An intelligent data collection tool for chemical safety/risk assessment

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is the new European chemical legislation which aims to assess risk or safety of tens of thousands of chemicals to improve the protection of human health and the environment. The chemical safety assessment process is of an iterative nature. First, an initial, worst-case assessment is conducted after which refinements are made until no risk has been estimated or the risk is adequately controlled. Wasting time and resources on additional testing and implementing risk management measures with low effect on risk conclusions should be avoided as much as possible. This paper demonstrates the usefulness of an intelligent data collection strategy based on a sensitivity (and uncertainty) analysis on the risk assessment model EUSES to identify and order the most important "within-EU-TGD-reducible" input parameters influencing the local and regional risk characterisation ratios. The ordering can be adjusted for the costs involved in additional testing (e.g. ecotoxicity, physico-chemical properties, emission estimates, etc.). The risk refinement tool therefore reduces the resources needed to obtain a realistic risk estimate (both less conservative and less uncertain) as efficient as possible.     

Hydroponic phytoremediation of Cd, Cr, Ni, As, and Fe: can Helianthus annuus hyperaccumulate multiple heavy metals?

Sundance sunflowers were subjected to contaminated solutions containing 3, 4, or 5 heavy metals, with and without EDTA. The sunflowers exhibited a metal uptake preference of Cd=Cr>Ni, Cr>Cd>Ni>As and Fe>As>Cd>Ni>Cr without EDTA and Cr>Cd>Ni, Fe>As>Cd>Cr>Ni with EDTA. As uptake was not affected by other metals, but it decreased Cd and Ni concentration in the stems. The presence of Fe improved the translocation of the other metals regardless of whether EDTA was present. In general, EDTA served as a hindrance to metal uptake. For the experiment with all five heavy metals, EDTA decreased Cd in the roots and stems from 2.11 to 1.36 and from 2.83 to 2.3 2mg g(-1) biomass, respectively. For the same conditions, Ni in the stems decreased from 1.98 to 0.94 mg g(-1) total metal uptake decreased from 14.95 mg to 13.89 mg, and total biomass decreased from 2.38 g to 1.99 g. These results showed an overall negative effect in addition of EDTA. However it is unknown whether the negative effect was due to toxicity posed by EDTA or the breaking of phytochelatin-metal bonds. The most important finding was the ability of Sundance sunflowers to achieve hyperaccumulator status for both As and Cd under all conditions studied. Ni hyperaccumulator status was only achieved in the presence of three metals without EDTA.     

Do wood mice (Apodemus sylvaticus L.) use food selection as a means to reduce heavy metal intake?

Food preference of wood mice from two with heavy metals polluted sites and two unpolluted sites was tested under laboratory and field conditions with two-way choice experiments. In the laboratory, wood mice preferred to eat acorns from unpolluted sites over acorns from polluted sites. Previous experience with polluted food had no influence on food choice. Preference was negatively related to acorn metal content. Furthermore, the nutrient content of the acorn endosperm was consistently lower in polluted sites. We therefore conclude that wood mice used absolute metal concentration in the acorn, nutrient content, or both as a food selection cue. The results of the laboratory experiment could not be confirmed under field conditions. We hypothesized that search time constraints due to the presence of predators, competitors and/or other stress factors in the field have prevented the mice to forage selectively.     

Spatial and temporal analysis of pesticides concentrations in surface water: pesticides atlas

Dutch water boards have a well-established program for monitoring pesticide contamination of surface waters. These monitoring data have been processed into a graphic format accessible online and designed to provide insight into pesticide presence in Dutch surface waters and trends over time: the Pesticides Atlas (http://www.pesticidesatlas.nl). With this tool one can easily get maps of where a pesticide is being measured and where it might possibly constitute an environmental problem over the years. Presently, results of the periods 1997/1998 until 2005/2006 are available at the level of individual active ingredients. At a national level, the percentage of pesticides concentrations that exceed the maximum tolerable risk has declined 30% to 38% over the years 2003/2004 compared with 1997/1998. This means that surface water quality in the Netherlands has improved with respect to pesticides, however there are still many locations at which the measured concentrations exceed the environmental quality standards. The results on linking land use to pesticides concentrations were shown to assist in optimization of monitoring programs. By developing the present Internet tool, many new opportunities for environmental risk assessment and risk management were identified, e.g. optimization of monitoring strategies and communication to policymakers.     

Macroinvertebrate community response to acid mine drainage in rivers of the High Andes (Bolivia)

Several High Andes Rivers are characterized by inorganic water pollution known as acid mine drainage (AMD). The aim of this study was to assess the relationship between metal concentrations in the sediments and the macroinvertebrate communities in two river basins affected by AMD. In general, the taxon diversity of the macroinvertebrate community at the family level was low. The concentrations of Cd, Cu, Zn, Pb and Ni at mining sites were higher than at unpolluted sites. The pH of the water was alkaline (7.0-8.5) in unpolluted sites, whereas it dropped to very low values (<3) at mining sites. Redundancy Analysis (RDA) showed that pH was the best predictor of macroinvertebrate community richness. The number of macroinvertebrate families decreased gradually with increasing acidity, both in pools and riffles, though it is suggested that riffle communities were more affected because they are in closer contact with the acid water.     

