Production and characterization of Komagataeibacter xylinus SGP8 nanocellulose and its calcite based composite for removal of Cd ions

Environmental Science and Pollution Research - In the present study, fermentative production of bacterial nanocellulose (BNC) by using Komagataeibacter xylinus strain SGP8 and characterization of...     

Natural deep eutectic solvent mediated pretreatment of rice straw: bioanalytical characterization of lignin extract and enzymatic hydrolysis of pretreated biomass residue

The present investigation demonstrated pretreatment of lignocellulosic biomass rice straw using natural deep eutectic solvents (NADESs), and separation of high-quality lignin and holocellulose in a single step. Qualitative analysis of the NADES extract showed that the extracted lignin was of high purity (>90 %), and quantitative analysis showed that nearly 60?±?5 % (w/w) of total lignin was separated from the lignocellulosic biomass. Addition of 5.0 % (v/v) water during pretreatment significantly enhanced the total lignin extraction, and nearly 22?±?3 % more lignin was released from the residual biomass into the NADES extract. X-ray diffraction studies of the untreated and pretreated rice straw biomass showed that the crystallinity index ratio was marginally decreased from 46.4 to 44.3 %, indicating subtle structural alterations in the crystalline and amorphous regions of the cellulosic fractions. Thermogravimetric analysis of the pretreated biomass residue revealed a slightly higher T _dcp (295 °C) compared to the T _dcp (285 °C) of untreated biomass. Among the tested NADES reagents, lactic acid/choline chloride at molar ratio of 5:1 extracted maximum lignin of 68?±?4 mg g^?1 from the rice straw biomass, and subsequent enzymatic hydrolysis of the residual holocellulose enriched biomass showed maximum reducing sugars of 333?±?11 mg g^?1 with a saccharification efficiency of 36.0?±?3.2 % in 24 h at 10 % solids loading.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Persistent organochlorine pesticide residues in animal feed

Animal products like milk and meat are often found to be contaminated with residues of persistent pesticides and other toxic substances. The major source of entry of these compounds to animal body is the contaminated feed and fodder. So, unless the residues are managed at this stage, it is very difficult to prevent contamination in milk and meat. Therefore, the status of residue level of most persistent organochlorinated pesticides (OCP) in feed and fodder should be monitored regularly. The frequency of occurrence and contamination levels of OCP residues in different kinds of animal concentrate feed and straw samples collected from Bundelkhand region of India were determined. Out of 533 total samples, 301 i.e. 56.47% samples were positive containing residues of different OCPs like hexachlorocyclohexane (HCH) isomers, dichlorodiphenyltrichloroethane (DDT) complex, endosulfan and dicofol. Among different HCH isomers, the mean concentration of ??-HCH was highest, and total HCH varied from 0.01 to 0.306 mg kg^???1. In case of DDT complex, i.e. DDD, DDE and DDT, the concentration ranged between 0.016 and 0.118 mg kg^???1 and the pp^| isomers were more frequently encountered than their op^| counterparts. Endosulfan was also found in some samples in concentration ranging from 0.009 to 0.237 mg/kg, but dicofol could be recorded in very few samples. Although feed samples were found to contain OC residues, after comparing their levels in positive samples with the limiting values of respective pesticides, only very few were found to exceed the threshold level. Otherwise, they were mostly within safe limits.     

Seasonal monitoring of heavy metals and physicochemical characteristics in a lentic ecosystem of subtropical industrial region, India

Assessment of seasonal changes in surface water quality is an important aspect for evaluating temporal variations of lentic ecosystem (lakes and reservoirs) pollution due to industrial effluent discharge. In this study, nine metals and 15 physicochemical parameters, collected from four sampling sites in a tropical lake receiving the discharge from thermal power plant, coal mine, and chloralkali industry, during the years from 2004 to 2005, were analyzed. For greater efficacy in monitoring of heavy metals, particle-induced X-ray emission has been used during present investigation. Different statistical techniques like analysis of variance, Pearson correlation, principal component analysis, and factor analysis were employed to evaluate the seasonal correlations of physicochemical parameters. Most of the metals and physicochemical parameters monitored in the present study exhibited high spatial and temporal variability. Pertaining to metal pollution, the most polluted site was Belwadah, i.e., waters and sediments had the highest concentration of all the relevant metals. The reference site was characterized by the presence of low concentrations of metals in waters and in sediments. Based on the high metal concentration recorded in lake ambient, drinking, bathing, and irrigation water should not be used by the local people at the effluent discharge points.     

