Monitoring of Bt-Maize pollen exposure in the vicinity of the nature reserve Ruhlsdorfer Bruch in northeast Germany 2007 to 2008

Background, aim, and scope Basically, technological innovations are associated with benefits and risks. This is also true for the introduction of genetically modified organisms (GMO) into agriculture. In Germany, precautionary regulations currently demand isolation distances (i.?e. buffer zones) for the cultivation of genetically modified maize (Bt-maize) in the vicinity of conventional (150?m) and organic maize fields (300?m). The Bt-toxin may harm non-target organisms (NTO) such as Lepidoptera. Despite this, corresponding regulations for the protection of nature reserves are lacking to date. Conventional and Bt-maize have been grown in the vicinity of the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch in Brandenburg, Germany. The aim of this study was to investigate whether exposure of maize pollen from surrounding Bt-maize fields to NTOs in the nature protection area could be excluded or not. Two types of exposure were investigated: Firstly, whether maize pollen was dispersed by wind into the nature reserve area exposing resident NTOs. Secondly, foraging NTOs from the nature reserve are exposed by roaming the surrounding fields and collecting maize pollen. In order to fulfil the precautionary principle defined by law, the study should help to determine appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of NTOs in the FFH Ruhlsdorfer Bruch. In 2007, the local authorities issued an isolation distance between Bt-maize fields and nature reserves of 100?m and in 2008, this became 250?m in the northern and 500?m in the westerly direction, respectively. Materials and methods Standardised methods for biological and technical pollen sampling issued by the Association of German Engineers (VDI 4330 Part 3, 2007 and VDI 4330 Part 4, 2006) were applied providing a quality controlled and methodologically harmonised database which does not only serve the needs to be fulfilled by the present case-specific monitoring study but can also be used as a reference database for further investigations. Maize pollen exposure was measured within the FFH Ruhlsdorfer Bruch and its immediate vicinity in July and August 2007 and 2008. In 2007, the sampling was performed at three sites using 12 technical samplers (Sigma-2/PMF) placed at five measuring points at distances from 5?m to 120?m from the maize field edges. Additionally, for biological pollen sampling six bee colonies were situated at these three sites (two colonies at each site). The technical sampler Sigma-2/PMF enables point sampling which is primarily influenced by wind and topography providing information on effective maize pollen input (flow and deposition) at the measuring sites. Honey-bees roaming in the surrounding area with typical foraging distances of several kilometres may act as planar collectors. They may serve as indicators for the exposure to pollen-collecting NTOs. Furthermore, biological sampling is more selective due to the organism’s preferences, whereas the technical sampling is neutral. Hence, both the technical and the biological sampling complement each other in their scope of application. The pollen samples of both matrices were analysed microscopically and the maize pollen loads were quantified. Pollen-DNA was analysed by means of the quantitative PCR-method (qPCR) identifying conventional and Bt-maize pollen by two independent laboratories. In 2008, the monitoring was repeated with additional sites. Eighteen technical samplers were exposed at five sites with eight measuring points at distances from 5?m to 250?m from the maize field edges. Two honey-bee colonies for biological sampling were placed at one site for control purposes. PCR-analyses were performed to measure the amounts of Bt-maize pollen in the samples. Results The results of pollen monitoring at the Ruhlsdorfer Bruch revealed maize pollen exposure for all monitoring sites in both surveys. In 2007, up to 1.75 million maize pollen/m² were deposited at sites closest to the maize field. At 120?m from field edge in the middle of the FFH-reserve, 99,000 maize pollen/m² were detected. In 2008, similar results were found, at distances up to 250?m from the field edges deposition of 164,000 maize pollen/m² was detected. Data on maize pollen deposition show a clear distance relationship and are in accordance with results of further comprehensive surveys based on the same methodology (Hofmann 2007). The results of the microscopic analysis of the pollen pellets demonstrated that bees collected maize pollen at all sites, in 2007 and 2008. Although maize pollen is not the main food source (2007:0.1–0.3?