment field campaigns, and it was found that the model reproduces many of the important features in the observations, including horizontal and vertical gradients. The SO₂ and SO₄²⁻ concentrations show pronounced variations in time and space, with SO₂ and SO₄²⁻ behaving differently due to the interplay of chemical conversion, removal and transport processes. Analysis of model results shows that emission was the dominant term in regulating the SO₂ spatial distribution, while conversion of SO₂ to SO₄²⁻ in the gas phase and the aqueous phase and wet removal were the primary factors that controlled SO₄²⁻ amounts. The gas phase and the aqueous phase have the same importance in oxidizing SO₂, and about 42% sulfur compounds (25% in SO₂) emitted in the model domain was transported out, while about 57% (35% by wet removal processes) was deposited in the domain during the study period.