Cell cycle stage specific application of municipal landfill leachates to assess the genotoxicity in root meristem cells of barley (Hordeum vulgare)

Municipal solid wastes (MSW) are unavoidable sources of environmental pollution. Improper disposal of municipal waste results in the leaching of toxic metals and organic chemicals, which can contaminate the surface and ground water leading to serious health hazard. In this study, the toxic effects of the leachate prepared from municipal solid waste samples were examined in root meristem cells of barley (Hordeum vulgare L.) at various stages of cell cycle, i.e., G₁, S, and G₂. Seeds of barley were exposed to 2.5, 5, and 10 % of leachates in soil and aqueous media in 48 h at different cell cycle stages. The physicochemical data of the present study revealed that municipal solid waste leachate contains high amount of heavy metals, which significantly affected growth and physiological activities of barley. Significant inhibition in hypocotyl length, germination, and mitotic index were observed at all concentration of leachate treatment. Induction of chromosomal aberrations (CA’s) and micronuclei (MN) formation were also observed with different concentrations of leachate treatment at 7, 17, and 27 h of presoaking durations, which falls in G₁, S, and G₂ phase of the cell cycle, respectively. Also, exposure of leachate at S phase of the cell cycle had significant effects in barley through chromosomal aberration and micronuclei formation.     

Industrial energy prices and export competitiveness: evidence from India

Environmental Economics and Policy Studies - This paper empirically measures the impact of sectoral energy price differential between trading partners on Indian exports. Using dynamic gravity...     

Speciation of nitrogen in the coral reef sedimentary environment of Lakshadweep archipelago,Indian ocean

This paper focuses on the spatial distributional profiles of different species of the important micronutrient element, nitrogen (nitrite, nitrate and total nitrogen) in various coral-reef sedimentary environment of Lakshadweep Archipelago. The relative abundance of the three forms of nitrogen was in the order, total-N???nitrate-N???nitrite-N. Relatively very low levels of nitrite in the different microenvironments of the islands are an indication of a higher rate of nitrification, so as to produce thermodynamically most stable form of nitrogen, namely nitrate under the condition of well-oxygenated shallow coastal/lagoon waters. A lagoon-ward enrichment pattern of total nitrogen in the lagoon transects of Agathy, Minicoy, Kadamath and Kiltan Islands also reflected the fact that the rate and space available for nitrogen fixation in shallow zones of the lagoon are high. Further, the nitrogenous waste materials produced from the reefs and surrounding environments have limited exchange with the sea, and all these factors, together with the organic nitrogen retention capacity of sediment types, contribute to total nitrogen.     

Influence of environmental factors on biodegradation of quinalphos by <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis>

Background

The extensive and intensive uses of organophosphorus insecticide—quinalphos in agriculture, pose a health hazard to animals, humans, and environment because of its persistence in the soil and crops. However, there is no much information available on the biodegradation of quinalphos by the soil micro-organisms, which play a significant role in detoxifying pesticides in the environment; so research is initiated in biodegradation of quinalphos.

Results

A soil bacterium strain, capable of utilizing quinalphos as its sole source of carbon and energy, was isolated from soil via the enrichment method on minimal salts medium (MSM). On the basis of morphological, biochemical and 16S rRNA gene sequence analysis, the bacterium was identified as to be Bacillus thuringiensis. Bacillus thuringiensis grew on quinalphos with a generation time of 28.38 min or 0.473 h in logarithmic phase. Maximum degradation of quinalphos was observed with an inoculum of 1.0 OD, an optimum pH (6.5–7.5), and an optimum temperature of 35–37 °C. Among the additional carbon and nitrogen sources, the carbon source—sodium acetate and nitrogen source—a yeast extract marginally improved the rate of degradation of quinalphos.

Conclusions

Display of degradation of quinalphos by B. thuringiensis in liquid culture in the present study indicates the potential of the culture for decontamination of quinalphos in polluted environment sites.

     

Revised algorithm for estimating light extinction from IMPROVE particle speciation data

The Interagency Monitoring of Protected Visual Environments (IMPROVE) particle monitoring network consists of approximately 160 sites at which fine particulate matter (PM2.5) mass and major species concentrations and course particulate matter (PM10) mass concentrations are determined by analysis of 24-hr duration sampling conducted on a 1-day-in-3 schedule A simple algorithm to estimate light extinction from the measured species concentrations was incorporated in the 1999 Regional Haze Rule as the basis for the haze metric used to track haze trends. A revised algorithm was developed that is more consistent with the recent atmospheric aerosol literature and reduces bias for high and low light extinction extremes. The revised algorithm differs from the original algorithm in having a term for estimating sea salt light scattering from Cl(-) ion data, using 1.8 instead of 1.4 for the mean ratio of organic mass to measured organic carbon, using site-specific Rayleigh scattering based on site elevation and mean temperature, employing a split component extinction efficiency associated with large and small size mode sulfate, nitrate and organic mass species, and adding a term for nitrogen dioxide (NO2) absorption for sites with NO2 concentration information. Light scattering estimates using the original and the revised algorithms are compared with nephelometer measurements at 21 IMPROVE monitoring sites. The revised algorithm reduces the underprediction of high haze periods and the overprediction of low haze periods compared with the performance of the original algorithm. This is most apparent at the hazier monitoring sites in the eastern United States. For each site, the PM10 composition for days selected as the best 20% and the worst 20% haze condition days are nearly identical regardless of whether the basis of selection was light scattering from the original or revised algorithms, or from nephelometer-measured light scattering.