%; 2008:2–3?%) the collection efficiency of the bee colonies resulted in high amounts of sampled maize pollen with 4 to 11 million per site in 2007 and up to 467 million in 2008. Molecular-biological analysis of maize pollen DNA by qPCR demonstrated that transgenic Bt-MON810 DNA was present in all technical and biological samples, corroborated by two independent laboratories. In 2007, the GMO-content in the samples ranged up to 44?% in the bioaerosols and 49?% in the pollen pellets. In 2008, GMO-proportions of up to 18?% were detected. Discussion The results of this study provide evidence that NTOs in the Ruhlsdorfer Bruch were exposed to Bt-maize pollen under the cultivation conditions in 2007 with a buffer zone of 100?m. The GMO-content reached up to 48?%. The results of the monitoring in 2008 confirmed these findings. Even though the exposure could be reduced by increasing the isolation distances to 250?m and 500?m respectively, the results still show percentages of up to 18?% Bt-MON810 in the pollen samples. The results on maize pollen deposition at the Ruhlsdorfer Bruch in 2007 and 2008 correspond to the results of an investigation which was conducted over several years applying the same standardised method, but covering a wider range of distances. The correlation between maize pollen deposition (n/m²) and distance to the source field (m) fitted best to a power function of the type y = 1.2086 · 10⁶ · x ^–0.548. Despite the same trend, the pollen deposition in the Ruhlsdorfer Bruch revealed above-average findings. Also the analysis of the pollen pellets collected by the bees showed an exposure in 2007 with values for the GMO-content of up to 49?%. For both methods, the exposure decreased in 2008 due to the greater buffer zones up to 500?m. Whereas the GMO-content for the biological sampling were reduced to values below 10?%, the values for the technical sampling were still higher indicating that greater buffer zones would be necessary for safety reasons under the precautionary principle. Conclusions The results of this investigation proved that maize pollen were dispersed by wind to distances farther than 250?m from field edge leading to maize pollen exposure in the centre of the nature reserve. The results also demonstrated that foraging NTOs living in the nature reserve were exposed to maize pollen from surrounding fields. Considering the cultivation of Bt-maize MON810, the assumption of the Environmental Risk Assessment (ERA) that there will be no relevant exposure beyond the Bt-maize fields, cannot be confirmed. Considering the results of this and related studies and with respect to the precautionary principle, one can state that buffer zones between Bt-maize fields and protected areas are an effective measure to minimise the exposure of Bt-maize pollen to NTOs and, thus, to prevent from adverse effects. Recommendations and perspectives Because of still insufficient ecotoxicological data for the risk assessment of Bt-maize MON810 considering butterflies and other protected NTOs, protection standards assuring the precautionary principle have to be implemented to avoid Bt-maize pollen exposure to NTOs. This applies for the case Ruhlsdorfer Bruch and for nature reserve areas in general. In order to exclude risks to protected NTOs occurring in nature reserves, sufficient buffer zones for Bt-maize cultivation should be considered. The statistical analysis revealed that distances of more than 500?m are necessary to decisively reduce exposure to foraging insects. In fact, distances of more than 1,000?m are necessary to prevent maize pollen deposition from values above 100,000 pollen/m² with a certainty of 90?%. An adequate risk assessment can only be attained if based on field measurements accounting for the high variation of pollen deposition due to local environmental site conditions and field management. The monitoring should be based on standardised methods. It should include locations with the highest expected deposition rates, the boundaries of the protected areas and sites of interest within those boundaries, e.?g., specific habitats of sensitive species.     