Metal immobilization in soils using synthetic zeolites

In situ immobilization of heavy metals in contaminated soils is a technique to improve soil quality. Synthetic zeolites are potentially useful additives to bind heavy metals. This study selected the most effective zeolite in cadmium and zinc binding out of six synthetic zeolites (mordenite-type, faujasite-type, zeolite X, zeolite P, and two zeolites A) and one natural zeolite (clinoptilolite). Zeolite A appeared to have the highest binding capacity between pH 5 and 6.5 and was stable above pH 5.5. The second objective of this study was to investigate the effects of zeolite addition on the dissolved organic matter (DOM) concentration. Since zeolites increase soil pH and bind Ca, their application might lead to dispersion of organic matter. In a batch experiment, the DOM concentration increased by a factor of 5 when the pH increased from 6 to 8 as a result of zeolite A addition. A strong increase in DOM was also found in the leachate of soil columns, particularly in the beginning of the experiment. This resulted in higher metal leaching caused by metal-DOM complexes. In contrast, the free ionic concentration of Cd and Zn strongly decreased after the addition of zeolites, which might explain the reduction in metal uptake observed in plant growth experiments. Pretreatment of zeolites with acid (to prevent a pH increase) or Ca (to coagulate organic matter) suppressed the dispersion of organic matter, but also decreased the metal binding capacity of the zeolites due to competition of protons or Ca.     

Trace contamination with dioxin-like chemicals: evaluation of bioassay-based TEQ determination for hazard assessment and regulatory responses

Many recent dioxin contamination events have been traced back to poisoned animal feed or feed ingredients. Therefore, enforcement authorities placed limits on the levels of dioxins in food and feed or implemented strict monitoring and control programs. The levels in force are generally expressed as TEQ values, which inherently accepts the underlying hypothesis that the effects of dioxin-like chemicals are additive. TEQ determination involves either chemo-analysis, with high-resolution gas chromatography in combination with high-resolution mass spectroscopy, or bio-analysis. Bio-analytical methods, more particularly the reporter gene expression method CALUX, are advantageous due to their high throughput rate and low cost. Moreover, the CALUX methodology detects the overall dioxin-like toxicity, rather than the limited number of compounds investigated by chemo-analysis. Bioanalytical methods such as CALUX also differ from chemo-analysis in that the contribution of antagonistic as well as synergistic effects, which violate the additivity principle, can be detected. The application of bio-analytical methods can facilitate a broader assessment of public health risks by intensifying the current monitoring programs in terms of both sample numbers and types. Bio-analysis provides information on the total dioxin-like activity of the samples under study (hazard assessment); however, chemo-analysis is still needed to identify the predominant contaminants (congener identification) for risk management.     

Ants as Indicators of Exposure to Environmental Stressors in North American Desert Grasslands

The relative abundance of ant species was measured by pit-fall trapping at 44 sites in southern New Mexico and southeastern Arizona, U.S.A.. Sites were selected for study based on documentation of a history of disturbance or protection from disturbance, exposure to varying intensities of livestock grazing, dominance by an exotic species of plant and vegetation change resulting from disturbance or restoration efforts. Ant community composition, relative abundances of species, and species richness were the same on disturbed and undisturbed sites. None of the metrics based on hypothesized responses of ants to disturbance clearly distinguished between disturbed and undisturbed sites. Ant communities on sites where restoration efforts have resulted in distinct differences in vegetative cover and composition were similar to the ant communities on degraded unrehabilitated sites on the same soil type. Ant communities in riparian cottonwood gallery forests in Arizona and New Mexico were similar but differed from the assemblages in exotic salt cedar and native ash riparian woodlands. Ant species exhibited remarkable resistance to human-induced disturbances in these rangeland areas. In grasslands dominated by the South African grass, Eragrostis lehmanniana Nees, large seed harvesting ants, Pogonomyrmex spp., were greatly reduced in abundance compared to native grasslands. Other ant metrics were not different in E. lehmanniana grasslands and native grasslands. We conclude that ants cannot be used as indicators of exposure to stress, ecosystem health or of rehabilitation success on rangeland ecosystems. Ants are also not useful indicators of faunal biodiversity in rangeland ecosystems.     

Space-time statistics for environmental and agricultural related phenomena

This paper presents an overview of space-time statistical procedures to analyse agricultural and environmental related phenomena. It starts with an application on root-rot development in cotton. Dependence modelling in space and time is done with the space-time variogram. Various kriging interpolators are presented for making predictions in space and time. Simulated annealing is used to design an optimal monitoring network for estimation of space-time variograms. In the application no clear indication was found for anisotropy, although strong evidence exists that the disease not only proceeds within rows but also jumps between rows. The optimal sampling scheme showed a spatial clustering of observations at the first and the last monitoring day and less observations at intermediate times.     

Developments in remote sensing, dynamic modelling and GIS applications for integrated coastal zone management

The International Institute for Aerospace Survey and Earth Sciences (ITC) has a research programme that should result in an integrated environmental coastal zone management system through three subprojects. The programme aims to develop methodologies and tools for assessing coastal zone changes, and for the evaluation of scenarios for coastal zone management, based on a spatio-temporal Geographical Information System (GIS) working platform which integrates remote sensing data, physical-morphodynamic and eco-hydrologic modelling, and a decision support system. The first subproject develops methodologies for the generation of optimum Remote Sensing (RS) data sets, leading to better interpretation and complementary use of conventional and new remote sensing imagery. It also integrates RS, GIS, and modelling through hypothesis generation, parameter estimation, evaluation and validation. The second subproject facilitates qualitative and quantitative analysis and prediction of the physical aspects of coastal landscape development under the influence of natural processes and human impacts. This subproject is based on the application of remote sensing and dynamic modelling. The third subproject leads to a spatio-temporal working platform which supports data integration of RS and in-situ measurements, and qualitative and quantitative analysis for the prediction of coastal landscape development. Both support decision making in Integrated Coastal Zone Management.