Determination of biomass burning emission factors: Methods and results

Biomass burning, in a broad sense, encompasses different burning practices, including open and confined burnings, and different types of vegetation. Emission factors of gaseous or particulate trace compounds are directly dependent both on the fuel type and the combustion process. Emission factors are generally calculated by stoichiometric considerations using the carbon mass balance method, applied either to combustion chamber experiments or to field experiments based on ground-level measurements or aircraft sampling in smoke plumes. There have been a number of experimental studies in the last 10 years to investigate wildfires in tropical, temperate, or boreal regions. This article presents an overview of measurement methods and experimental data on emission factors of reactive or radiatively active trace compounds, including trace gases and particles. It focuses on fires in tropical regions, that is, forest and savanna fires, agricultural burns, charcoal production, use of fuelwood, and charcoal combustion.     

Factor analysis of trace-element data from tree-bark samples in The Netherlands

Monte Carlo-assisted factor analysis has been applied to a data set of 20 trace-element concentrations in tree-bark samples obtained from 123 locations in The Netherlands, with the aim to investigate the suitability of bark as a biomonitor for air pollution. A Monte Carlo approach was used to give more insight to the uncertainties and significance levels of the factor analysis results. Notwith-standing a rather strong influence of soil material on the concentration levels, factor analysis enabled the identification of five significant pollution source types, all of which corresponded with source types found in an earlier biomonitoring study in The Netherlands using epiphytic lichens. A more detailed comparison with the lichen results showed a remarkable difference in lead concentrations between bark and lichen. It was concluded that bark can be successfully employed as a biomonitor for air pollution. The power of factor analysis to adequately determine the soil contribution may render extensive sample washing procedures superfluous.     

Characterization of microbial communities from coastal waters using microarrays

Molecular methods, including DNA probes, were used to identify and enumerate pathogenic Vibrio species in the Chesapeake Bay; our data indicated that Vibrio vulnificus exhibits seasonal fluctuations in number. Our work included a characterization of total microbial communities from the Bay; development of microarrays that identify and quantify the diversity of those communities; and observation of temporal changes in those communities. To identify members of the microbial community, we amplified the 16S rDNA gene from community DNA isolated from a biofilm sample collected from the Chesapeake Bay in February, 2000. The resultant 75 sequences were 95% or more similar to 7 species including two recently described Shewanella species, baltica and frigidimarina, that have not been previously isolated from the Chesapeake. When the genera of bacteria from biofilm after culturing are compared to those detected by subcloning amplified 16S fragments from community DNA, the cultured sample exhibited a strong bias. In oysters collected in February, the most common bacteria were previously unknown. Based on our 16S findings, we are developing microarrays to detect these and other microbial species in these estuarine communities. The microarrays will detect each species using four distinct loci, with the multiple loci serving as an internal control. The accuracy of the microarray will be measured using sentinel species such as Aeromonas species, Escherichia coli, and Vibrio vulnificus. Using microarrays, it should be possible to determine the annual fluctuations of bacterial species (culturable and non-culturable, pathogenic and non-pathogenic). The data may be applied to understanding patterns of environmental change; assessing the health of the Bay; and evaluating the risk of human illness associated with exposure to and ingestion of water and shellfish.     

Measurements of Ozone Concentrations in Zagreb

Ozone concentrations were measured in Zagreb at four sites from May 1999 to April 2001 in order to categorize the air quality with respect to ozone. In the summer of 2000, the ozone measurements were also extended to four sites in the suburbs of Zagreb. Methods of active and passive sampling with nitrite ion as a reagent were used. In the northern part of the town ozone was analyzed by an automatic device. Automatic device measurements in the years 1999 and 2000 showed that hourly averages of ozone concentrations did not exceed the Croatian recommended value of the 98th percentile (180 g m^–3). Over the two-year period, 24-h averages occasionally exceed 110 g m^–3 in city center and in the northern part of the town. Regardless of these isolated examples, ozone was well within acceptable concentrations. Ozone concentrations measured in summer 2000 were higher in the suburbs of Zagreb than in the city. The 98th percentile values higher than 110 g m^–3 were recorded at three sites.     

Interactions between copper and cadmium modify metal organ distribution in mature tilapia, Oreochromis mossambicus

Sexually mature female tilapia were exposed to sublethal concentrations of waterborne Cu and/or Cd over 6 days, and subsequent body concentrations of these metals were determined in several organs. The results show that the distribution of Cu and Cd was metal and organ specific. This is demonstrated, for example, by the observation that in tilapia, Cu exposure did not result in Cu accumulation in the liver, whereas in the intestinal wall, notably high concentrations of Cu and Cd were measured in metal exposed fish. In addition to single metal exposed fish, we also determined Cu and Cd body distribution in Cu?Cd co-exposed fish. The observed interactions in metal accumulation were most pronounced in the organs of fish exposed to low, environmentally realistic, metal concentrations.     

Linear least squares method for time series analysis with an application to a methane time series

A simple method of time series analysis, based upon linear least squares curve fitting, is developed. The method's advantages and disadvantages are discussed, and an example is presented using the Vostok Core methane record.     

Ecoprofit-Styria-prepare Thirteen pollution prevention case studies in the Styrian industry

The paper focuses upon the organization of a federal state-funded pollution prevention project in the Styrian industry. The project includes 13 companies from the textile, pulp and paper, machine building, wood working and printed circuit board manufacturing industries, covering most of the sectors and sizes in the Styrian industry. It started in January 1994 and will last for one year. It will demonstrate the possibilities of pollution prevention and the need for further research work. This project will make use of the methods and tools that were refined in the Austrian Prepare project. As a first step, a systematic balance of all the inputs and outputs of a company is made, after which the weak points and inefficiencies of material and energy use are identified and the options for improvements, both economical and ecological, are defined. Consequently, modifications in products and production lead to a situation with less waste and emissions. The preliminary lessons from these projects are presented: as a rule, the utilities (consumption of process materials and water, cleaning, energy, preparatory and finishing steps) are treated as black boxes and usually represent a considerable optimization potential. In these areas especially there is usually a lack of information and coordination as well as a need for a systematic and comprehensive approach. Leadership in the company and creative consultants are needed for starting lasting successful pollution prevention projects.     

Distribution of actinomycetes in oil contaminated ultisols of the Niger Delta (Nigeria)

The distribution of actinomycetes in oil contaminated sandy loam ultisols of the Niger Delta region of Nigeria was studied to aid in understanding the effect of hydrocarbons on indigenous microbial population in tropical soils. The average total counts of actinomycetes in all the oil samples analysed was 103 cfu/g. Higher counts of actinomycetes were observed during the dry season than during the wet season. The counts of hydrocarbonoclastic actinomycetes correlated positively with the total count of actinomycetes.The actinomycetes were generally restricted to the top soil(0-10 cm soil depth) although a seemingly deeper(down to 40 cm soil depth) distribution was noticed in the dry season. The isolates included oil degrading species of Actinoplanes, Norcadia,Streptomyces and Streptosporangium. Their high oil utilization ability indicates their positive potential and role in the bioremediation of oil-spilled soils.