Management von schadstoffbelasteten Feinsedimenten in Bundeswasserstraßen

The Federal Institute of Hydrology has developed operating strategies in order to deal with dredged material within the scope of the Waterways and Shipping Administration. Sediments will be assessed based on certain quality parameters. The potential environmental impact at the source and relocation areas has to be evaluated in respect to ecological and economical issues. A coordinated sediment management plan for the Rhine River was commissioned. The most important contaminated sedimentation areas were identified, and special sedimentation areas were classified based on ecological impact or even risk. Proposals for economical and ecological strategies are discussed. Further developments for operational instructions dealing with sediments and dredged material in federal waterways are still being processed. The objectives of the river basin commissions as well as those of the stakeholders have to be met in an appropriate manner. In the framework of the analysis and impact of climate change on both sediment quantity and quality for optimizing sediment management, one or more dimensional hydraulic models will be applied. This will help gain a better insight into the understanding of contaminant transport in freshwater bodies.     

Toxizität und Risk Assessment fluvialer Sedimente und Schwebstoffe: Eine kurze Übersicht bisheriger und neuerer Entwicklungen

Background In recent years, sediments have become a central topic of scientific and public discussion as an important factor for determining water quality. While the quality of surface waters in Germany has significantly improved during the past years, highly contaminated sediments still create a considerable threat to the quality of several European catchment areas. Main features Here, we summarize different concepts and methods for the assessment of sediment quality and report on some novel integrative test methods for assessing sediment toxicity including contaminant re-mobilization during simulated re-suspension events. Results and discussion Currently, different approaches for assessment of sediment pollution exist. While instrumental chemical analyses are not suitable to accurately describe sediment toxicity, combinations of biological and chemical test procedures and integrated approaches, for example weight-of-evidence studies and effect-directed analysis (EDA), have the potential to identify key contaminants. Inter-disciplinary studies combining hydrodynamic and toxicological aspects coupled to real exposure of aquatic organisms to contaminants are currently being developed. Conclusions Monitoring and assessment of sediment quality are of increasing importance, not only for national legislation but also for the implementation of the European Water Framework Directive (WFD). Integrated approaches for the determination of sediment stability play a key role in the appropriate sediment-monitoring strategies.     

Evolutionary Distinctiveness,Threat Status,and Ecological Oddity in Primates

Abstract: The EDGE (evolutionarily distinct and globally endangered) conservation program ( http://www.edgeofexistence.org ) uses a composite measure of threat and phylogenetic isolation to rank species for conservation attention. Using primates as a test case, we examined how species that rank highly with this metric represent the collective from which they are drawn. We considered the ecological and morphological traits, including body mass, diet, terrestriality, and home range size, of all 233 species of primates. Overall, EDGE score and the level of deviance from the mean of 20 different ecological, reproductive, and morphological variables were correlated (mean correlation r =0.14, combined p =1.7 × 10^?14). Although primates with a high EDGE score had characteristics that made them seem odd, they did not seem to express more ancestral characteristics than expected. Sets of primate species with high EDGE scores will, therefore, collectively capture a broader than expected range of the biology of the clade. If similar patterns hold in other groups, the EDGE metric may be useful for prioritizing biodiversity for conservation.     

The importance of auditory-visual interaction in the construction of ‘tranquil space’

In a world of sensory overload, it is becoming increasingly important to provide environments that enable us to recover our sense of well being. Such restorative (‘tranquil’) environments need to comprise sufficient sensory stimulation to keep us engaged, whilst at the same time providing opportunity for reflection and relaxation. One essential aspect in safeguarding existing, or developing new ‘tranquil space’, is understanding the optimum relationship between the soundscape and the visual composition of a location. This research represents a first step in understanding the effects of audio-visual interaction on the perception of tranquillity and identifies how the interpretation of acoustic information is an integral part of this process. By using uni and bi-modal auditory-visual stimuli in a two stage experimental strategy, it has been possible to measure the key components of the tranquillity construct. The findings of this work should be of particular interest to those charged with landscape management, such as National Park Authorities, Regional Councils, and other agencies concerned with providing and maintaining public amenity.     

Effects of particle size on chemical speciation and bioavailability of copper to earthworms (Eisenia fetida) exposed to copper nanoparticles

To investigate the role of particle size on the oxidation, bioavailability, and adverse effects of manufactured Cu nanoparticles (NPs) in soils, we exposed the earthworm Eisenia ferida to a series of concentrations of commercially produced NPs labeled as 20- to 40-nm or < 100-nm Cu in artificial soil media. Effects on growth, mortality, reproduction, and expression of a variety of genes associated with metal homeostasis, general stress, and oxidative stress were measured. We also used X-ray absorption spectroscopy and scanning X-ray fluorescence microscopy to characterize changes in chemical speciation and spatial distribution of the NPs in soil media and earthworm tissues. Exposure concentrations of Cu NPs up to 65 mg kg(-1) caused no adverse effects on ecologically relevant endpoints. Increases in metallothionein expression occurred at concentrations exceeding 20 mg kg(-1) of Cu NPs and concentrations exceeding 10 mg kg(-1) of CuSO4. Based on the relationship of Cu tissue concentration to metallothionein expression level and the spatial distribution and chemical speciation of Cu in the tissues, we conclude that Cu ions and oxidized Cu NPs were taken up by the earthworms. This study suggests that oxidized Cu NPs may enter food chains from soil but that adverse effects in earthworms are likely to occur only at relatively high concentrations (> 65 mg Cu kg(-1) soil).